1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1968-92 GM, Chrysler; Door Jamb Switch; 2 Terminal
Replacement door jamb switch for use on various 1968-92 GM models. This 2 terminal switch is manufactured to fit and function as original and specifically designed for the models listed below. Replacing this switch will help...
Reproduction Chrysler, Dodge, and Plymouth turn signal switch assembly to replace the worn out or non-functioning original Mopar unit. Manufactured to exact specifications, each switch features a correctly constructed...
Correct OER® reproduction of the Sparton horns designed for various 1967-71 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...
1966-73 Chrysler, Dodge, Plymouth; Battery Hold Down Set; Various Models
Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....
1969-70 Dodge, Plymouth B-Body; Positive Battery Cable - Big Block; with 1-Piece Molded Starter Lug
Reproduction battery cables for 1969-70 Dodge and Plymouth big block models with 1-piece molded starter lug. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original...
1970-74 Dodge, Plymouth; Positive Battery Cable; A/B/E-Body Models; 43-1/2" overall length
Reproduction of the original positive battery cable for use with 1970-74 Dodge and Plymouth models. Each cable is designed and manufactured to replicate the original in appearance and lead length. The positive cable assembly...
1965-74 AMC, Dodge, Plymouth; Gauge Cluster Voltage Limiter; Various Applications
This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it's required when using...
Reproduction Chrysler, Dodge & Plymouth turn signal switch assembly to replace the worn out or non functional original. Manufactured to exact specifications, each switch features injection molded construction with correctly...
1970-74 Dodge, Plymouth B / E Body; Battery Tray
Reproduction of the original battery tray designed for use on various 1970-72 Dodge and Plymouth B-Body and 1970-74 E Body models. Manufactured in quality stamped steel to Mopar specifications. Features correct mounting...
Cloth Wiring Harness Tape; 1" x 100 foot
If you want an OEM quality and appearance for your original or reproduction wiring, this specially manufactured black! This adhesive back tape will allow you to re-wrap your existing harness or replace tape which may have...
Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...
Delco Energizer R89 Side Post Battery Topper
Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat top...
Top Post Battery Cable Terminal
Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...
OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp
The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...
1966; Dodge, Plymouth B-Body; Engine & Forward Light Harness Fusible Link; Each
Reproduction fusible link. Manufactured with the same high quality materials used for our wiring harnesses because these fusible links are included as a part of the harnesses. If your harness needs a new fusible link, these...
Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...
1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat
Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...
Starter Bolt 3/8"-16 X 4-11/16"
Replacement starter bolt for models that require a 3/8"-16 x 4-11/16" bolt.
1956-96 AMC, Chrysler, GM, Ford; Wiring Connector; 2-Terminal; Female; Various Applications
Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...
Dodge, Plymouth A, B, E Body; Battery Hold Down J-Bolt; 7"
Reproduction battery hold down J bolt for various Dodge and Plymouth models. Each bolt is a reproduction of the original style battery hold down bolt. This is a 7" bolt. Refer to part number # 2074089 for 8.5" bolt. {fitment}
1967-74 Dodge, Plymouth A, B, E; Battery Hold Down J-Bolt; 8.5"
Exact reproduction of the original battery hold down J bolt designed for use with 1967-74 Dodge and Plymouth A, B, and E body models as listed. Measures 8.5". Refer to part number # 2534814 for 7" bolt. {fitment}
1969 Dodge, Plymouth B-Body; Under Dash Wire Harness; with Oil Gauge Provision
Reproduction of the original complete under-dash harness for use with 1969 Dodge and Plymouth B-body models. Each harness features correct color wires, factory style connectors, and is wrapped in non-adhesive black vinyl wrap...
Front Fender Wire Harness Straps; 2-1/4" Long; Black Nylon
A hot exhaust manifold can cause serious damage to your electrical system. If not properly fastened, the wiring harness leading to your alternator/generator or other wiring harnesses could fall into an open area between the...
