All Models - Results for K812 5

Reproduction rear outer corner cove moldings for 1963 Chevrolet Impala, Bel Air, and Biscayne models. Manufactured in quality stamped aluminum to OE specifications. These polished aluminum moldings act as an extension of the...

3/8-16 Grade 5 Hex Nut for use in a variety of locations where a Grade 5 hex nut is required Specifications: Screw Size : 3/8-16 Across Flats : 9/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness : C32 Max.

Add this OER® Authorized component to your order and your OER® "Secret Formula" Car Care System or "Grit Guard Washing System" becomes the perfect rolling detailers stool. This 5 caster, heavy duty dolly will support up to 250 lbs. and is equipped with three thumb screws for securing the bucket. Casters swivel 360 degrees and lock to prevent coasting on an incline. The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.

OER® Authorized Number One thinner is a Low VOC paint thinner used for the thinning and clean up of RustSeal and our other rust preventative coatings and paints. Make sure to only use #1 Thinner for the thinning of...

This 3/8" Grade 5 spring type (split) lock washer is zinc plated steel and is sold as each. Product Specifications Spring type lock washers Zinc plated Grade 5 Bolt size: 3/8"

Grade 5, size 1/2-13 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 1/2-13 Across Flats : 3/4" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness : C32 Max.

7/16" Split Lock Washer; Zinc; Grade 5.

These leaf spring liners promotes smooth, friction free spring operation once installed. Smooths and quiets the ride and prolongs life of the leaf springs. Also features shouldered excursion that ensures against liner creeping out of place. Replaces the existing liners on both RH and LH springs. 1 set required per vehicle. Applications: 1967-1969 Chevrolet Camaro (with 5 leaf springs) 1967-1969 Pontiac Firebird (with 5 leaf springs)

Reproduction of the original windshield moldings set designed for use on 1969-70 Mustang coupe models. Manufactured to exact factory specifications in polished aluminum, each set will replace the original exactly offering a great fit and authenticity. Includes all 5 windshield moldings. Mounting hardware sold separately. Refer to part number HK404. Ford Applications: 1969-1970 Ford Mustang (coupe) (5 piece set)

Reproduction of the original rear bumper brackets designed for use with 1967-68 Pontiac Firebird models. Each bracket is manufactured in stamped steel to factory configurations replicating the correct shape and original style mounting points. Will work with original GM bumpers or reproduction bumpers. 5 piece bracket set. Comes with black EDP coating for rust and corrosion prevention. Applications: 1967-1968 Pontiac Firebird (5 piece set)

Reproduction of the original exterior gaskets designed to replace the old or wornout originals on 1967 standard Camaros. This replacement gasket set includes both rear tail light lens to housing gaskets, the rear license lamp...

Reproduction of the original exterior gaskets designed to replace the old or worn out originals on 1968 standard Camaros. This replacement gasket set includes both rear tail light lens to housing gaskets, the rear license...

Reproduction of the original exterior lens gaskets designed to replace the old or worn out originals on 1969 standard Camaros. This replacement gasket set includes both rear tail light lens to housing gaskets, the rear...

Reproduction of the original dash knobs designed for use on 1968-69 Mopar B-Body models. Replace damaged or missing dash knobs with these quality reproductions. Features correct contours and chrome finish. Applications:...

Reproduction headliner bows for 1970-78 models. Installs into the inner roof panel and secures the headliner to the inner roof. Designed and manufactured to replace the originals exactly, these headliner bows feature correct...

Reproduction headliner bows for 1967-69 models. Installs into the inner roof panel and secures the headliner to the inner roof. Designed and manufactured to replace the originals exactly, these headliner bows feature correct...

The best way to get a high performance look on your 1982-84 base model Firebird is the addition of a complete aerodynamic ground effects set. Improve the aerodynamic efficiency while achieving an all new performance...

Correct reproduction of the original stamped stainless steel rear window molding set designed for various 1975-79 Nova and X-body GM models. Each molding is manufactured to exact factory specifications and designed to fit...

