OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
1964-74 Dodge/Plymouth A, B, E-Body; Trunk Weatherstrip; With Y Profile
Reproduction of the original trunk weatherstrip designed for use on various 1964-1973 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a Y profile configuration matching the original in fit and appearance....
1962-78 Dodge/Plymouth A, B & E-Body; Hood Adjust Bumper
Factory style replacement hood adjust bumper for 1962-78 A, B and E-Body models. Designed to factory specifications and manufactured in rubber to correctly replace the hood adjust bumper. This bumper features a 1-1/4" outer...
1970-74 Challenger, Barracuda, Cuda; Door Frame Weatherstrip, with End Caps, Pair; OER
Reproduction of the original style door frame weatherstripping designed for use on 1970-74 E body Mopar models. Designed to factory specifications and manufactured in quality EPDM rubber to correctly replace the door seal...
1967-72 Dart, Barracuda, Valiant; Vent Window Weatherstrip Seals; 2 Door Coupe; Pair
Reproduction of the original vent window weatherstrip designed for use on 1967-72 Mopar A body 2 door coupe models. Keep out moisture and reduce cabin noise by replacing the cracked original vent window weatherstrip....
1971-76 Dodge, Plymouth A, B, E Body; Trunk Weatherstrip; with D Profile
Reproduction of the original trunk weatherstrip designed for use on various 1971-76 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a D profile configuration matching the original in fit and appearance....
1970 Dodge, Plymouth E-Body; Quarter Window Seals; Coupe, Convertible; Pair
Reproduction of the original vertical quarter glass weatherstrip seals designed for use on 1970 Mopar E-Body 2-door hardtop or convertible models. Manufactured to factory specifications with quality EPDM rubber. Features...
1937-87 GM; Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required. Precision-molded from quality EPDM rubber to replicate the original plug size, shape, and material, this...
1967-74 Chrysler, Dodge, Plymouth; A, B, C Body; Front Door Glass Channel Seals; with Clips; Pair
Reproduction front door glass channels for 1967-74 Dodge and Plymouth A-Body, and 1966-70 B-Body and C-Body models as listed. These front door glass seals attach to the front of each door window in order to allow the glass to...
1962-70 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1962-70 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural
This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...
1967-72 Dart, Barracuda, Duster, Valiant; Door Frame Weatherstrip, 2 Door Coupe, Hardtop, Pair
Reproduction door frame weatherstrips seals for 1967-72 Dodge and Plymouth A-body 2-door models. Each door weatherstrip seal is manufactured from premium quality EPDM molded rubber replicating the original in design and...
1970-74 Dodge/Plymouth E-Body; Door Jamb Seals, Pair
Reproduction of the original door jamb rubber U shaped rubber seals designed for use on 1970-74 Mopar E-Body 2 door hardtop models. Each seal mounts on the rear top edge of the quarter panel door jamb area at the edge of the...
1967-74 Dodge/Plymouth A-Body; Rubber Bumper Set
Factory-style reproduction rubber bumper set for various 1967-74 Dodge & Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove box bumpers Trunk...
1970-74 Challenger, Barracuda, Cuda E-Body; Quarter Window Vertical Seals; Coupe & Convertible; Pair
Reproduction of the original vertical quarter glass weatherstrip seals designed for 1971-74 Mopar E-Body hardtop (coupe), or convertible models. Manufactured to factory specifications with proper contours to correctly replace...
1968-74 Dodge/Plymouth A, B & E-Body; Hood Side/Trunk Rubber Bumper; 7/8" X 7/8"
Factory-style replacement hood side stop and trunk bumper for various 1968-74 Mopar A, B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper. Sold individually.
1962-74 Dodge/Plymouth B/E-Body; Hood Side/Trunk Rubber Bumper
Factory-style replacement hood side stop and trunk bumper for various 1962-65 Mopar B-Body models and 1968-74 B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper....
