Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4
Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...
1965-86 GM; Interior Door Panel Clip; White Nylon; Each
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models
Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...
1964-73 GM; Sun Visor Support Bracket; Coupe; with Hardware; Die-Cast; Each
High quality reproduction of the original interior sun visor support bracket designed for use with various 1964-73 Buick, Chevrolet, GMC, Pontiac and Oldsmobile models. Each sun visor bracket is manufactured in quaility...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 GM; Arm Rest Base; Standard Interior; Black; Passenger Side; OER; Various Models
OER® reproduction 12" arm rest base for various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the original in fit and...
1962-79 GM; Door Panel & Sail Panel Installation Clip; Each; Varius Models
Reproduction of the original style door panel installation clips used to install 1967-79 front door panels or for coupe rear quarter sail panels on various GM models. Clips can be used for standard and deluxe interiors. See...
Correct reproduction of the original outer headliner bow clips designed for use on various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each clip is manufactured in injection molded ABS replicating the original...
1962-81 GM Door Panel Clip Retainer Set ; 12 Piece Set
OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...
Reproduction front arm rest base set for various GM models including 1962-64 Chevy II, Nova, 1962-67 Bel Air, and 1964-67 Chevelle, GTO, and LeMans models among many others. Each arm rest base in manufactured in quality...
1967-1991 GM; Rear Coat Hooks; Louvered Style; Black; with Screws; Pair
Reproduction of the original style coat hanger hooks designed for use on a variety of 1967-91 General Motors vehicles. Manufactured in quality injection-molded ABS to original factory specifications. These coat hooks feature...
This interior seat foam is a critical part of upholstery restoration that is often overlooked. Replacing your seat foam not only offers you a more comfortable place to sit, but also generally makes for a better fit and...
Correct reproduction injection molded rear armrest bases for various GM models. Each armrest base is manufactured using injection-molded ABS to correct factory dimensions. Features a correct high gloss chrome finish same as...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1960-1966 GM; Bucket Seat Foam; Various Models; Made in the USA
OER® reproduction of the original seat foam designed for use with various GM models. Replacing the seat foam before installing new upholstery is a must for any restoration. This reproduction is manufactured using...
Seat Foam Sheet; Non-Molded; Universal Fit; 36" x 68" X 1-1/2"
This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...
Reproduction rear arm rest assemblies for a variety of GM models. Includes correct ABS plastic base with molded urethane pad, and chrome ashtray with ribbed design lid. Correct for 1969 models that were equipped with armrests...
Reproduction rear armrest assemblies for a variety of GM models. Includes correct ABS plastic base with molding, molded urethane pad, and chrome ashtray with ribbed lid. Correct for 1968-69 models that were equipped with...
1964-92 Pontiac; Floor Mat Set; Front and Rear; Black; 4 Piece Set
Protect your interior carpet and give your Pontiac vehicle a unique look by adding these custom style floor mats for front and rear. Floor mats are designed for use with virtually all 1964-92 Pontiac Firebird models. Each mat...
1964-92 Pontiac Carpet Floor Mat Set; Blue / Black; 4 Piece Set
Protect your interior carpet and give your Pontiac vehicle a unique look by adding these custom style floor mats for front and rear! Floor mats are designed for use with virtually all 1964-92 Pontiac Firebird models. Each mat...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans, Tempest Convertible Models; Armrest Lower Panel; RH
Zinc plated reproduction of the original steel rear arm rest panel for 1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans and 1968-70 Tempest convertible models. This is the panel in the rear quarter that the armrest attaches...
1962-64 Chevrolet Chevy II/Nova, 8" Arm Rest Pad; Rear; Black
Reproduction of the original 8" arm rest pad for 1962-64 Chevy II Nova models. Each pad is manufactured in quality automotive grade self-skin urethane featuring the correct grained pattern. Will fit and install on original GM...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
Reproduction convertible top receptacle and sinvisor support for 1964-65 GM convertible models which include Chevelle, GTO, Cutlass and skylark. These reproduction sunvisor support have the correct finish and excellent...
OER® reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile, and Pontiac models from 1968-72. Each arm rest pad is manufactured in quality automotive-grade self-skin urethane featuring the correct Madrid...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
72" x 36" Jute Padding Insulation; 40 oz.
Jute padding will insulate your interior from noise while helping to maintain an even temperature. For firewalls, floor pans, trunks, doors, and roof panels or other areas of the vehicle. These jute pads measure 72" x 36" and...