Reproduction of the original door molding clips designed for use with 1981-87 Buick Regal models. Each clips is manufactured in injection-molded ABS Replacement lower door molding clips for 1981-87 Regal Limited models. Will only fit the door moldings. Set of 5 clips. {fitment} Note: For clips sold individually see part # GN110786.

Replacement Rallye wheel center cap screws designed for use on the various listings below. If your Rallye wheel center cap is wobbling and making noise then these screws are the right fix. Includes 5 screws for use with 1 wheel. Applications: 1962-1962 Dodge Lancer 1963-1972 Dodge Dart 1971-1972 Dodge Demon 1964-1969 Plymouth Barracuda 1970-1972 Plymouth Duster 1971-1972 Plymouth Scamp 1962-1972 Plymouth Valiant

Reproduction of the original grill brackets designed for use with all 1965 Chevrolet Chevy II Nova models. Each bracket is manufactured in stamped steel to correct factory specifications. Brackets are designed to work with original factory grills, or OER reproduction grills. Each bracket includes a black EDP coating for rust and corrosion prevention. Includes all 5 brackets. {fitment}

Reproduction of the original windshield moldings designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality polished stainless steel to the correct factory configuration replicating the original moldings. Includes the upper molding, RH or LH side moldings, and RH and LH lower moldings. 5 piece molding set. Note: Mounting clips available separately. Refer to part number # K527 and # C78A for windshield molding clip sets {fitment}

When you begin a full restoration on your 1964-66 Mustang convertible you may discover rust on the inner structure of the body. This kit offers the brackets and bracing your Mustang needs for a strong structurally sound body. These are the hidden brackets behind the body that act as bracing for the Mustangs structure. A great way to ensure that your Mustang's inner structure will last years after the restoration! The brackets in this 5-piece kit are manufactured of high quality stamped steel, using up-to-date technology in order to achieve the most accurate fit. Rest assured this bracket kit will fit just like the original inner bracing. Applications: 1964-1966 Ford Mustang (5 piece set)

Highest quality reproduction on the market! Reproduction of the original windshield moldings designed for use on 1967-69 Camaro and Firebird modle. This complete windshield molding set is designed to replace all 5 windshield moldings on 1967-69 Camaro and Firebird coupe models. Each molding is manufactured to exact factory specifications and includes the upper windshield molding, RH and LH side moldings and the RH and LH lower moldings. Reproduced in original quality polished stainless steel offering an original appearance and factory fit. {fitment} Mounting clips available separately. Refer to part number # K527 for lower molding clip set and part number # C78A for upper and side molding installation clip set.

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the order. Reproduction 5-spoke "Mag" wheel originally installed on 1970-81 GM performance cars including 1970-81 Camaro Z28 models. Manufactured from steel and coated with correct style Shadow Gray paint for an authentic and original appearance. Specifications: Wheel size: 15" x 7" Lug pattern: 5 x 4-3/4" Backspacing: 4-1/4" Click here to learn how to measure Wheel Backspacing, Wheel Offset or Bolt Pattern. Also sold individually, see part # 3983045. Note: Wheel features a round hole for valve stem (some early versions featured an oval hole). Center caps, trim rings and lug nuts are not included but are available separately.Use part # A8500550 for a set of 20 stainless steel 7/16"-20 lug nuts. Application Notes: The Z28 wheel was originally installed on 1970-81 Z28 models but can be used on other GM models through 1981. Please make sure backspacing and lug bolt pattern are correct for your vehicle before ordering. Shipped overweight.

Reproduction of the original five blade fan designed for use with various 1965-70 Mustang small block V8 models as listed below. Each fan blade measures 17" diameter with 5/8" center hole. No fan clutch required for...

Correct reproduction headliner bows for all 1965-66 2-Door Fast Back models. Used to secure the headliner to the inner roof, these bows feature all correct materials, contours and bends as original. Color coded for easy...

Reproduction glass set for 1968-69 Camaro and Firebird models. Manufactured as an economical way to replace broken, scratched, or delaminating or cloudy original glass on your GM F-Body project car. Features the correct...

