1964-66 Ford Mustang; Tail Lamp Panel; EDP Coated
Reproduction of the original taillight panel for use with 1964 1/2-1966 Mustangs. Each panel is manufactured in heavy gauge stamped steel as original featuring correct mounting points and pre-drilled for trunk lock...
1978-81 Camaro; Rear Body Panel Extension
Add a performance appearance to your 1978-81 Camaro with this one piece wrap-around rear body panel extension for 1978-81 Chevrolet Camaro models. This item is manufactured in quality, automotive-grade urethane material that...
1967 Mustang; Tail Lamp Panel; Eleanor Style; For Sequential Cougar Tail Lamps
This tail lamp panel is used with sequential or Eleanor style (1967 Cougar) tail lamps on 1967 Mustangs. Will fit any 1967 Mustang as long as the correct Shelby style tail lamps are used. Each rear tail panel is produced in...
1970-71 Plymouth Barracuda, Cuda; Rear Tail Lamp Panel; EDP Coated
Reproduction of the original rear tail lamp panel for use with 1970-71 Plymouth Barracuda and Cuda models. Each panel is manufactured in quality stamped steel to correct factory specifications featuring correct contours...
1967 Tempest, Lemans, GTO; Tail Panel
Reproduction rear tail lamp panel for 1967 Tempest, Lemans, GTO models. Manufactured in quality stamped steel to correct factory dimensions. Features correct openings for tail light assembly. Comes finished in black EDP...
1962-64 Chevy II, Nova; Rear Tail Panel
Reproduction rear tail panel for 1962-64 Chevy II Nova models. Manufactured in quality stamped steel replicating the original configuration and design. Features correct mounting points and pre-drilled holes where required....
1969 Chevelle; Malibu; Taillamp Panel; All Models Except Station Wagon
Reproduction taillamp panel for 1969 Chevrolet Chevelle and Malibu models except Station Wagon. Manufactured to factory specifications, this steel panel installs between the rear quarter panels and serves as the mounting...
1969 Mustang Tail Lamp Panel (w/o Shelby)
Reproduction of the original 1969 Mustang taillight panel produced in heavy gauge stamped steel and finished in EDP coating. It mounts between the quarter panels at the rear of the car and provides a secure mounting point for...
1968 Chevelle; Malibu; Taillamp Panel; All Models Except Station Wagon
Reproduction taillamp panel for 1968 Chevrolet Chevelle and Malibu models except Station Wagon. Manufactured to factory specifications, this steel panel installs between the rear quarter panels and serves as the mounting...
1966 Chevelle; Malibu; Taillamp Panel; All Models Except Station Wagon
Reproduction taillamp panel for 1966 Chevrolet Chevelle and Malibu models except Station Wagon. Manufactured to factory specifications, this steel panel installs between the rear quarter panels and serves as the mounting...
1964 Impala, Bel Air, Biscayne; Rear Tail Panel; EDP Coated
Reproduction of the original rear til panel designed for use with 1964 Chevrolet Impala, Bel Air, and Biscayne models. Each tail panel is manufactured in stamped steel to original factory specifications featuring correct...
1967 Chevelle, Malibu; Rear Tail Lamp Body Panel
Reproduction rear tail lamp panel for 1967 Chevelle, Malibu models. Manufactured in quality stamped steel to correct factory dimensions. Features correct openings for tail light assembly. Comes finished in black EDP coating...
1970-72 Chevelle; Malibu; Tail Panel; Rear Lower; Replaces GM# 9861449
Reproduction rear body panel for 1970-72 Chevelle and Malibu models. Each rear panel is manufactured in quality stamped steel to factory specifications featuring correct contours for an authentic appearance and fit. Features...
1973-87 Chevrolet, GMC Pickup Truck; Fleetside; Rear Tail Pan; Complete
Reproduction rear tail panel for 1967-87 Chevrolet and GMC Fleetside Pickup trucks with steel bed floor. Replaces rusted or damaged panel completely. Manufactured in stamped steel. Features and Benefits: Direct replacement...
