Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2-Door Hardtop, Coupe; Tinted
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2 Door Hardtop, Coupe; Clear
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop models. Replace your missing, scratched or broken original vent glass...
1962 Dodge Dart / Plymouth Fury / Sport Fury; Convertible Top; Pinpoint; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1963 Dodge/Plymouth; B-Body; Hardtop/Sedan; Back Glass; Tinted
Replace your pitted, scratched or broken original back window glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...
1962 Dodge Dart / Plymouth Fury / Sport Fury; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1964-65 Dodge, Plymouth B-Body; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1956-64 Chrysler, Dodge, Plymouth; Convertible Top Motor and Pump Assembly
This OE style replacement motor and pump assembly features original style locations for electric and fluid connections. Fits a wide variety of 1956-64 Chrysler, Dodge, Plymouth, Imperial, and Desoto models including, but not...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
This replacement windshield is made with tempered laminate safety glass that is designed to protect passengers from road debris in the event of an accdent and features a green tinted band at the top. Note:All glass is...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1964-65 Ddoge, Plymouth C-Body; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1964-65 Dodge, Plymouth C-Body; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1963 Fury, Polara; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
OER reproduction of the front windshield glass for use with various Chrysler, Plymouth and Dodge full-size C-Body passenger car models as listed. This windshield is manufactured with tempered laminate safety glass that meets...
OER reproduction windshield glass for various 1964-65 Dodge 330, 440, Polara, Coronet, and Plymouth Belvedere, Fury, and Savoy models. This windshield is manufactured with tempered laminate safety glass that meets the...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1965-74 Chrysler, Dodge, Plymouth; Windshield Washer Pump; Replacement
Replacement style windshield washer pump assembly designed for use with the applications listed below. The windshield washer pump circulates water from the windshield washer jar to the washer nozzles. This is a replacement...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1970-81 GM, Mopar; Windshield Wiper Blade Insert; TRICO; 18"; Each; Replaces 43-180; Various Models
OER reproduction of the original Trico-style 43-180 windshield wiper blade refill set for a wide variety of vehicle applications. Each blade insert is manufactured for perfect fit, function and period-correct appearance....
Reproduction of the original wiper blade units designed for use on 1970-1981 Camaro models with recessed style wipers and a wide variety of other makes and models. Manufactured in the correct design featuring the blade and...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1962-65 Dodge, Plymouth; B-Body; Door Hinge; Upper; LH Driver Side
Reproduction of the original door hinge for 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in quality, design,...
1962-65 Dodge, Plymouth; B-Body; Upper Door Hinge; RH Passenger Side
Reproduction of the original door hinge designed for use 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1962-65 Dodge, Plymouth; B-Body; Door Hinge; Lower; LH Driver Side
Reproduction of the original door hinge for 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in quality, design,...
1968-71 Chrysler, Dodge; Plymouth; Windshield Wiper Motor; 2-Speed; New, Not Rebuilt!
New windshield wiper motor for various 1968-71 Mopar models. Manufactured using all new tooling for a crisp, clean, factory fresh appearance, this motor is meticulously engineered as an improvement over the original design....
1962-65 Dodge, Plymouth; B-Body; Lower Door Hinge; RH Passenger Side
Reproduction of the original door hinge for 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in quality, design,...
Reproduction wiper motor for various 1972-1979 Chrysler, Plymouth, and Dodge models. This brand new unit is engineered using advanced modern manufacturing technology to deliver reliable long-term performance and a correct...
1962-64 Mopar B-Body 4-Door Hardtop; Front Door Glass; Clear
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Fits left hand (drivers side) or right hand (passengers side). All...
1962 Dodge/Plymouth B-Body; 2 Door Hardtop; Quarter Glass; Clear
Replace your pitted, scratched or broken original quarter window glass with this new DOT (department of transportation) certified replacement tempered safety glass. All glass is carefully packed by professionals to prevent...
Reproduction Viewmaster style manual outer door mirror for various 1960-66 Chrysler, Dodge and Plymouth models. This quality reproduction is manufactured in die-cast zinc replicating the original in quality, design, and...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1962 Dodge/Plymouth Convertible; Quarter Glass; Clear
Replace your pitted, scratched or broken original quarter window glass with this new DOT (department of transportation) certified replacement tempered safety glass. All glass is carefully packed by professionals to prevent...
1962 Dodge/Plymouth Convertible; Quarter Glass; Tinted
Replace your pitted, scratched or broken original quarter window glass with this new DOT (department of transportation) certified replacement tempered safety glass. All glass is carefully packed by professionals to prevent...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1963-74 Dodge, Plymouth; Spare Tire Wing Nut
Reproduction of the original spare tire wing nut designed for use with various 1963-74 Dodge and Plymouth models. Each nut is manufactured in stamped steel to factory specifications. Features same design, appearance, and...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Lime Light Green Plymouth Rapid Transit System License Plate Frame
Is your Plymouth part of the Rapid Transit System? Proudly display your Mopar pride with this custom license plate frame. Made in USA Mopar® Official Lic ensed Product