1967 Camaro SS, 1968-72 Nova SS; Hood Louvers; with Hardware; RH & LH; Pair; "Show Quality"
Reproduction hood louvers for 1967 Camaro SS and 1968-72 Nova SS models. Each hood louver is manufactured in quality die-cast zinc replicating the original design, appearance, and fitment. Features correct black paint scheme,...
1968-69 Camaro SS; Hood Louver Ornament Set; with Hardware; Pair; "Show Quality"
Reproduction of the original die-cast hood louvers designed for use with all 1968-69 Camaro Super Sport models equipped with a 350 or 396 engine. Manufactured with OER® exclusive tooling to exact factory specifications....
1971-72 Pontiac GTO, LeMans; Ram Air Upper Hood Pan; Stamped Steel
Reproduction steel hood pan for 1971-72 Pontiac GTO and LeMans models with Ram Air. This pan is manufactured in quality stamped steel with the correct bends and pre-drilled holes for authenticity and ease of installation....
1969 Pontiac Firebird; 400 Ram Air Flapper Door Assembly
Reproduction of the Ram Air flapper door assembly for use on 1969 models with a 400 Ram Air hood. This assembly is functional and will allow air to pass through your hood. The 400 Ram Air flapper door assembly operates with...
1968-72 Chevy Nova SS; Hood Louver Kit; with Bezel, Gaskets, Hardware
OER® reproduction hood louvers for 1968-72 Nova Super Sport models. Each cast hood louver is finished in black with bright chrome accents for an authentic appearance. Includes all necessary mounting hardware and chrome...
1968-72 Nova Super Sport; Hood Louver Bezel; Die-Cast Chrome; Each
Quality reproduction hood louver bezels for 1968-72 Chevrolet Nova SS models. Each bezel is manufactured to original factory specifications in quality die-cast zinc featuring a bright chrome finish and correct mounting tabs...
1969-70 Pontiac GTO; Ram Air; Flapper Door
Injection molded high quality part that includes the flapper housing, metal door bushing and tabs. Fits 1969 and 1970 GTO Ram Air III / Ram Air IV or standard motor if upgrading to Ram Air on the vehicle. Bolts up to factory...
1967-69 Firebird 400; Hood Inserts; Closed Vent Style; Pair
Reproduction hood insert set for 1967-69 Firebird 400 models. These inserts are manufactured in die-cast metal and can be mounted directly into any original GM or reproduction 1967-69 Firebird 400 hood. Hardware available...
1970-74 Dodge Challenger R/T ; Hood Inserts; Pair
Reproduction of the original hood inserts designed for use with 1970-74 Dodge Charger models. These replacement Hood Inserts are manufactured with quality die-cast zinc and are an excellent replacement for missing or damaged...
1969 Pontiac Trans Am; Hood Scoop Inserts; Fiberglass; RH & LH; Pair
Reproduction hood scoop inserts for 1969 Pontiac Trans Am models. Manufactured from fiberglass, these inserts fit into the two slots at the front of the Trans Am hood and secure to the hood with integrated mounting studs....
1966 Chevelle SS, El Camino SS; Hood Louver Bezel Base; Without Insert; LH
Quality reproduction hood louver bezels for 1966 Chevrolet Chevelle SS or El Camino SS models. Each bezel is manufactured to original factory specifications in quality die-cast zinc featuring a paintable finish designed to be...
1969-72 Buick Skylark, GS, GS 455, 1969 GS 350, GS 400; Ram Air Hood Seal Scoop Plates; Pair
These special plastic plates are a must for various 1969-72 Buick GS, GS 455, GS 400 models equipped with ram air. They attach to the underside of the hood and create a flat area for the air cleaner foam seals to press up...
1969 Oldsmobile Cutlass, 442; Diecast OEM Front Hood; Center Tongue; GM# 403961
Replacement hood center hood tongue for 1969 Oldsmobile Cutlass and 442 models. This is the metal extension for between the grilles attaches to the hood. It bolts directly to the hood. It is made from high quality Die-Cast...
1968-72 Chevrolet Nova SS; Hood Louver Brackets; Pair
Reproduction hood louver brackets for 1968-72 Chevrolet Nova Super Sport models. Manufactured in quality stamped steel replicating the original in design and appearance. The brackets are used to attach the hood louvers to the...
