1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1971-1972 Chevrolet Nova, Pontiac Ventura models without EEC (evaporative emissions control vapor recovery system). This reproduction fuel tank is manufactured...
1967-72 Camaro, Nova, Firebird; Fuel Tank Sending Unit; 3/8"; with 1/4" Vent
Reproduction of the original fuel tank sending unit designed for use with 1967-68 Chevrolet Camaro and Firebird models with 3/8" line and 1/4" vent. After years of use, your fuel sending unit can stop working properly. When...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1971-72 Nova, Ventura; Fuel Tank; with EEC; Zinc Coated; 18 Gallon Tank
Reproduction of the original fuel tank designed for use with 1971-72 Chevrolet Nova, Pontiac Ventura models with Evaporative Emission Control (EEC). Each fuel tank is manufactured in quality stamped steel and features a zinc...
1975-79 Nova, Apollo, Ventura, Omega; Fuel Tank; Zinc Coated; 21 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1975-79 Chevrolet Nova and GM X-body models as listed below. This reproduction fuel tank is manufactured in zinc coated steel and includes the fuel sender...
1971-72 Nova, Ventura; Zinc Coated Fuel Tank; without EEC; 18 Gallon; GM46B
Reproduction of the original fuel tank designed for use with 1971-72 Nova, and Ventura models without Evaporative Emission Control (EEC). Each fuel tank is manufactured in quality stamped steel and features a zinc coating for...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1959-66 Pontiac; Tri-Power Throttle Body; For 389/421 Engine
Reproduction Tri-Power throttle body assembly for 1959-66 Pontiac models with a 389 or 421 engine. This throttle body is manufactured out of Die Cast and features the carburetor shaft as well as the butterflies. The front and...
Reproduction of the original style fuel tank mounting straps designed for use with 1976-81 Camaro, Firebird, and 1976-79 Nova, and X-body GM models. Each strap is manufactured in quality stainless steel to original factory...
1968-72 Chevy II Nova, Ventura; ; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1968-72 Chevrolet Chevy II, Nova, and Pontiac Ventura models. Replace your original worn out gas tank straps with high quality reproductions....
1976-81 Camaro, Firebird; 1976-79 Nova; Fuel Tank Mounting Straps; Pair
Reproduction fuel tank mounting straps produced using heavy duty zinc-plated pre-formed steel for an original appearance. If you are replacing your gas tank or restoring your classic, you may want to replace your old gas tank...
Reproduction of the original fuel tank mounting straps designed for use with 1974-75 Camaro, Firebird, and 1973-75 Nova and GM X-Body models. Each strap is produced using heavy duty pre-formed steel for an original...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1967-72 Camaro, Firbeird, Nova; Fuel Tank Strap Mounting Bolt Kit ; 10 Piece Set ; Various Models
Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...
1967-69 Camaro, Firebird,1968-72 Nova; Fuel Tank Sending Unit; with 3/8" Single Line
Reproduction fuel tank sending unit for 1967-69 Camaro and Firebird models, and 1968-72 Nova models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
1971-1972 Chevrolet Nova;, Pontiac Ventura; Gas Tank; with EEC; Stainless Steel; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1971-1972 Chevrolet Nova, Pontiac Ventura models with EEC (evaporative emissions control vapor recovery system). This reproduction fuel tank is manufactured in...
1971-72 Chevrolet Nova/Pontiac Ventura; Without EEC; Fuel Tank; 18 Gallon; Niterne Steel; GM46B
Reproduction fuel tank for 1971-72 Nova models with out E.E.C. (evaporative emissions controls). This fuel tank has a capacity of 18 gallons. Note: Use gas cap Part Number ST10807. Note: Shipped double oversize. Chevrolet...
1973-1974 Apollo, Nova, Omega, Ventura; Ni-Terne Coated Fuel Tank; 21 Gallon Capacity
Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1973-74 Buick Apollo, Chevrolet Nova, Oldsmobile, Omega, Pontiac Ventura models. This OE-quality Ni-Terne coated reproduction stamped steel...
