Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1965-66 Plymouth Valiant; Convertible Top; Pinpoint; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1956-64 Chrysler, Dodge, Plymouth; Convertible Top Motor and Pump Assembly
This OE style replacement motor and pump assembly features original style locations for electric and fluid connections. Fits a wide variety of 1956-64 Chrysler, Dodge, Plymouth, Imperial, and Desoto models including, but not...
1963-64 Plymouth Valiant; Convertible Top; Pinpoint; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side
Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1963-64 Plymouth Valiant; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each
Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...
1965-66 Plymouth Valiant; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1970-73 Duster, Dart, Valiant, Scamp, Demon; Outer Door Sport Mirrors; Pair
Reproduction of the original style Sport outer door mirror designed for use with 1970-73 Dodge and Plymouth A body models equipped with the remote style sport mirror option. Pair includes the drivers side remote mirror, and...
Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1970-76 Dodge Dart, Duster, Valiant; Rallye Sport Outer Door Mirror; Primer; LH Driver Side
Reproduction Rallye outer door mirror for 1970-76 Dodge, Plymouth A-body models. Each mirror is manufactured to correct factory specifications and offered in primer. Paint as required. Fits the LH driver side.
1969-72 Dart/1971-72 Valiant; 2-Door Hardtop; Door Glass; Tinted; RH
Replace your scratched, broken or missing original door glass with this new reproduction glass. Each glass is made of tempered safety glass that is the correct thickness and is not date coded). Note: Pictured for illustration...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
Reproduction of the original front windshield glass for use with all 1967-76 Dodge and Plymouth A-Body models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against...
1965-74 Chrysler, Dodge, Plymouth; Windshield Washer Pump; Replacement
Replacement style windshield washer pump assembly designed for use with the applications listed below. The windshield washer pump circulates water from the windshield washer jar to the washer nozzles. This is a replacement...
1967-76 Dart, Barracuda, Valiant, Duster; Windshield Wiper Arms; Anco Style; Pair
Reproduction of the original Anco style wiper arms designed for use with 1967-76 Dodge and Plymouth A-body models. Each wiper arm is manufactured from stamped and formed polished stainless steel featuring a chrome plated cap...
1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each
Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...
1970-76 Dodge Dart, Duster, Valiant; Rallye Sport Outer Door Mirror; Primer; RH Passenger Side
Reproduction Rallye outer door mirror for 1970-76 Dodge, Plymouth A-body models. Each mirror is manufactured to correct factory specifications and offered in primer. Paint as required. Fits the RH passenger side.
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1963-66 Dart, Valiant, Barracuda; Outer Door Handle Set; with Push Buttons; RH and LH
Reproduction of the original style outer door handles designed for use with 1963-66 Dodge Dart, and Plymouth Valiant, Barracuda models. Manufactured in die-cast zinc to factory specifications. Includes handles, push buttont,...
Reproduction of the original door vent glass for use with 1963-66 Dodge Dart, Plymouth, Barracuda, and Valiant 2 door hardtop and convertible models. Replacing your original glass will eliminate any scratches, chips, or...
1966-74 Dodge, Plymouth A & B Body; Lower Front Door Hinge; LH; Driver Side; Various Models
This reproduction door hinge is designed for use on a wide range of 1966-1974 Dodge and Plymouth A and B Body vehicles. The heavy factory doors on these Mopar models often caused premature hinge wear, leading to sagging...
Reproduction outer door handles for various 1971-76 Dodge and Plymouth A-Body models and 1972-93 Dodge D/W Series trucks. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
Reproduction of the original front door glass for use with 1963-66 Dodge Dart, and plymouth Valiant 2 door hardtop and convertible models. Replacing your original glass will eliminate any scratches, chips, or cracks the...
Reproduction of the original front door glass for use with 1963-66 Dodge Dart, and plymouth Valiant 2 door hardtop and convertible models. Replacing your original glass will eliminate any scratches, chips, or cracks the...
1967-74 Dodge, Plymouth A-Body; Upper Front Door Hinge; RH; Passenger Side
Reproduction of the original door hinge for various Dodge and Plymouth A-Body models. The front doors on 1967-74 Mopar A-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to...
1963-70 Dodge, Plymouth; Windshield Washer F Connector; A-Body Models; White
Reproduction of the original windshield washer "F" style connector designed for use with 1963-70 Mopar A body models. Built to original specifications and features the correct coloration for an unmatched fit and appearance....
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1968-71 Chrysler, Dodge; Plymouth; Windshield Wiper Motor; 2-Speed; New, Not Rebuilt!
New windshield wiper motor for various 1968-71 Mopar models. Manufactured using all new tooling for a crisp, clean, factory fresh appearance, this motor is meticulously engineered as an improvement over the original design....
1972-84 Chrysler, Plymouth, Dodge; Windshield Wiper Motor; 2 Speed; New, Not Rebuilt
New windshield wiper motor for various 1968-71 Mopar models. Brand new tooling for a crisp and clean look. Meticulously engiineered as an improvement over the original design. The motor gears are designed with a stronger,...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
Reproduction Viewmaster style manual outer door mirror for various 1960-66 Chrysler, Dodge and Plymouth models. This quality reproduction is manufactured in die-cast zinc replicating the original in quality, design, and...
1961 Dodge Lancer / Plymouth Valiant; 2 Door Hardtop; Quarter Glass; Front; Clear
Replace your missing, scratched or broken original front quarter glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers...
1961 Dodge Lancer / Plymouth Valiant; 2 Door Hardtop; Quarter Glass; Front; Tinted
Replace your missing, scratched or broken original front quarter glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers...
1961-62 Lancer/Valiant; 2-Door Hardtop/Sedan; Quarter Glass; Rear Position; Tinted
Replace your missing, scratched or broken original rear quarter glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers...
1961 Dodge Lancer / Plymouth Valiant; 2-Door Hardtop; Door Glass; Clear
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers side). Note:...
1962 Lancer/Valiant; 2-Door Hardtop; Door Glass; LH/RH; Clear
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers side). Note:...
1962 Lancer/Valiant; 2-Door Hardtop; Door Glass; LH/RH; Tinted
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers side). Note:...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1967-74 Mopar; Windshield Washer Nozzle Kit ; A-Body
Reproduction of the original components required to replace the windshield washer nozzles and hardware for 1967-74 Mopar A Body models. Manufactured to original specifications and features quailty plating for an unmatched fit...
1966-76 Dodge/Plymouth A & B-Body; Mount Pad; For Outer Remote Door Mirror; Each
Reproduction of the original style outer door mirror pads designed for use with 1967-76 Dodge, Plymouth A Body, and 1966-70 B Body models as listed. Each gasket is manufactured with modern, firm 80 durometer EPDM rubber...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1959-79 AMC, GM, Ford, Mopar; "TRICO" Windshield Wiper Blades; 15" Length; Pair; Various Models
Reproduction of the original 15" "TRICO Style # PR-15-2W" wiper blades designed for a wide variety of classic vehicles including GM, Ford, Chrysler, Studebaker, Mercury, AMC, and International models. Each blade features...