Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1965-66 Pontiac Lemans; Rear Quarter Panel Letter Set; For LH or RH Side
Reproduction LEMANS nameplate letter emblems for the rear quarter panel on 1965-66 models. These letters fit on left or right side on the rear portion of the rear quarter panel spelling out the model name LEMANS. Die-cast...
1966-69 Pontiac Lemans, Tempest, GTO; PONTIAC Nameplate Trunk Letter Set; Die-Cast Emblem
Reproduction rear panel "PONTIAC" nameplate emblem letter set for various 1966-69 Pontiac A-Body models. Each emblem letter is designed and manufactured to replicate the original for an authentic appearance and fit. Chrome...
1964-65 Pontiac Lemans, GTO; Trunk Lid Emblem; Arrow Head Logo
Reproduction "Arrow Head" emblem with black backfilled enamel accent for the top of the trunk lid on 1964-65 Pontiac Lemans, and GTO models. Each die-cast emblem is designed and manufactured to replicate the original for an...
1970-71 Pontiac GTO, LeMans, Tempest; Trunk Emblem; GT-37
1970-1971 Pontiac GTO, LeMans, Tempest rear decklid emblem "GT-37". Replaces General Motors part number 9870519.
This is a reproduction of the radiator tag code PD (IH, CB, 47) for 1970 Pontiac GTO, LeMans and Tempest. These are factory style metal tags that GM put on all radiators. It gives you the codes that GM put on their radiators...
1969-72 Pontiac; Horn Button Emblem; For Formula Steering Wheel Cap; Silver Arrowhead
Reproduction steering wheel emblem for 1969-72 Pontiac Formula steering wheel horn cap. Replace the missing emblem on your Pontiac with this quality reproduction or use this Pontiac Arrowhead horn cap emblem on a Firebird...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-1974 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Blue; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1967-74 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1967-77 Pontiac Firebird, Trans Am; "400" Checkered Flag Front Fender Emblems; Pair
Checkered flag front fender emblems with 400 engine size designation can be used with various Pontiac models including 1967-77 Firebird and Trans Am models. These emblems are manufactured in die-cast zinc and feature the...
1967-69 Pontiac Lemans; Quarter Panel or Front Fender Emblem; LeMans Letter Set; 6-Pieces; LH or RH
Reproduction LeMans nameplate letter set for quarter panel on 1967-68 models, and front fender on 1969 models. This emblem letter set fits on left or right side on various models. Die-cast zinc letter are chrome plated and...
1969 Pontiac GTO, LeMans, Tempest; Fender Emblem; "Custom-S"
Reproduction fender name plate "Custom-S" for 1969 Pontiac GTO, LeMans and Tempest is a perfect fit and finish of the original. Baked on enamel off white paint with a bright red "S" in perfect detail. Sold individually.
1971-72 Pontiac Lemans; "Sport" Quarter Panel & Front Fender Emblem; Each
Reproduction "Sport" nameplate quarter panel and fender emblem script. This emblem fits on left or right side on the rear quarter panel on 1971 models, and the front fender on 1972 models. Zinc die-cast emblem features brush...
1967-1969 Pontiac GTO, LeMans, Tempest; Fender Emblem
1967-1969 Pontiac GTO, LeMans, Tempest fender emblem "CUSTOM". Replaces GM part# 4440993.
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
1978-90 Door Sill Plate Emblem; Body By Fisher; Each
Correct reproduction "B ody by Fisher" door opening sill plate emblem for various 1978-90 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each emblem is correctly stamped in aluminum material to exact specifications...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
1964-67 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Aqua; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1964-67 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...