1971-79 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1972-79 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
1963-66 Mopar A-Body - Door Jamb Seal Screw Set - 6 Pieces
Reproduction door jamb and door end seal screws for 1963-66 A-Body cars. These phillips head screws are black-oxide coated and designed to accurately replace the screws in the door jamb seals and the door seal end caps....
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1967-72 Dart, Barracuda, Valiant, Scamp; Roof Rail Weatherstrip; 2 Door Hardtop; Pair
Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...
1970-74 Challenger, Barracuda, Cuda;Molded Door Seal End Cap, Pair
Factory-style replacement door seal end caps designed for use on 1970-74 Dodge and Plymouth E-Body hardtop and convertible models. This end cap is mounted to the door edge with screws and caps off the edge of the door...
Sealstrip Glass Setting Tape; 10 Foot Roll; 1/32" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1963-66 Dodge/Plymouth A-Body; Hood Side Rubber Bumper; Each
OER reproduction of the original hood side rubber bumper designed for various 1963-66 Mopar A-Body models. Each rubber stopper is designed to factory specifications to correctly replace the hood side stop bumper. Sold...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1963-91 GM, Mopar; Chrome Windshield Seal Lockstrip; 16" 10" Long x 1/2" Wide
Superb quality windshield lockstrip that replaces the old and worn out originals on various GM and Mopar vehicles. Produced with high grade rubber for long lasting dependability, each lock strip is designed to replicate the...
1971-74 Barracuda, Cuda, Challenger; Roof Rail Weatherstrip ; 2 Door; Coupe; Pair; OER
Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...
Door, Vent, Quarter Glass; Sealstrip Glass Setting Tape;10 Foot Roll; 1/16" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1970; Dodge/Plymouth E-Body; Roof Rail Weatherstrip Seal; Pair
Reproduction of the original style roof rail weatherstrip that installs along the upper roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...
Sealstrip Glass Setting Tape ; 10 Foot Roll ; 3/64" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1970-71 Plymouth Barracuda, Cuda; Tail Lamp Gasket Set; 4 Piece Set
Reproduction of the original tail light gaskets designed for use with 1970-71 Plymouth Barracuda and Cuda models. Each gasket set is precision manufactured to replicate the factory design for a correct fit and seal....
1969 Plymouth Barracuda; Tail Lamp Gasket Set; 4 Piece Set
These black firm automotive spec foam rubber EPDM gaskets are not molded rubber like the originals but are a quality functional equivalent that act as an excellent service replacement set. Each set contains the necessary...
1971 Dodge/Plymouth A, B, C, E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1971 Mopar A, B, C and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1960-76 Dodge/Plymouth; Rubber Body and Trunk Plug; 1-7/8"; Each
Reproduction of the original style body and trunk rubber plug designed for use on most 1960-76 Dodge or Plymouth models where a 1-7/8" hole plug is required. Manufactured in quality rubber material for an original appearance,...
1967-76 Dodge/Plymouth A-Body; Hood To Cowl Seal; With Clips
Reproduction of the original hood to cowl seal weatherstrip for use on 1967-76 Mopar A-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....
1941-76 Mohair Window Channel Liner ; 2-5/8" wide x 8" long
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...
1970-74 Mopar Door Jamb Seal Screw Set ; 16 Piece ; E-Body
Reproduction of the original door jamb and door end seal screws for 1970-74 Mopar B-Body vehicles. These phillips head screws are black-oxide coated and designed to accurately replace the screws in the door jamb seals and the...
1970-74 Dodge/Plymouth E-Body; Hood To Cowl Seal
Reproduction of the original hood to cowl seal weatherstrip for use on 1970-74 Mopar E-body models. This weatherstrip will help keep water and dirt out of the engine bay by sealing the area between the cowl panel and hood....
1941-76 Mohair Window Channel Liner ; 1-5/8" Wide x 8" Long x 1/16" Thick
When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...
1963-91 Chevrolet, GMC Truck; Windshield Lockstrip Joint Clip, Chrome; Various Models
Reproduction windshield lockstrip joint clip that replaces the old and worn out originals on various Chevrolet and GMC truck models. Produced with high grade mylar material for long lasting dependability, each lock strip...