This specially designed lug nut set is made to last a lifetime. Each nut is identified by size directly on the head and case hardened completely through.The thread strength meets or exceeds OEM specifications. Sets include 5 lug nuts. Fits a variety of vehicle applications and wheel types. Measure approx. 1-3/8" tall. 3/4" chrome-plated hex head design. Sold as a set of 5 nuts.

OER® Authorized reproduction of the original instrument panel lens brackets designed for us on 1967-68 Mustang models. These lens brackets are specifically designed to act as lens retainers and replaces the original exactly offering an authentic appearance. This 5 piece set will replace all dash instrument lens brackets. {fitment}

OER Authorized standard style lug nut with dimensions of 7/16"-20. This is an uncapped nut that fits a wide variety of steel wheel applications where a hub cap covers the nut or where cosmetic appearance of the nut is not an issue and a capped nut or acorn nut is not needed. Comes as a set of 5 nuts.

Authentic reproduction of the original grill bracketry designed for use on 1964 Chevy II and Nova models. Each grill bracket replicates the original in quality and design. Set includes 5 OEM style brackets to replace the originals for any 1964 Chevy II / Nova model. Each bracket is manufactured from stamped steel and EDP coated black for rust prevention. Includes 2 rubber seal strips for installation. Applications: 1964-1964 Chevrolet Chevy II 1964-1964 Chevrolet Nova

Custom windshield molding set designed for use with 1970-81 Camaro and Firebird models. Manufactured to factory specifications, featuring original style contours and finished in a custom black anodized finish. Offers a custom performance appearance and fit same as original moldings. Refer to Part number # 270070 for back glass clip set. 5 piece set. {fitment}

OER® reproduction of the original front windshield reveal moldings designed to replace the front windshield moldings on 1965-67 Impala and 1966-67 Caprice models. Each molding is an exact replica of the original. Manufactured in polished stainless steel to factory specifications, each molding will fit and install correctly offering an authentic appearance. Perfect for replacing old or worn out originals. This 5 piece set includes 1 upper, 2 lower and 2 side moldings. Note: For use on 2 door hardtop models. Applications: 1965-1967 Chevrolet Impala (2 door hardtop) 1965-1967 Chevrolet Impala SS (2 door hardtop) 1966-1967 Chevrolet Caprice (2 door hardtop)

Reproduction of the original alternator brackets designed for use with 1969-74 Chevrolet big block models (396, 402, 427, 454). These OEM-replacement style alternator brackets are designed for use as replacements for worn, broken or missing originals. 5 piece set includes upper bracket, lower bracket. lower rear spacer, lower brace, and stud. Each bracket is manufactured from correct gauge stamped steel featuring a correct semi gloss black finish. The correct brackets for each year must be installed to allow for proper belt and pulley alignment. Each alternator is designed for a specific engine, therefore upper and lower alternator brackets cannot be mixed. {fitment}

Highest quality reproduction on the market! This complete rear window molding set is designed to replace all 5 exterior back glass moldings on 1967-69 coupe models. Each molding is manufactured to exact factory specifications and includes the upper back glass molding, RH and LH side moldings, and the RH and LH lower moldings. Reproduced in original quality stainless steel offering an original appearance and factory fit. Refer to part number C78 for rear window molding clip set. {fitment} 

Reproduction convertible weatherstripping to replace the original cracked, deteriorated or worn out original weatherstrip. Each set includes 5 seperate weatherstrips needed to replace the front windshield header seal, and the seals along the roof line on each side of the vehicle. The front header portion of this weatherstrip set is vulcanized together to form a one-piece seal, exactly as it was originally produced by GM The proper factory design of this set returns your convertible top seal back to factory original specifications. The one-piece vulcanized construction of the header bow seal duplicates the original in appearance, fit, and functionality, greatly enhancing the level of protection against wind draft and water leaks. {specs} {fitment}

Quality reproduction of the original dash knob set designed for use on 1968-69 Charger models. Replace damaged or missing dash knobs with these quality reproductions. Each knob is manufactured in injection molded ABS and...

