Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
1967-70 Dodge, Plymouth A, B-Body; Front Outer Door Handle Set; with Black Buttons
Reproduction of the original outer door handles designed for use with various 1967-1970 Dodge and Plymouth A, B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished...
1966-67 Dodge, Plymouth B Body; Front Outer Door Handle Set; with Chrome Buttons
Reproduction of the original outer door handles designed for use with various 1966-67 Dodge and Plymouth B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome...
1966-74 Dodge, Plymouth; Lower Front Door Hinge; LH; Driver Side; Various Models
Reproduction door hinge for various Dodge and Plymouth A and B-Body models. The front doors on 1966-74 Mopar A and B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to...
1968-70 Dodge, Plymouth; Door Striker Plates; with Screws
Reproduction door striker plates originally installed on 1968-70 Dodge and Plymouth B-Body models. Each plate is manufactured in stamped steel and zinc coated for long lasting dependability. {specs} {fitment}
1966-70 Dodge, Plymouth B Body; Upper Front Door Hinge; LH; Drivers Side
Reproduction door hinge for various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to factory...
1966-70 Dodge, Plymouth B Body; Upper Front Door Hinge; RH; Passenger Side
Reproduction door hinge for various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to factory...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1962-65 Dodge, Plymouth; B-Body; Door Hinge; Upper; LH Driver Side
Reproduction of the original door hinge for 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in quality, design,...
1962-65 Dodge, Plymouth; B-Body; Upper Door Hinge; RH Passenger Side
Reproduction of the original door hinge designed for use 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in...
1962-65 Dodge, Plymouth; B-Body; Door Hinge; Lower; LH Driver Side
Reproduction of the original door hinge for 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in quality, design,...
1962-65 Dodge, Plymouth; B-Body; Lower Door Hinge; RH Passenger Side
Reproduction of the original door hinge for 1962-65 Dodge and Plymouth B-Body models. Each hinge is manufactured in heavy-duty stamped steel to factory specifications replicating the original door hinge in quality, design,...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Reproduction flat style phillips head machine screws for latches and strikers on various classic makes and models. Fits the door striker on 1947-51 Chevrolet and GMC truck models. Fits the door latch on various 1966-74 Dodge...
1962-65 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set
Reproduction of the original door hinges for 1962-65 Dodge or Plymouth B-Body models. Each hinge is manufactured to factory specifications ensuring a quality appearance and fit. Includes 2 upper and 2 lower door hinges, ready...
1966-70 Mopar B-Body Door Hinge Set
Reproduction of the original door hinges designed for use on various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge...
1966-70 Dodge, Plymouth B-Body; Front Door Window Regulator; 2 Door; Drivers Side
Reproduction of the original front window regulator designed for use with various 1966-70 Dodge and Plymouth 2 door models. Manufactured to OEM specifications from stamped steel construction, each regulator features the...
1969-2002 Nylon Rod Clip, Fits 5/32" Rod Diameter; 1/4" Hole Size; LH Driver Side; Varius Models
Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...
1966-70 Dodge, Plymouth B-Body; Front Door Window Regulator; 2 Door; Passenger Side
Reproduction of the original front window regulator designed for use with various 1966-70 Dodge and Plymouth 2 door models. Manufactured to OEM specifications from stamped steel construction, each regulator features the...
1962-65 Dodge, Plymouth B-Body; Outer Door Handle Set; with Chrome Push Buttons; Front or Rear Doors
Reproduction of the original outer door handles designed for use with various 1962-65 Dodge 330, 440, Polara, Polara 500 and Coronet and Plymouth Belvedere, Fury, Sport Fury, Savoy and Satellite models. Each door handle is...
1966-74 Dodge, Plymouth; Lower Front Door Hinge; RH; Passenger Side; Various Models
Reproduction door hinge for various Dodge and Plymouth A and B-Body models. The front doors on 1966-74 Mopar A and B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to...
1968-81 GM; Door Glass Roller Washer; Various Models
Reproduction plastic washer that pushes through the door glass on various 1968-81 GM models. Exact reproduction of the original door glass roller washer. Sold individually. Use as required. Replaces OE # 4491087. {fitment}
1968-70 Dodge, Plymouth B-Body; Door Latch and Lock Clip Set
Reproduction of the various components required to help keep your door latch operating smoothly. Replacing the door latch and lock clips will help keep your doors operating properly just the way the factory intended. Includes...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 2.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1968-70 Mopar Striker Plate Shim 1.50MM ; B-Body
Correctly stamped reproduction of the original 1968-70 striker shim plate designed for use on B-Body models. Manufactured in die-stamped steel with zinc plating for corrosion resistance. Designed to shim the door striker...
1968-70 Mopar Striker Plate Shim.60MM ; B-Body
Correctly stamped reproduction of the original 1968-70 striker shim plate designed for use on B-Body models. Manufactured in die-stamped steel with zinc plating for corrosion resistance. Designed to shim the door striker...
1962-65 Coronet, Dart, Polara, Belvedere, Fury; Door Hinge Spring and Roller; Each
Reproduction of the original style dooe hinge spring and roller designed for use with 1962-65 Dodge and Plymouth B Body models. When you are rebuilding your door hinges, don't stop at pins and bushings, make sure you replace...
Reproductionl vent window frame assemblies for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This complete set...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Tinted Glass; LH, Driver Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1968-70 Dodge, Plymouth B Body; Door Lock Knob Ferrules; Pair
Reproduction of the original door lock knob ferrules designed for use on 1968-70 Mopar B- body models. Each ferrule is manufactured in stamped stainless steel that replicates the original in quality and design. The ferrules...
1966-74 Dodge, Plymouth; A, B, E Body; Lower Door Hinge Spring; Each
When you are rebuilding your door hinges don't stop at pins and bushings, make sure you replace those worn out springs at the same time. Replace the worn out hinge spring with this reproduction designed to fit and function...
1964-98 GM; Door Lock Striker Bolt Shim - 4.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1968-70 Dodge, Plymouth B-Body; Vent Window Assemblies; Clear Glass, RH & LH; Pair
Reproduction of the vent window frame assemblies designed for various 1968-70 Mopar B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This complete...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Clear Glass; LH, Driver Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Tinted Glass; RH, Passenger Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Clear Glass; RH, Passenger Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1966-76 Dodge, Plymouth; A, B, E Body; Door Hinge Repair Kit
Replacement door hinge pin and bushing set for various 1966-76 Dodge and Plymouth A, B and E-Body models. The components in this kit will restore proper door alignment and provide for quieter operation when opening and...
1966-70 Dodge, Plymouth B Body; Rear Quarter Window Roller & Hardware Set; 2 Door
Reproduction of the original quarter window glass rollers for use on 1966-70 Dodge and Plymouth B-body 2 door models. Manufactured from high quality injection molded material with precision machined and stamped steel...
1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each
This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...