1962-64 Chevrolet Chevy II/Nova, 8" Arm Rest Pad; Rear; Red
Reproduction of the original 8" arm rest pad for 1962-64 Chevy II Nova models. Each pad is manufactured in quality automotive grade self-skin urethane featuring the correct grained pattern. Will fit and install on original GM...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1962-64 Chevrolet Chevy II/Nova, 8" Arm Rest Pad; Rear; Aqua
Reproduction of the original 8" arm rest pad for 1962-64 Chevy II Nova models. Each pad is manufactured in quality automotive grade self-skin urethane featuring the correct grained pattern. Will fit and install on original GM...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction of the original 12" arm rest base for use on various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the...
OER® reproduction of the original 12" arm rest base for use on various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the...
1968-1972 Buick, Pontiac, Olds; Front Arm Rest Pad; 12"; Teal Blue; RH; Urethane Reproduction
OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 Arm Rest Base; Standard Interior; Pearl Parchment; Drivers Side; OER; Various Models
OER® reproduction of the original 12" arm rest base for use on various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the...
Reproduction Strato seat headrest guides for 1966-72 GM A-Body, 1966-69 GM B-Body, and 1968-71 GM X-Body models. Manufactured to factory specifications, these guides replicate the original design for proper fit, function, and...
12 Piece Plastic Firewall Insulation Retainer Set
Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. Quantities vary by model, use as needed. The OER® Authorized logo...
1955-81 GM; Firewall Pad Fastener Set; 4 Piece Set
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
Nylon Door Panel Clip Set; Set of 12 Clips
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
7 Piece Plastic Firewall Insulation Retainer
Set of 7, nylon firewall insulation retainer clips for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Made of durable black nylon plastic. The OER® Authorized...
Nylon Door Panel Clip Set; 8 Piece
These clips are designed to attach to the lower door panel. Once installed, the panel is pushed directly into the door frame.The nylon clips will keep the door panel positioned properly after installed. Applications:...
Plastic firewall insulation retainer clip for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Sold individually. Use as required. The OER® Authorized logo...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1960-78 Upholstery Installation and Padding Kit For Front Bench Seat
Reupholstery padding kit for front bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 1 30" x 70" x 1-1/2" thick foam 1 10 lb roll of cotton 4 yards of burlap 4 yards...
1966-71 Buick, Chevy, Pontiac, Oldsmobile A-Body; Front Bucket Seat Foam; Each; Various Models
OER® reproduction of the original front bucket seat foam designed for use with various 1966-71 GM applications. Replacing the seat foam before installing new upholstery is a must. This outstanding reproduction is...
Reproduction stamped steel headliner support strip set with bows for 1968-72 Pontiac Tempest, Lemans, GTO 2 door hardtop models. Each 14-piece set is comprised of 9 stamped steel strips and 5 steel headliner support bows....
1962-63 Impala SS, 1964 GTO; Front Bucket Seat Foam; Each; Made in the USA!
Reproduction of the original front bucket seat foam for use with 1962-64 Impala SS and 1964 GTO models. When replacing the interior upholstery, replacing the front and rear seat foam is always recommended. This quality front...
1964-92 Pontiac; Floor Mat Set; Front and Rear; Red; 4 Piece Set
Protect your interior carpet and give your Pontiac vehicle a unique look by adding these custom style floor mats for front and rear. Floor mats are designed for use with virtually all 1964-92 Pontiac Firebird models. Each mat...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
1966-72 GM Vehicles; Upholstery Installation and Padding Kit; Front Bucket Seats
Reupholstery padding kit for 1966-72 various GM models with front bucket seats. Each set comes with material to insulate and pad the seat frames prior to installing new upholstery. Highly recommended whenever adding new...
Front Bucket Seats; Upholstery Installation and Padding Kit
Reupholstery padding kit for front bucket seats. Comes with material to insulate and pad seat frames prior to installing new upholstery. Include enough material to reupholster both front bucket seats on a wide variety of...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1964-67 Chevelle, Skylark, Cutlass, GTO, LeMans, Tempest Convertible Models; Armrest Lower Panel; LH
Zinc plated reproduction of the original steel rear arm rest panel for 1964-67 Chevelle, Skylark, Cutlass, GTO, LeMans and 1968-70 Tempest convertible models. This is the panel in the rear quarter that the armrest attaches...
1964-67 Chevelle, Skylark, Cutlass, GTO, LeMans, Tempest Convertible Models; Armrest Lower Panel; RH
Zinc plated reproduction of the original steel rear arm rest panel for 1964-67 Chevelle, Skylark, Cutlass, GTO, LeMans and Tempest convertible models. This is the panel in the rear quarter that the armrest attaches to. RH...
1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans, Tempest Convertible Models; Armrest Lower Panel; LH
Zinc plated reproduction of the original steel rear arm rest panel for 1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans and 1968-70 Tempest convertible models. This is the panel in the rear quarter that the armrest attaches...