Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1970-72 Pontiac GTO, LeMans, Tempest, Buick Skylark, Oldsmobile Cutlass and 1970-71 442 models with a 4-speed Muncie manual transmission....
1967-68 Skylark, Cutlass, GTO, Grand Prix; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set
reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1967-68 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. These are 3/8? diameter...
1964-66 Pontiac GTO, LeMans, Tempest; Clutch Bell Crank; Cross Shaft
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1966-67 Various GM Vehicles Including Skylark, LeMans, GTO; Clutch Bell Crank; Cross Shaft; Z-Bar
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1968-72 Pontiac GTO, LeMans; Swivel Assembly; Clutch Cross Shaft; Z-Bar
New factory reproduction cross counter shaft swivel assembly. This swivel assembly fits Pontiac GTO and LeMans. It Mounts on the motor side of the cross shaft. Must order the cross shaft to make a complete assembly.
1968-72 Pontiac GTO, LeMans; Clutch Bell Crank; Cross Shaft; Z-Bar
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1964-66 Pontiac GTO, Oldsmobile Cutlass, Buick Skylark; Upper Clutch Rod
Reproduction of the correct clutch rod for 1964-66 Pontiac GTO, Oldsmobile 442 and Buick Skylark models. Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from...
1968-72 Various GM Vehicles Including Chevelle, LeMans, Cutlass; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
1969 GTO, Tempest, LeMans, Skylark, Cutlass; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set
Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1969 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. Shifter tabs are die stamped,...
A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...
Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions
Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...
1970-74 Camaro, Firebird; Muncie Reverse Lock Out Linkage Set; 4 Speed; Small, Big Block
Reproduction of the original style lock out linkage set for 1970-74 Camaro and Firebird models with Muncie 4-speed transmissions. Designed for use with small block or big block models. Includes fully assembled bellcrank,...
We now have a correct factory reverse lockout kit used on various GM models which include 1969-72 Pontiac GTO, Buick Skylark, Oldsmobile Cutlass models. Kit includes: Reverse tab - mounts on trans; rod that goes from the...
1968-72 Pontiac GTO; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
1967-72 Small Block Clutch Fork Return Spring
OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 3-5/8" O.L. 2-1/2" spring portion. Applacations: 1967-69 Camaro small block 1967-69 Firebird...
1967-75 Return Spring Extension Rod
Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1968-69 Camaro, Firebird, 1968-74 Chevy II, Nova; Clutch Linkage Kit; Big Block
Reproduction of the original components needed to replace the cluch linkage on 1968-69 Camaro big block models, 1968-74 Chevy II / Nova big block models and 1968-69 Firebird (V8) models. You'll be pleased with this all new...
Clutch Linkage Kit ; 1967 Camaro Big Block, 1967 Firebird V8
Reproduction of the original components needed to replace the clutch linkage on 1967 Camaro big block models, and 1967 Firebird V8 models. You'll be pleased with this all new pre-packaged clutch linkage set. Whether replacing...
1967 Camaro, Firebird Clutch Linkage Set ; Small Block; V8
Reproduction of the original components needed to replace the cluch linkage on 1967 Camaro small block and 1967 Firebird (L6) models. You'll be pleased with this all new pre-packaged clutch linkage set. Whether replacing worn...
1968-72 Frame Side Bellcrank Pivot Ball Bracket
OER® reproduction of the original frame side bellcrank pivot bacll beacket designed for use on various GM models. Each bracket is die-blanked and formed with the correct offset and holes for mounting. 1 bracket required...
1970-81 Clutch Bellcrank Pivot Ball Bracket ; Frame Side ; Camaro. Firebird
OER® reproduction of the original frame side clutch bellcrank pivot ball bracket designed for use on 1970-81 Camaro and Firebird models with manual transmissions. This steel bracket attaches to the vehicles frame....
1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel
OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...
1968-69 Camaro, 1968-74 Nova, 1968-69 Firebird; Clutch Linkage Set; Small Block, L6
Reproduction of the original components needed to replace the clutch linkage on 1968-69 Camaro small block models, 1968-74 Chevy II / Nova models and 1968-69 Firebird (L6) models. You'll be pleased with this all new...