This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
Reproduction Hurst Competition Plus shifter assembly to fit and look like what was originally used in the 1967-72 Pontiac GTO, LeMans and 1967-70 Tempest models with 4-speed manual transmission. It features a chrome round bar...
Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1970-72 Pontiac GTO, LeMans, Tempest, Buick Skylark, Oldsmobile Cutlass and 1970-71 442 models with a 4-speed Muncie manual transmission....
1967-68 Skylark, Cutlass, GTO, Grand Prix; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set
reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1967-68 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. These are 3/8? diameter...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick...
1970-81 Camaro, Firebird; Upper Floor Shift Boot, with Manual Trans
Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1964-66 Pontiac GTO, LeMans, Tempest; Clutch Bell Crank; Cross Shaft
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1966-67 Various GM Vehicles Including Skylark, LeMans, GTO; Clutch Bell Crank; Cross Shaft; Z-Bar
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1968-72 Pontiac GTO, LeMans; Swivel Assembly; Clutch Cross Shaft; Z-Bar
New factory reproduction cross counter shaft swivel assembly. This swivel assembly fits Pontiac GTO and LeMans. It Mounts on the motor side of the cross shaft. Must order the cross shaft to make a complete assembly.
1968-72 Pontiac GTO, LeMans; Clutch Bell Crank; Cross Shaft; Z-Bar
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1969-72 GTO, Cutlass, Skylark; Hurst Shifter; Mounting Bracket
Reproduction of the Hurst shifter mounting bracket for various GM applications including GTO, Skylark, Cutlass models. This is an identicalMade from stamped steel and has a gold zinc coating for corrosion resistance and...
1982-86 Camaro, 1991-99 Camaro, 1982-83 Firebird; Shift Knob Ball; with Manual Transmission; Black
Correct reproduction shift knob for 1982-86 Camaro, 1991-99 Camaro, and 1982-83 Firebird / Trans Am models. Each knob is manufactured to correct factory dimensions replicating the original shift knob in design, appearance,...
1964-66 Pontiac GTO, Oldsmobile Cutlass, Buick Skylark; Upper Clutch Rod
Reproduction of the correct clutch rod for 1964-66 Pontiac GTO, Oldsmobile 442 and Buick Skylark models. Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from...
Cast aluminum Hurst 4 speed shifter mounting plate/bracket for 1964-66 Pontiac GTO, LeMans, Tempest and 1964-66 Oldsmobile Cutlass models. This reproduction shifter bracket allows the factory Hurst 4-speed to a Muncie...
1967 F-Body Frame Side Clutch Pivot Ball Bracket
OER® Reproduction of the frame side clutch pivot ball bracket. Features the correct offset and holes as original and is used for L6, small block and big block models. Applications 1967 Camaro 1967 Firebird You are assured...
1968-72 Various GM Vehicles Including Chevelle, LeMans, Cutlass; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
1969 Pontiac 4-Speed Shift Knob Insert
Reproduction domed polyurethane shift knob insert for the 4-speed shift knob on all 1969 Pontiac models except for Grand Prix. Features the shift pattern in silver over a red and black bullseye design with bright chrome...
1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst
Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
1969 GTO, Tempest, LeMans, Skylark, Cutlass; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set
Reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1969 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. Shifter tabs are die stamped,...
A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...
Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions
Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...
1970-74 Camaro, Firebird; Muncie Reverse Lock Out Linkage Set; 4 Speed; Small, Big Block
Reproduction of the original style lock out linkage set for 1970-74 Camaro and Firebird models with Muncie 4-speed transmissions. Designed for use with small block or big block models. Includes fully assembled bellcrank,...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...
We now have a correct factory reverse lockout kit used on various GM models which include 1969-72 Pontiac GTO, Buick Skylark, Oldsmobile Cutlass models. Kit includes: Reverse tab - mounts on trans; rod that goes from the...
1970-81 Firebird, Trans Am; Shift Knob with Chrome; 4 Speed
Reproduction of the 4 speed shift knob originally installed on 1970-81 Pontiac Firebird models with 4/speed manual transmissions. Each shift knob features the correct grained grip, raised 4/speed pattern emblem, and installs...
1982-92 Camaro, Firebird; Lower Shift Boot; T-5; 5-Speed
Reproduction of the original lower shifter boot for use with 1982-1992 Camaro and Firebird models. Manufactured to factory specifications with pre-punched mounting holes. This is the lower boot that is bolted to the shift...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1969-1971 Pontiac Firebird; GTO, LeMans; Shift Knob; Walnut Wood; Shift Pattern
Reproduction walnut Hurst Muncie shift knob with shift pattern for 1969-71 Pontiac Firebird, GTO and LeMans. This knob has 3/8" coarse threads and four speed shift pattern and has the correct walnut grain pattern. {specs}...