1971-73 Mustang; Tail Lamp Panel; EDP Coated
Reproduction of the original style tail light panel for use with 1971-73 Ford Mustang models. Each tail light panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
1973-79 Ford Styleside Pickup Truck; Rear Tail Pan Assembly
Reproduction pickup bed rear tail pan assembly for 1973-79 Ford F-series styleside pickup trucks. Located at rear of the bed, this is the heavy rear cross sill brace that finishes off the very back end of the bed behind the...
1967-68 Ford Mustang; Tail Lamp Panel; No Trunk Corners
Reproduction taillight panel manufactured using heavy gauge stamped steel. Mounts between the quarter panels at the rear of the car and provides a secure mounting point for the taillights and fuel filler pipe. Fits 1967-68...
1955-57 Chevrolet Sedan And Hardtop Tail Panel
Reproduction tail panel for 1955-57 Chevrolet models except wagon, delivery or utility vehicles. Manufactured from heavy gauge sheet metal. This piece will add structural integrity to your trunk area. Note: Shipped oversize....
1965 Chevelle, Malibu; Taillamp Panel Extesion; All Models Except Station Wagon; RH
Reproduction RH taillamp panel extension for 1965 Chevrolet Chevelle and Malibu models except Station Wagon. Manufactured to factory specifications, this steel extension panel installs between the quarter panel and center...
1968-69 Chevelle, Malibu; Trunk Latch Mechanism Mounting Bracket/Taillamp Panel Support Brace
Reproduction trunk latch mechanism mounting bracket/taillamp panel support brace for 1968-69 Chevrolet Chevelle and Malibu models. Manufactured to factory specifications, this steel bracket installs at the center of the rear...
1964-65 Chevelle, Malibu; Trunk Latch Mechanism Mounting Bracket/Taillamp Panel Support Brace
Reproduction trunk latch mechanism mounting bracket/taillamp panel support brace for 1964-65 Chevrolet Chevelle and Malibu models. Manufactured to factory specifications, this steel bracket installs at the center of the rear...
1964-66 Mustang; Tail Lamp Panel Brace; Coupe, 2+2
Reproduction of the original tail lamp panel brace designed for use with 1964-66 Ford Mustang coupe and 1965-66 2+2 fastback models. Each brace is manufactured in stamped steel to original factory specifications featuring...
1964-66 Mustang; Tail Lamp Panel Brace; Convertible; EDP Coated
Reproduction of the original tail lamp panel brace designed for use with 1964-66 Ford Mustang convertible models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for...
1980-96 Ford Bronco; Rear Cross Sill Panel
Reproduction rear cross sill panel for 1980-96 Ford Bronco. Located at rear of the bed, this is the heavy cross sill brace that finishes off the very back end of the bed behind the tailgate. This stamped 15 gauge steel panel...
1982-84 Camaro; Rear Body Panel Extension; 2 Piece Design
Add a racing look to the rear profile of your third-gen Camaro with this premium 2-piece rear body panel extension, specifically engineered for 1982?1984 models. This extension delivers the fit and detail offering an upgraded...
1965 Chevelle, Malibu; Rear Tail Panel Assembly
Reproduction rear tail panel for 1965 Chevelle and Malibu models except wagon. Manufactured in quality stamped steel replicating the original configuration and design. Features correct mounting points and pre-drilled holes...
1968 Mustang; Tail Lamp Panel; California Special; Stamped Steel; EDP Coated
This is a steel replacement tail lamp panel made specifically for 1968 Mustang running sequential Shelby style (1965 Thunderbird) tail lamps. Will fit any 1968 Mustang as long as the correct Shelby style tail lamps are used....
1970-72 Nova; Rear Tail Light Panel
Reproduction of the original rear tail lamp panel designed for use on 1970-72 Chevrolet Nova models. Manufactured in quality stamped steel and replicates the original panel exactly. Each panel is die-cut for the tail lamps...