1963-66 Dodge, Plymouth A/B-Body; Turn Signal Switch; without Tilt; 7 Wire Switch
Reproduction turn signal switch for 1963-66 Mopar A and B-Body models without tilt steering wheel. Each turn signal switch replicates the original allowing a complete replacement of the old or non-working original. Includes...
1970-76 Dodge; Plymouth; 1970-71 B & E-Body; 1970-76 A-Body; Battery Hold Down Set
Reproduction of the original battery mounting hold down set designed for various 1970-1976 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction. Each...
1967-71 Dodge, Plymouth; Turn Signal Switch; w/o Tilt ; 7 Wire Switch; A, B, E-Body; 1st Design
Reproduction turn signal switch for 1967-71 Mopar A, B & E-Body models without tilt steering wheel. This switch is manufactured to exact factory specifications and comes with metal connectors attached to the ends of the wires...
1970-72 Dodge, Plymouth; B/E-Body; Negative Battery Cable; 23-1/2"; 383ci, 440ci, 400, 440-6P
Reproduction negative battery cable for 1970-72 Dodge and Plymouth models for B & E body models. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original and will...
1966-69 Dodge, Plymouth B-Body; Battery Tray; EDP Coated
Reproduction of the original battery tray designed for use on various 1966-1969 Dodge and Plymouth B-Body models. Manufactured in quality stamped steel to Mopar specifications. Features correct mounting points and pre-drilled...
1968-78 Chrysler/Plymouth/Dodge; Horn Switch; With Die Cast Tuff Wheel Horn Button Retainer
OER Reproduction horn switch to fit a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded material just like the original Mopar item. An excellent replacement switch to help...
1968-78 Chrysler, Dodge, Plymouth; Horn Switch; with Plastic Tuff Wheel Horn Cap Retainer
Service replacement horn contact assembly that fits a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded ABS just like the original Mopar contact. An excellent reproduction...
Reproduction of the original battery tray brace designed for 1966 & 1971-72 B-Body, and 1970-74 E-Body Dodge and Plymouth models as listed below. Each bracket is manufactured in stamped steel to original specifications and...
1962-81 Mopar, AMC; Headlamp Switch; 7 Terminals Plus Ground; With 1-1/4" Rheostat
Reproduction headlamp switch for various 1962-81 Mopar A and B-Body models and other models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used on...
1967-68 Dodge, Plymouth; B Body; Back-Up Lamp Wiring Harness
Reproduction of the original back-up lamp harness designed for use on 1967-68 Mopar B-body and 1968 A body models. This back-up lamp harness connects the bulkhead to the transmission backup switch. Other connections may vary...
OER Smart Charger 800; Battery Charger And Maintainer; 12V; 0.8 Amp
The OER Smart Charger 800 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell) batteries....
3/8"-16 X 3-5/8" Starter Mount Bolt
This replacement shouldered medium length bolt commonly used to secure starters with a cast iron staggered pattern nose to a big block engine. Two bolts required per vehicle.
Headlamp Switch; 3 Position; Universal Fit
Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...
1980-15 4-Terminal Make & Break Miscellaneous Relay
Reproducion 4 terminal make and break relay used for various functions such as lighting, horns on a multitude of vehicles from 1980-2015. This 4 terminal relay is also popular in the aftermarket for lights, light bars, vacuum...
1960-84; GM, Chrysler, Dodge, Plymouth; Door Jamb Switch; Single Terminal; Each
Replacement single terminal door jamb switch designed for use on various models. Replace the old, damaged or non working door jamb switch with this quality service replacement. The door jamb switch will get your interior dome...
Heater Hose Clip for Inner Fender Skirt; Various GM Applications
This hose clip is designed to secure a pair of heater hoses to the inner fender skirt to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. This heater hose clip was original equipment on...
Headlamp Pigtail Socket; 3 Prong; Each; Various Models
Replace missing, cracked or brittle plastic headlamp socket pigtail assembly with this quality reproduction. This replacement, heavy duty 3-wire headlamp plug will replace the original plug on most vehicles equipped with dual...
1969-77 Chrysler, Dodge, Plymouth; Power Window Switch; 1 button; Concave Button
Reproduction of the original power window switch designed for use on 1969-77 Chrysler, Dodge, and Plymouth models. This switch is manufactured with a concave style button and includes the correct grain and surrounding bezel....