1969-72 Cutlass, Skylark, GTO, GS; Hurst Shifter 3 Piece Tab Set
Reproduction Hurst shifter tab set for 1969-72 Pontiac GTO, Oldsmobile Cutlass, 442, W30, W31, Buick Skylark models with a Hurst shiter. These shifter tabs are die stamped they fit very and are a press to fit installation....
1968-72 Pontiac GTO; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
Cast aluminum Hurst 4 speed shifter mounting plate/bracket for 1967-72 Pontiac GTO, LeMans, 1967-70 Tempest, 1969-72 Pontiac Grand Prix and 1967-72 Oldsmobile Cutlass models. This reproduction shifter bracket allows the...
Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
1970-81 Camaro, Firebird; Gearshift Boot Retainer Plate; for Manual Trans; Black
Reproduction shift boot retainer plate for 1970-81 Camaro and Firebird models with 3-speed or 4-speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel replicating the original design...
1967-72 Small Block Clutch Fork Return Spring
OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 3-5/8" O.L. 2-1/2" spring portion. Applacations: 1967-69 Camaro small block 1967-69 Firebird...
1967-75 Return Spring Extension Rod
Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...
1970-81 Camaro, Firebird; Lower Shift Boot Seal; with Manual Trans
Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
1966-72 Pontiac, 1968-69 Firebird,1969 Camaro; Hurst Floor Shift Boot; 3 or 4 Speed; Manual Trans
Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...
1975-81 Camaro, Nova, Corvette, Firebird; Clutch Flywheel Housing Cover; Manual Trans; T10; OER
Reproduction of the original clutch flywheel housing cover designed for use on various 1975-81 GM vehicles with Borg Warner T-10 manul transmissions. This cover is used to protect the clutch flywheel housing for vehicles with...
1970-81 Camaro, Firebird; Gearshift Boot Retainer Plate; Manual Transmission; Chrome Plated
Reproduction shift boot retainer plate for 1970-81 Camaro and Firebird models with 3-speed or 4-speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel replicating the original design...
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1968-69 Camaro, Firebird, 1968-74 Chevy II, Nova; Clutch Linkage Kit; Big Block
Reproduction of the original components needed to replace the cluch linkage on 1968-69 Camaro big block models, 1968-74 Chevy II / Nova big block models and 1968-69 Firebird (V8) models. You'll be pleased with this all new...
Clutch Linkage Kit ; 1967 Camaro Big Block, 1967 Firebird V8
Reproduction of the original components needed to replace the clutch linkage on 1967 Camaro big block models, and 1967 Firebird V8 models. You'll be pleased with this all new pre-packaged clutch linkage set. Whether replacing...
1967 Camaro, Firebird Clutch Linkage Set ; Small Block; V8
Reproduction of the original components needed to replace the cluch linkage on 1967 Camaro small block and 1967 Firebird (L6) models. You'll be pleased with this all new pre-packaged clutch linkage set. Whether replacing worn...
Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models equipped with 4-speed Hurst shifters. Works with both original and reproduction Hurst...
OER® reproduction of the original console seal cover originally installed on 1967 Camaro, 1967 Firebird or 1968-72 Chevy II/Nova models with a factory 3 or 4-speed manual transmission. Each seal is manufactured to exact...
1968-72 Frame Side Bellcrank Pivot Ball Bracket
OER® reproduction of the original frame side bellcrank pivot bacll beacket designed for use on various GM models. Each bracket is die-blanked and formed with the correct offset and holes for mounting. 1 bracket required...
1970-81 Clutch Bellcrank Pivot Ball Bracket ; Frame Side ; Camaro. Firebird
OER® reproduction of the original frame side clutch bellcrank pivot ball bracket designed for use on 1970-81 Camaro and Firebird models with manual transmissions. This steel bracket attaches to the vehicles frame....
1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel
OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...
1968-69 Camaro, 1968-74 Nova, 1968-69 Firebird; Clutch Linkage Set; Small Block, L6
Reproduction of the original components needed to replace the clutch linkage on 1968-69 Camaro small block models, 1968-74 Chevy II / Nova models and 1968-69 Firebird (L6) models. You'll be pleased with this all new...