1973-74 Chevrolet Nova; Tail Light Panel; EDP Coated
Reproduction of the original tail lamp panel designed for use with 1973-74 Chevrolet Nova models. Manufactured in stamped steel replicating the original OE panel in quality and design. Finally there's a solution to the rusty...
1970 Mustang; Tail Lamp Panel ; EDP Coated
Reproduction of the original style tail light panel for use with 1970 Ford Mustang models. Each tail light panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1964-65 Chevelle, Malibu; Rear Tail Panel Center Portion
Reproduction rear tail panel center section for 1964-65 Chevelle and Malibu models except wagon. Manufactured in quality stamped steel replicating the original configuration and design. Features correct mounting points and...
1968-69 Chevy II, Nova; Rear Tail Light Panel
Reproduction rear tail lamp panel for 1968-69 Chevy II and Nova models. Manufactured in quality stamped steel to correct factory dimensions. Features correct openings for tail light assembly. Comes finished in black EDP...
1980-86 Ford F-100, F-150, F-250, F-350; Tail Pan Assembly; Rear Cross Sill Panel
Reproduction pickup bed tail panelor rear cross sill panel for 1980-86 Ford F-series styleside pickup trucks. Located at rear of the bed, this is the heavy cross sill brace that finishes off the very back end of the bed...
1963 Impala, Bel Air, Biscayne; Rear Tail Panel; EDP Coated
Reproduction of the original rear til panel designed for use with 1963 Chevrolet Impala, Bel Air, and Biscayne models. Each tail panel is manufactured in stamped steel to original factory specifications featuring correct...
Reproduction of the original tail lamp mounting panel designed for use with 1963 Chevrolet Impala, Bel Air, and Biscayne except station wagon models. Each panel is manufactured in quality original gauge, stamped steel to...
1965 Chevelle, Malibu; Taillamp Panel Extesion; All Models Except Station Wagon; LH
Reproduction LH taillamp panel extension for 1965 Chevrolet Chevelle and Malibu models except Station Wagon. Manufactured to factory specifications, this steel extension panel installs between the quarter panel and center...
1974-81 Camaro, Firebird; Rear Tail Panel Brace; EDP Coated
Reproduction of the original rear tail panel brace for use with 1974-81 Camaro and Firebird models. Each brace is manufactured from high-quality stamped steel to original factory specifications, featuring correct contours,...
1967-91 Chevy, GMC; Pickup Truck; Fleetside; Rear Tail Pan Repair Panel; Outer Patch Only
Rear tail panel repair panel for various 1967-91 Chevrolet and GMC Fleetside Pickup trucks (1967-72 with steel bed floor). Replaces rusted or damaged outer portion of the panel. Manufactured in stamped steel. Chevrolet...
1970 Chevrolet Nova; Trunk Gutter Side Brace; RH Passenger Side
Reproduction of the original trunk gutter side brace for use with 1970 Nova models. Each brace is designed and manufactured to replicate the original configuration and dimensions offering an authentic appearance and fitment....
1964-65 Chevelle, Malibu, Trunk Gutter to Taillamp Panel Lower Corner Brace; RH
Reproduction RH trunk gutter to taillamp panel lower corner brace for 1964-65 Chevrolet Chevelle and Malibu models. Manufactured to factory specifications, this steel brace installs at the lower corner where the trunk gutter...
1964-65 Chevelle, Malibu, Trunk Gutter to Taillamp Panel Lower Corner Brace; LH
Reproduction LH trunk gutter to taillamp panel lower corner brace for 1964-65 Chevrolet Chevelle and Malibu models. Manufactured to factory specifications, this steel brace installs at the lower corner where the trunk gutter...
1966-67 Chevy II, Nova Nova; Rear Tail Panel; EDP Coated
Reproduction rear tail panel for 1966-67 Chevy II and Nova models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit. Includes...
1970-73 Chevrolet Camaro; Rear Body Panel; OER Premier; Show Quality
Premier quality reproduction rear body panel for 1970-73 Chevrolet Camaro models. Each panel is manufactured from high-quality stamped steel to original factory specifications, featuring precise contours and dimensions for an...