Reproduction of the original front bumper bracket set used to mount the rear bumper on 1969 Firebird models. Each bracket is manufactured in stamped steel to OEM specifications replicating the original configuration and...

Reproduction of the original windshield molding set designed for 1964-68 Mustang coupe and Fastback models, and 1967-68 Cougar coupe models. This reproduction is manufactured in stainless steel as original. This 5-piece...

OER reproduction of the "DODGE" letters that mount to the hood of a 1967 Dodge Charger and Coronet models. Each reproduction DODGE letter is manufactured in quality die-cast zinc replicating the original emblem exactly....

OER reproduction of the original "D-O-D-G-E" letters that mount to the grill of a 1968 Dodge Coronet. Each letter is manufactured in die-cast zinc material replicating the original in qwuality, design, and appearance. Each...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the metal frame or channel, and trim with a knife or razor blade. Sold in 5 foot sections/roll, thickness of tape 1/32" (0.79 mm), Width 1-1/2" (38.1 mm).

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the metal frame or channel, and trim with a knife or razor blade. Sold in 5 foot sections/roll, thickness of tape 3/64" (1.19 mm), Width 1-1/2" (38.1 mm).

Our unique OER® Authorized wash bucket provides a convenient way to store or transport all of your car cleaning supplies while doubling as an extremely effective finish protecting wash tool. The Grit Guard insert sits in the bottom of the pail to extract particles and contaminants from mitts and brushes. Gravity causes sand and dirt to settle below the guard so the wash water stays scratch-free clean. Includes: 5 Gallon Pail with Handle Grit Guard Insert for Scratch-Free Cleaning The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.

OER® Authorized RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive, corrosion barrier coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel. RustSeal is an incredible, single-component, ready-to-use, high solids content, rust preventive coating with exceptional sealing properties. Using premium quality materials and advanced color formulations, this high tech performance coating is the present-day answer for 21st century rust protection. RustSeal is the most permanent cost-effective solution for stopping rust and corrosion anyplace where it is a problem: home, automotive, industry, fleet, farm and more! RustSeal® is an enhancement that lasts. Water and air are locked out, therefore oxidation, the precursor to rust, cannot take hold. It?s technology that?s unbeatable! Satisfaction guaranteed! RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal?s guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potential visible surface chips. RustSeal Coverage: 8oz of RustSeal will cover 12.5 sq. ft. with 2 coats A Pint of RustSeal will cover 25 sq. ft. with 2 coats A Quart of RustSeal will cover 50 sq. ft. with 2 coats A Gallon of RustSeal will cover 200 sq. ft. with 2 coats A 5 Gallon Pail of RustSeal will cover 1000 sq. ft. with 2 coats RustSeal Applications: Automotive: Chassis Floor pans Wheel wells fenders Trunks Engines Suspension parts Axles Roof drains Springs Doors Almost every part on a car except the exhaust! Marine: Engine rooms Hulls Masts Bilges Heat exchangers Decks Chain lockers Pumps Fuel tanks Boat trailers and more! Industrial: Heavy transport Steam pipes Sealing concrete Air conditioning repair Fiberglass repair Rebar coating Steel roof Fuel and waste-water treatment tanks and more! Other Uses: Hand rails Support beams Lawn equipment Garage floors Pipe work Appliances Lead-based paint encapsulation and more! Features and Benefits: High surface tolerance for many different types of applications Apply directly over treated rust High solids, single component formula Widest array of non-porous color formulas Combines with atmospheric moisture to cure Excellent surface penetration and adhesion Forms permanent non-porous barrier against moisture and oxygen Waterproof coating strengthened by repeated exposure to moisture Mold and mildew resistant High abrasion and chemical resistance Repels fuels, oils, most acids & alkalis, and graffiti Will not crack, flake or peel Withstands temps up to 600°F (316°C) Brush, roll or spray application Superior flow and leveling Flexible coating allowing expansion and contraction Compatible with all paint systems VOC compliant Lead-Free The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.