1973-74 Nova, Ventura, Omega, Apollo; Zinc Coated Fuel Tank; 21 Gallon
Reproduction of the original fuel tank designed for use with 1973-74 Chevrolet Nova, 1973-74 Pontiac Ventura, Olds Omega, and Buick Apollo models with Evaporative Emission Control (EEC). Each fuel tank is manufactured in...
1976-81 Camaro, Firebird, 1973-79 Nova, X-Body; Fuel Tank Sending Unit; with Return Line; 3/8" Line
Reproduction fuel tank sending unit for a variety of GM models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send...
Reproduction of the complete accelerator pedal assembly which extends from the firewall on all V8-equipped 1967 Firebird models. This accelerator pedal assembly comes complete with the pedal, pedal mount pin and spring,...
1973-75 Apollo, Nova, Omega, Ventura; Fuel Tank Sending Unit; 3/8" Single Fuel Line
Reproduction of the original fuel tank sending unit designed for use with 1973-75 Chevrolet Nova and GM X-body models with single 3/8 fuel line. After years of use, your fuel sending unit can wear out or stop working. When...
1976-81 Buick, Chevy, Olds, Pontiac; Fuel Tank Sending Unit; 3/8" Single Line
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1968-69 Camaro, Firebird; 1968-72 Nova; Fuel Tank Sending Unit; Single Line; 5/16"
Reproduction of the original fuel tank sending unit designed for use with 1968-69 Camaro and Firebird models, and 1968-72 Nova models with 5/16" line. After years of use, your fuel sending unit can wear out or stop working....
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1968-72 Chevy II, Nova, Ventura; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original gas tank straps designed for use with 1968-72 Chevy II, Nova, and Pontiac Ventura Nova models. Each strap is manufactured in quality stainless steel for long lasting dependability. Replace the...
1973-75 Nova; 1974-75 Camaro / Firebird Stainless Steel Fuel Tank Mounting Straps; Pair
Reproduction of the original style fuel tank straps manufactured in stainless steel for 1973-75 Nova, Apollo, Omega, Ventura, and 1974-75 Camaro, Firebird models. When replacing your fuel tank don't use ordinary steel straps,...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1975-79 Nova, Apollo, Skylark, Omega, Ventura, Phoenix; Fuel Filler Tank Neck
Reproduction fuel tank filler neck for 1975-1979 Chevy Nova, Pontiac Ventura / Phoenix, Olds Omega, and Buick Apollo models. Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1962-81 GM; Fuel Tank Sending Unit Lock Ring; Small; 1-15/16"; Various Models
Correct reproduction fuel tank sending unit locking ring which secures the fuel tank sending unit to the gas tank. Replaces the original ring which are commonly destroyed when being removed. This ring helps to seal the...
This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...
1969-81 Fuel and Brake Line Clip ; Dual Line 3/8" and 1/4"
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1974-81 Camaro, Firebird , Nova; Fuel Tank Strap Hardware Set
Reproduction fuel tank mounting strap hardware for various GM vehicles including 1976-81 Camaro and Firebird models. This hardware set is recommended when replacing fuel tank straps. Set of 4 bolts. Buick Applications:...
1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...
1968-74 Firebird, Trans Am; Aluminum Rear Carburetor Fitting; with Angled Fitting
Reproduction of the original carburetor rear fitting designed specifically for use with 1968-74 Pontiac Firebird and Trans Am models with 326, 350, 400, and 455 motors with or without Ram Air. This fitting screws to the back...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
1968-74 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Pad to Rod Support
Reproduction of the original style GM accelerator pedal rod support for use on the various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each support is manufactured in injection molded ABS offering an exact...
Fuel and Brake Line Clip Set ; Dual Line 3/8" and 1/4" ; 7 Piece Set
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1968-79 Accelerator Control Cable Retainer ; Various Models
OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...