1964 Impala; Tail Lamp Mounting Panel; EDP Coated; Drivers Side
Reproduction of the original tail lamp mounting panel designed for use with 1964 Impala models. Each tail lamp panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
1964-66 Ford Mustang; Rear Lower Valance Panel; With Holes for Dual Exhaust and Backup Lamps
Reproduction of the original rear lower valance panel for 1964-66 Mustang models with dual exhaust. Each valance panel is manufactured in stamped steel and features correct contours and dimensions making this a great...
1967-68 Mustang; Rear Valance Panel; GT, Dual Exhaust; EDP Coated
Reproduction of the original rear lower valance panel designed for use on 1967-68 Mustang GT models with dual exhaust. Each valance panel is manufactured and stamped from steel as original. Includes correct contours and...
1967-68 Mustang; Rear Lower Valance Panel; Standard; with Back-Up Lamp Holes; EDP Coated
Quality reproduction of the original rear lower valance panel designed for use with 1967-68 Mustang standard (non-GT) models. Each valance panel is manufactured in stamped steel to original factory specifications featuring...
1967-68 Camaro, Firebird; Trunk Floor to Rear Panel Inner Brace; RH or LH; Each; EDP Coated
Reproduction of the original trunk floor to rear panel brace designed for use with 1967-68 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours...
1963 Impala; Tail Lamp Mounting Panel; EDP Coated; Drivers Side
Reproduction of the original tail lamp mounting panel designed for use with 1963 Impala models. Each tail lamp panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
Reproduction of the original rear tail lamp mounting panel designed for use with 1966-67 Chevy II and Nova models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for...
1969 Camaro, Firebird; Trunk Floor to Rear Panel Inner Brace; RH or LH; Each; EDP Coated
Reproduction of the original trunk floor to rear panel brace designed for use with 1969 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for...
1970-73 Camaro, Firebird; Tail Panel Brace; with EDP Coating
Reproduction of the original tail panel brace designed for use on 1970-73 Camaro and Firebird models. This brace is an essential component for any trunk area restoration, providing critical support and structure to the rear...
1971-73 Mustang; Rear Valance Panel; with Dual Exhaust
Reproduction of the original rear lower valance panel designed for use on 1971-73 Mustangs with dual exhaust. Each valance panel is manufactured in stamped steel to original factory speciifcations featuring correct contours,...
1967-68 Mustang Fastback; Quarter Panel Extension Bracket; Passenger Side
Reproduction stamped steel quarter panel extension bracket, also known as a tail light mounting panel. This panel provides the structure for the left rear quarter panel and tail lamp panel to weld to. Often rusted or damaged,...
Reproduction of the original rear lower valance panel for 1964-66 Mustang models with dual exhaust. Each valance panel is manufactured in stamped steel and features correct contours and dimensions making this a great...
1965-66 Mustang Fastback; Tail Lamp Mounting Panel; Passenger Side; EDP Coated
Reproduction of the original style tail lamp mounting panel also known as the quarter panel extension bracket for use with 1965-66 Mustang fastback models. Each panel is manufactured in stamped steel to the correct factory...
1965-66 Mustang Fastback; Tail Lamp Mounting Panel; Drivers Side; EDP Coated
Reproduction of the original style tail lamp mounting panel also known as the quarter panel extension bracket for use with 1965-66 Mustang fastback models. Each panel is manufactured in stamped steel to the correct factory...
1970-74 Barracuda; Tail Lamp Reinforcement Bracket; LH
Reproduction of the original tail lamp reinforcement bracket designed for use with 1970-74 Plymouth Barracuda and Cuda models. Each panel is manufactured from stamped steel to the correct onfiguration offering an authentic...
1970-74 Barracuda, Cuda; Tail Lamp Reinforcement Bracket; RH
Reproduction of the original tail lamp reinforcement bracket designed for use with 1970-74 Plymouth Barracuda and Cuda models. Each panel is manufactured from stamped steel to the correct onfiguration offering an authentic...