OER® Authorized RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive, corrosion barrier coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel. RustSeal is an incredible, single-component, ready-to-use, high solids content, rust preventive coating with exceptional sealing properties. Using premium quality materials and advanced color formulations, this high tech performance coating is the present-day answer for 21st century rust protection. RustSeal is the most permanent cost-effective solution for stopping rust and corrosion anyplace where it is a problem: home, automotive, industry, fleet, farm and more! RustSeal® is an enhancement that lasts. Water and air are locked out, therefore oxidation, the precursor to rust, cannot take hold. It?s technology that?s unbeatable! Satisfaction guaranteed! RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal?s guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potential visible surface chips. RustSeal Coverage: 8oz of RustSeal will cover 12.5 sq. ft. with 2 coats A Pint of RustSeal will cover 25 sq. ft. with 2 coats A Quart of RustSeal will cover 50 sq. ft. with 2 coats A Gallon of RustSeal will cover 200 sq. ft. with 2 coats A 5 Gallon Pail of RustSeal will cover 1000 sq. ft. with 2 coats RustSeal Applications: Automotive: Chassis Floor pans Wheel wells fenders Trunks Engines Suspension parts Axles Roof drains Springs Doors Almost every part on a car except the exhaust! Marine: Engine rooms Hulls Masts Bilges Heat exchangers Decks Chain lockers Pumps Fuel tanks Boat trailers and more! Industrial: Heavy transport Steam pipes Sealing concrete Air conditioning repair Fiberglass repair Rebar coating Steel roof Fuel and waste-water treatment tanks and more! Other Uses: Hand rails Support beams Lawn equipment Garage floors Pipe work Appliances Lead-based paint encapsulation and more! Features and Benefits: High surface tolerance for many different types of applications Apply directly over treated rust High solids, single component formula Widest array of non-porous color formulas Combines with atmospheric moisture to cure Excellent surface penetration and adhesion Forms permanent non-porous barrier against moisture and oxygen Waterproof coating strengthened by repeated exposure to moisture Mold and mildew resistant High abrasion and chemical resistance Repels fuels, oils, most acids & alkalis, and graffiti Will not crack, flake or peel Withstands temps up to 600°F (316°C) Brush, roll or spray application Superior flow and leveling Flexible coating allowing expansion and contraction Compatible with all paint systems VOC compliant Lead-Free The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.

Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...

Similar to the reproduction style chrome lug nut, this replacement style nut is cosmetically similar looking but more economical. It features a more rounded edge on the cap, and is 1 - 3/8" tall. Includes a 5 piece set for one wheel. 4 sets required per vehicle. Measures 1/2" x 20 lug nut 1-3/8" tall. Includes 5 lug nuts. 4 sets required per vehicle. Applications 1965-1973 Ford Mustang

Reproduction of the original 5 spoke wheel hub cap designed for the 15" x 7" Z/28 5 spoke mag wheel. Manufactured to factory specifications, each hub cap will fit and install as original. Includes correct Z/28 logo on cap. This popular cap was originally installed on 1979 through 1981 Z-28 models. Sold individually. Use as required. Officially Licensed by General Motors. {fitment} Officially Licensed by General Motors  

Correct reproduction of the original front bumper bracket set designed for use on all 1963 Impala, Bel Air and Biscayne models. Each bracket set includes all 5 necessary brackets to install the original or reproduction front bumper. Each bracket is manufactured in steel and includes correct mounting holes and design. Replace your original bent brackets with these superb reproductions. {fitment}

Authentic reproduction of the original grill bracketry designed for use on 1962 Chevy II and Nova models. Each grill bracket replicates the original in quality and design. Set includes 5 OEM style brackets to replace the originals for any 1962 Chevy II / Nova model. Each bracket is manufactured from stamped steel and EDP coated black for rust prevention. Includes 2 rubber seals. {fitment}

Used to secure the headliner to the inner roof, these bows feature all correct contours and bends as original. Color coded for easy identification of front to rear bow placement. Installation instructions are included.

Original console parts can be difficult to find and very expensive or impossible to repair. With our diecast reproduction restoration parts, you can bring your center console back to life with ease. These diecast pieces are...

