1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair
New stock style upper control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes a pair with cross shafts, bushings, and ball joints installed. These are made from heavy gauge steel and...
1955-57 Chevy Bel Air, 150, 210; Lower Tubular Control Arms; Pair
Tubular control arms are designed for maximum strength and visual impact. These control arms are designed for a stock replacement offering a great look. All arms capture both sides of the bushing, unlike the originals that...
1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 1" Diameter
These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of the above without affecting your ride quality. Kit...
Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1955-64 Chevy Bel Air, 150, 210, Biscayne, Impala; Lower Control Arm Bushing Set; 4 Piece Set
Reproduction of the original lower control arm bushings designed for use with 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your...
1955-57 Chevrolet Passenger Car Tubular Control Arm Set Upper and Lower
These tubular control arms are designed for maximum strength and enhance the handling performance of 1955-57 Chevrolet passenger car models. These arms are not only stronger and lighter weight than the factory arm, they also...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1955-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber
OER® reproduction of the original sway bar end link designed for use with various 1955-2005 GM car and truck models. Replace the sway bar end links and eliminate issues associated with worn out links. Each sway bar link...
Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
Emblem Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 8 speed nuts without...
Speed Nut Set ; 5/16" ; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 4 speed nuts without...