1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
1970-72 Buick Skylark, GS 455, GS; Chassis & Suspension; Hardware Bolt Kit; OEM
This is a 129 piece kit it includes all the bolts needed to attach your suspension & steering to the frame for 1970-72 Buick Skylark, GS and GS 455 models. Includes brake line and fuel line "clamp bolts" as well as...
1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"
Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....
This reproduction disc brake spindle set is designed for a wide range of GM muscle car models, including 1967-1969 Camaro and Firebird, 1968-1974 Nova and other X body vehicles, as well as 1964-1972 Chevelle and additional A...
1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6
Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1968-72 Chevelle, Skylark, Cutlass, GTO; Control Arm; Rear Upper W/Polyurethane Bushings
Reproduction of the original rear upper control arm for use with various 1964-67 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design,...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Reproduction rear upper trailing arms for 1964-67 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1964-67 Chevelle, GTO, Cutlass; Rear Control Arm; Traction Control;; Pair
Reproduction of the factory installed reinforcement traction bars rear control arm tie bars. These were installed at the factory on all 4 speed manual transmission applications. They will also work for automatic transmission...
Reproduction rear upper trailing arms for 1968-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1964-72 Various GM Vehicles Chevelle, GTO, Cutlass; Shim/Bolt Kit; Rear Sway/Stabilizer Bar
New OEM rear sway bar for 1964-72 GM applications. Reproduction rear stabilizer/sway bar bolt and shim kit for various 1964-72 GM vehicles Which includes GTO, Cutlass, Skylark and Chevelle. See vehicle fitment for all...
Reproduction front sway bar bushing and mounting bracket set for 1964-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a 1-1/4" sway bar. Manufactured to factory specifications, this set includes two...
1964-66 Various GM Applications Including GTO, Chevelle, Skylark; Rear Coil Spring; Hold Down Clamps
This is the rear coil spring hold down clamp for rear end. New reproduction this factory mounting clamp that holds the rear coil spring to the rear end. Without these clamps, your spring will make a "clunking" noise when...
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1958-88 Various GM Vehicles Chevelle, Skylark, Cutlass, GTO; Front Sway Bar; Heavy Duty Bracket; WS6
New reproduction of the OEM 1964-88 GM heavy duty front sway bar bracket for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models. See vehicle fitment fort all...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1964-72 Chevelle, GTO, Cutlass; Rear Lower Control Arm; W/Polyurethane Bushings; Pair
Reproduction rear lower control arm for various 1964-72 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and fitment. Replace a...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction boxed rear lower control arm for various 1964-72 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and fitment....
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; LH Driver Side
Reproduction lower control arm for use on a variety of 1964-72 GM A-Body models. Each control arm is manufactured in stamped steel to OE specifications for a precise fit and reliable performance. This complete assembly...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side
Reproduction lower control arm for use on various 1964-72 GM A-Body models. Manufactured in stamped steel to OE factory specifications for a precise fit and reliable performance. Each assembly includes pre-installed round...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
F41 original-style rear sway bar for 1964-72 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, Oldsmobile 442, Cutlass, and 1970-72 Chevrolet Monte Carlo models. Manufactured to factory...
1964-72 GM A-Body; Rear Control/Trailing Arms; Lower; With Original Style Rubber Bushings; LH and RH
Reproduction rear lower trailing arms for 1964-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1964-72 El Camino, GTO, Skylark; Rear Sway Bar, Stabilizer Bar; 1" Diameter
Performance rear sway bar or stabilizer bar for various 1964-72 GM models including El Camino, GTO, Skylark, 442 models. Features a plated finish for corrosion resistance. Replace the original sway bar with this larger...
New gold cadmium coated rear sway bar for 1964-72 GM applications. Reproduction rear stabilizer/sway bar for various 1964-72 GM vehicles Which includes GTO, Cutlass, Skylark and Chevelle. This stabilizer bar is 7/8" inches in...
Reproduction rear upper control arm for various 1964-67 GM A-body models including Chevelle, GTO, Cutlass and El Camino. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and...
Reproduction rear crossmember to frame reinforcement braces for 1968-72 Chevelle, El Camino, GTO, Tempest, LeMans, Skylark, 442, and Cutlass models, as well as 1970-72 Monte Carlo and 1971-72 GMC Sprint. Manufactured from...
1968-72 Various GM Vehicles; Rear Control Arm; Traction Control; Tie Bar; Pair
Reproduction of the factory installed reinforcement traction bars rear control arm tie bars. These were installed at the factory on all 4 speed manual transmission applications. They will also work for automatic transmission...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Rear axle lower control arm bushing for 1964-72 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, Oldsmobile 442, Cutlass, and 1970-72 Chevrolet Monte Carlo models. Manufactured to factory...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 1-1/8" diameter...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4" to 4" inclusive. These heat treated washers are for general purpose and structural use. For use...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; RH Passenger Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; LH Driver Side
Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...
1964-75 Camaro, Chevelle, Firebird, GTO; Upper A-Arm Bolt and Nut Set; 8 Piece Set
Reproduction of the upper control arm cross shaft bolt set used to retain the shaft to the frame mounting ears on various GM vehicles. The grade 8 ratings nuts & bolts are made from high strength steel which as been formed...
1964-74 GM; 2" Drop Spindles; with Disc Brakes; RH & LH; Pair; Various Models
These reproduction 2 inch drop spindles are designed for various 1964-1972 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models and serve as a direct replacement for OE single piston disc brake spindles....
1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models
1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...
1964-72 Chevrolet, Pontiac; Lower Control Arm Bumper; Each; Various Models
Reproduction of the original lower control arm bumper designed for use on various GM vehicles including 1968-1969 Camaro and Firebird models. Each bumper is manufactured from durable hard rubber and features the correct...
1961-1994 GM, Ford; Upper Control Arm Bushing; Front or Rear; Various Applications
Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...
1971-2005 GM; Rear Lower Control Arm Bushing; Each; Various Models
Reproduction control arm bushing for the lower control arm on various 1971-2005 GM models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or going over...
1969-83 GM; Front Sway Bar Bushing; 1" Inner Diameter; Each
Reproduction front sway bar bushing for various GM models. This rubber bushing includes a 1" diameter hole and is installed on the the front sway bar on most models that included a heavy duty or hi-performance suspension....
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...