This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it's required when using...
1968-69 Dart, Charger, Super Bee, Coronet; Horn Cap Emblem; Mopar Licensed
OER reproduction of the original Dodge horn cap emblem originally designed for use with 1968-69 Dart, Charger, Super Bee, Coronet, Polara, and Monaco models originally equipped with a standard, or wood grain style steering...
External Tooth Lock Washer, 1/4" ID, Zinc Plated, 10 PieceSet
Correct style external tooth lock washers used on various GM vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part...
External Tooth Lock Washer, 3/8" ID, Zinc Plated, 10 Piece Set
Correct style external tooth lock washers used on various GM vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part...
External Tooth Lock Washer, 7/16" ID, Zinc Plated, 10 Piece Set
Correct style external tooth lock washers used on various GM vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part...
12 Volt: Auxiliary Power Outlet; With Cover
Add an additional 12V power outlet to your vehicle with a universal fit 12 volt power outlet assembly with cover. The plastic cover prevents dirt and moisture from entering the socket. This dependable source of 12V power,...
1966-67 Dodge, Plymouth B-Body; Turn Signal Lever Arm
Reproduction of the original turn signal lever arm designed for use with 1966-67 Dodge and Plymouth Charger, Coronet, and Plymouth Belvedere and Satellite models. Each lever arm is manufactured in quality stamped steel...
1976-78 Chevrolet Chevette; Headlamp Switch; Universal Fit;
Reproduction of the hard-to-find switch to replace original inoperative headlamp switch on 1976-78 Chevette. This reproduction switch will fit exactly as original and is designed as a service replacement for original GM part...
1959-72 GM, Chrysler, AMC; Alternator, Voltage Regulator Wiring Connector Pigtail
Replacement alternator or voltage regulator pigtail assembly for numerous GM, Chrysler and AMC models. These very important components are often burnt or corroded, preventing your vehicle's charging system from operating...
Reproduction 2 1/4" heater hose bracket for a wide variety of GM models from 1938-93. This hose bracket is designed to secure two heater hoses to the alternator bracket to prevent damage of the hoses and keep the engine...
H4 - 2 Headlamp System Wiring Upgrade Set
This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will be...
1966-70; Mopar B-Body; Engine Wiring Strap; Set
Clean up the wiring in your engine compartment with this replacement wiring strap and fastener set. Includes all of the original type fasteners and clips required to get your wiring secured and properly adhered to the...
H4 - 4 Headlamp System Wiring Upgrade Set
This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will be...
1930-2002 GM, Chrysler, Ford, Universal Under Hood and Trunk Lamp; with Bulb and Wiring
Add an under trunk or hood lamp to your classic with this universal lamp and wiring set. Designed for versatility, this set works with virtually any vehicle from 1930 and later. Each unit comes complete with the mounting...
Reproduction "Final Design" turn signal switch for 1967-71 Mopar A, B, C, & E-Body models without tilt wheel. This switch comes with metal connectors attached to the ends of the wires and includes the plastic connector for a...
1966-70 Dodge, Plymouth B-Body; Back Up Lamp Switch; Automatic Transmission
Reproduction 1966-70 B-Body reverse light switch. Manufactured to exacting standards, this reverse lamp switch will fit and function as original. Fits a variety of Dodge and Plymouth B-Body hardtop and convertible models...
1963-64 Plymouth A/B-Body; Headlamp Switch Assembly; 7 Terminals Plus Ground; With 1-1/4" Rheostat
Reproduction of the original headlamp switch assembly for 1963-64 Plymouth Barracuda, Belvedere, Savoy, Valiant and Fury & Sport Fury models. This switch features 7 terminals plus a ground spade on the bottom, rear of the...
1963-69 Mopar; Turn Signal Switch Connector
Reproduction of the original turn signal switch connector designed for use with various 1963-69 Mopar vehicles. Manufactured in injection molded ABS to correct factory specifications. This connector replaces the broken and...