Reproduction glass set for 1968-69 Camaro and Firebird models. Manufactured as an economical way to replace broken, scratched, or delaminating or cloudy original glass on your GM F-Body project car. Features the correct...

Reproduction glass set for 1968-69 Camaro and Firebird models. Manufactured as an economical way to replace broken, scratched, or delaminating or cloudy original glass on your GM F-Body project car. Features the correct...

OER reproduction of the original "DODGE" emblem letters that mount to the trunk lid for 1967 Dodge Coronet (Except 440 models), and all 1969 Coronet models. Each letter is manufactured in quality die-cast zinc, chrome...

This 3/8"-16 x 1" hex head bolt is a Grade 5, zinc plated steel fastener that is sold as each. Product Specifications Screw size: 3/8"-16 Length: 1" Thread length: Full Head style: Hex Grade: 5 Finish: Zinc Chromate

OER® Authorized RustSeal is a superior one part, ready-to-use, high-solids content, rust preventive, corrosion barrier coating, that is actually hardened by exposure to moisture. It is impervious to road salts and most every chemical. RustSeal flows out to a beautiful, rock-hard, tough ceramic-like coating that is tough to chip or scratch, and will not crack or peel. RustSeal is an incredible, single-component, ready-to-use, high solids content, rust preventive coating with exceptional sealing properties. Using premium quality materials and advanced color formulations, this high tech performance coating is the present-day answer for 21st century rust protection. RustSeal is the most permanent cost-effective solution for stopping rust and corrosion anyplace where it is a problem: home, automotive, industry, fleet, farm and more! RustSeal® is an enhancement that lasts. Water and air are locked out, therefore oxidation, the precursor to rust, cannot take hold. It?s technology that?s unbeatable! Satisfaction guaranteed! RustSeal is not intended for use as a final finish. Repeated or prolonged exposure to direct UV light will cause cosmetic alteration to its color and sheen. RustSeal?s guaranteed rust protective properties, however, will not degrade. In areas not exposed to direct UV light, like the underside of a car, RustSeal will seal as well as serve as a great looking final finish. To protect against unwanted cosmetic changes, topcoat RustSeal with any opaque (solid color) paint system. Please note that a clear topcoat cannot provide the needed UV protection. Choose the closest color associated RustSeal primer to compliment your topcoat and protect against potential visible surface chips. RustSeal Coverage: 8oz of RustSeal will cover 12.5 sq. ft. with 2 coats A Pint of RustSeal will cover 25 sq. ft. with 2 coats A Quart of RustSeal will cover 50 sq. ft. with 2 coats A Gallon of RustSeal will cover 200 sq. ft. with 2 coats A 5 Gallon Pail of RustSeal will cover 1000 sq. ft. with 2 coats RustSeal Applications: Automotive: Chassis Floor pans Wheel wells fenders Trunks Engines Suspension parts Axles Roof drains Springs Doors Almost every part on a car except the exhaust! Marine: Engine rooms Hulls Masts Bilges Heat exchangers Decks Chain lockers Pumps Fuel tanks Boat trailers and more! Industrial: Heavy transport Steam pipes Sealing concrete Air conditioning repair Fiberglass repair Rebar coating Steel roof Fuel and waste-water treatment tanks and more! Other Uses: Hand rails Support beams Lawn equipment Garage floors Pipe work Appliances Lead-based paint encapsulation and more! Features and Benefits: High surface tolerance for many different types of applications Apply directly over treated rust High solids, single component formula Widest array of non-porous color formulas Combines with atmospheric moisture to cure Excellent surface penetration and adhesion Forms permanent non-porous barrier against moisture and oxygen Waterproof coating strengthened by repeated exposure to moisture Mold and mildew resistant High abrasion and chemical resistance Repels fuels, oils, most acids & alkalis, and graffiti Will not crack, flake or peel Withstands temps up to 600°F (316°C) Brush, roll or spray application Superior flow and leveling Flexible coating allowing expansion and contraction Compatible with all paint systems VOC compliant Lead-Free The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.