1969 Oldsmobile Cutlass, 442; ABS Plastic Front Hood; Center Tongue
Replacement hood center hood tongue for 1969 Oldsmobile Cutlass and 442 models. This is the extension for between the grilles attaches to the hood. It bolts directly to the hood. It is made from high quality ABS plastic. Sold...
1967 Impala, 1968-69 Camaro; SS Hood Louver Drains; Pair; Made in the USA!
Reproduction of the original Super Sport hood louver drain tubes for use with 1967 Impala SS, and 1968-69 Camaro Super Sport models. These drain tubes install under the hood substructure and are designed to direct water from...
1970-74 Plymouth Barracuda; Twin Bulge Hood Scoop Ornament Set
Reproduction of the original twin bulge hood scoop ornaments designed for use on 1970-74 Plymouth Barracuda models. Each hood ornament is manufactured to factory specifications for proper fitment and appearance. Includes 2...
1981-88 Buick Skylark, GS, GS 455; Hood Scoop Louver Insert; Bezel; Pair
Reproduction plastic hood louver insert bezel for 1970-72 Buick Skylark, GS and GS 455 models. These bezels are paint to match application and will accept both hood louver types. Sold in pairs.
1966 Chevelle SS, El Camino SS; Hood Louver Bezel Base; Without Insert; RH
Quality reproduction hood louver bezels for 1966 Chevrolet Chevelle SS or El Camino SS models. Each bezel is manufactured to original factory specifications in quality die-cast zinc featuring a paintable finish designed to be...
1970 Oldsmobile Cutlass, 442; ABS Plastic Front Hood; Center Tongue
Replacement hood center hood tongue for 1970 Oldsmobile Cutlass and 442 models. This is the extension for between the grilles attaches to the hood. It bolts directly to the hood. It is made from high quality ABS plastic. Sold...
1969-76 Camaro, Corvette, Trans Am; Cowl Induction Solenoid
Reproduction cowl induction solenoid assembly which allows the hood valve assembly to open and shut when the accelerator is depressed. Manufactured to exact specifications, each solonoid will install and function same as...
Reproduction under hood air cable for various 1969-70 Dodge, Plymouth B Body models with fresh air hood grabber, or Ram Air hood. Each cable is manufactured to original factory specifications offering an aithentic fit and...
1967-69 Camaro, 1968-72 Chevy II, Nova; Hood Louver Gasket; Each
Reproduction of the original hood louver gaskets that seal the hood louvers to the hood. These gaskets are manufactured to precisely replace the old or worn originals. Prevents water and other elements from seeping past the...
1970-71 Challenger, Barracuda, Cuda; Under Dash Air Cable; with Shaker Hood
Reproduction of the original under dash air cable designed for use with 1970-74 Dodge Challenger, Plymouth Barracuda, and Cuda models. Each cable is manufactured to correct factory specifications specifically for the Shaker...
1969 Pontiac Trans Am; Hood Scoop Inserts; Urethane; RH & LH; Pair
Reproduction hood scoop inserts for 1969 Pontiac Trans Am models. Manufactured from urethane, these inserts fit into the two slots at the front of the Trans Am hood and secure to the hood with integrated mounting studs. These...
1971-73 Mustang; Hood Scoop Inserts; Pair
Reproduction metal hood scoop inserts for the 1971-73 NASA (or NACA) style hood. On Mustang models with the "dual ram induction" package, these scoops were functional and would direct fresh air into the intake system. Other...
1985-90 Camaro, Z28, IROC; Hood Louver Ornaments; with Hardware; RH & LH; Pair; OER Reproduction
OER® reproduction of the original hood louver ornaments / louvers designed for use on 1985-90 Camaro Z28 and 1987 IROC models. Each louver is manufactured to correct factory specifications creating a reproduction that is...
1967-68 Ford Mustang; Turn Signal Hood Insert; LH
Reproduction of the original die-cast metal hood turn signal insert, with grill, manufactured to original factory specifications. Each turn signal insert comes with the die-cast metal housing, grille, and mounting hardware...
1967-68 Ford Mustang; Turn Signal Hood Insert; RH
Reproduction of the original die-cast metal hood turn signal insert, with grill, manufactured to original factory specifications. Each turn signal insert comes with the die-cast metal housing, grille, and mounting hardware...
1967-68 Ford Mustang; Hood-Mounted Turn Signal Lamp; LH Or RH
Reproduction of the original hood mounted turn signal lamp assembly designed for 1967-68 Mustang models. Replace your weathered original hood mounted turn signal lamp bodies with this quality reproduction that replicates the...