Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1970 Plymouth Barracuda, and Cuda models. This reproduction fuel tank is manufactured in stainless steel replicating the original Mopar tank offering...
Correct reproduction of the original fuel tank designed for with 1971-1972 Plymouth Barracuda, and Cuda models. This reproduction fuel tank is manufactured in stainless steel replicating the original Mopar tank offering...
1970-75 Dodge, Plymouth A, B, E Body; Fuel Tank Filler Neck Grommet
Reproduction fuel tank to filler neck rubber grommet to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction grommet to eliminate vapor or fuel...
1972-74 Plymouth Barracuda; 18 Gallon Fuel Tank; Niterne Steel; CR8C
This is a high quality replacement fuel tank for 1972-74 Barracudas produced after April 1972. These are manufactured in authentic Ni-Terne steel (as original) and designed to look and fit like the originals. This is an...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1970 Plymouth Barracuda, Cuda; Niterne Fuel Tank; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1970 Plymouth Barrracuda and Cuda models. This reproduction fuel tank is manufactured in stamped NiTerne steel featuring a for superior rust and corrosion...
Reproduction of the original fuel tank designed for use with 1968-1970 Dodge Dart, and Plymouth Barracuda, Valiant models without EEC (evaporative emission control). This reproduction fuel tank is manufactured in quality...
1967 Dart, Valiant, Barracuda; Ni-Terne Coated Fuel Tank; 18 Gallon Capacity
Reproduction of the original fuel tank designed for use with 1967 Dodge Dart, and Plymouth Barracuda, Valiant models. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for...
Correct reproduction of the original fuel tank designed for with 1972-74 Plymouth Barrracuda and Cuda models. This reproduction fuel tank is manufactured in stamped steel featuring a Zinc coating for rust and corrosion...
1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel
Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...
1969-70 Charger, 1969 Barracuda; Quick-Fill Fuel Cap; with "Fuel" wording
Reproduction "Quick-Fill" fuel cap for 1969-70 Charger and 1969 Plymouth Barracuda models. Manufactured using factory specifications with great attention to detail, these vented replacement fuel caps offer a 'like-factory'...
1967-68 Barracuda, Charger, GTX; Quick-Fill Fuel Cap
Reproduction "Quick-Fill", also known as the "Flip Top" fuel cap for 1967-68 Plymouth Barracuda, 1967 GTX and 1968 Charger models. Manufactured using factory specifications with great attention to detail, this replacement...
1964-66 Dart, Barracuda, Valiant; Zinc Coated Fuel Tank; 18 Gallon
Correct reproduction of the original fuel tank designed for with 1964-66 Dodge Dart, and Plymouth Barracuda and Valiant models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy Zinc coating for...
1970 Plymouth Barracuda, Cuda; Zinc Coated Fuel Tank; with One Side Vent Pipe; 18 Gallon Capacity
Quality reproduction of the original fuel tank designed for use with 1970 Plymouth Barracuda and Cuda models. This fuel tank is manufactured to original specifications in zinc plated steel replicating the original...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1967 Dart, Barracuda, Valiant; Fuel Tank; Zinc Coated; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1967 Dodge Dart, Plymouth Barracuda, Valiant models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy Zinc coating for rust and...
1970-74 Dodge, Plymouth E-Body; Standard Fuel Tank Sending Unit; 5/16" Outlet
After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...
1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID
Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...
1967-76 Dart, Barracuda, Valiant, Duster; Vented Fuel Cap
Reproduction of the original fuel cap designed for use with 1967-76 Dodge Dart and Plymouth Barracuda, Valiant, Duster, Scamp, and Swinger models. Each cap is manufactured to factory specifications featuring a primer coating...
1967-71 Dart, Barracuda, Valiant; Chrome Fuel Cap; Non Vented
Reproduction fuel cap for 1967-71 Dodge & Plymouth A-Body models. Each cap is manufactured to correct factory specifications replicating the original in design, appearance, and fitment. This is a non-vented cap features a...
1970-74 E-Body Fuel Tank Mounting Straps ; Stainless Steel; with Hardware
Reproduction of the original fuel tank mounting straps designed and manufactured from long lasting stainless steel material for long lasting dependability. For use on 1970-74 E-Body models. Approximate strap measurement bend...
1968-76 Dodge, Plymouth A Body; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1968-76 Dodge and Plymouth A-Body models as listed below. Each strap is manufactured in quality stainless steel to original factory dimensions...
Reproduction of the original fuel tank mounting strap designed for use with 1968-1976 Dodge Dart, Dart Sport Plymouth Duster, Demon, Twister, Swinger, Barracuda, and Valiant models. Each strap is manufactured in quality...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1967 Dart, Barracuda, Valiant; Fuel Tank Mounting Strap; Stainless Steel; One Strap Required
Reproduction of the original fuel tank mounting strap designed for use with 1967 Dodge Dart, Plymouth Barracuda, and Valiant models. Each strap is manufactured in quality stainless steel with all correct contours for an...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction of the original fuel tank mounting strap designed for use with 1963-1966 Dodge Dart, Plymouth Barracuda, and Valiant models. Each strap is manufactured in quality stamped steel, galvanized and EDP coated for rust...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1967 Dart, Barracuda, Valiant; Fuel Tank Mounting Strap; EDP Coated Steel; One Strap Required
Reproduction of the original fuel tank mounting strap designed for use with 1967 Dodge Dart, Plymouth Barracuda, and Valiant models. Each strap is manufactured in quality stamped steel with all correct contours for an...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1971-72 Mopar Accelerator Pedal Pad ; A,B,C,E-Body
Reproduction of the original accelerator pedal pad designed for use on various Chrysler, Dodge and Plymouth A, B, C, and E-body models. This injection molded ABS pedal pad is an accurate reproduction of the original pad...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1964-74 Dodge, Plymouth; Fuel Tank Filler Neck Grommet; Various Models
Reproduction fuel filler neck grommet for various 1964-74 Dodge & Plymouth models. Eliminate vapor or fuel leaks by replacing the fuel filler neck grommet. Manufactured from OE materials for long lasting fit and funcionality....
Correct reproduction of the original fuel tank designed for with 1968-1970 Dart, Barracuda, Valiant, and Swinger models. This reproduction fuel tank is manufactured in stainless steel replicating the original Mopar tank...
1970 Plymouth Barracuda, Cuda; Fuel Tank; with One Side Vent; Stainless Steel; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1970 Plymouth Barracuda, and Cuda models. This reproduction fuel tank is manufactured in stainless steel replicating the original Mopar tank offering...
1964-66 Barracuda, Dart, Valiant; Niterne Fuel Tank; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1964-66 Dodge Dart, and Plymouth Barracuda and Valiant models. This reproduction fuel tank is manufactured in stamped NiTerne steel for rust and corrosion...
1971-72 Barracuda, Cuda; Fuel Tank; Nitern Steel; CR8E; 18 Gallon
This is a high quality replacement fuel tank for 1971-72 Barracuda models. Manufactured from authentic Ni-Terne steel to replicate the original appearance and fit, this tank is designed to install just like the factory unit....
1971-72 Cuda, Barracuda; Zinc Coated Fuel Tank; 18 Gallon
This is a high quality reproduction of the original fuel tank designed for use with 1971-72 Plymouth Barracuda and Cuda models. This fuel tank is manufactured to original specifications in zinc plated steel replicating the...
Correct reproduction of the original fuel tank designed for with 1968-1970 Dodge Dart, Plymouth Barracuda, Valiant models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy Zinc coating for rust...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
1968-70 Dodge Charger, 1967-68 Barracuda, 1967 GTX ; Quick-Fill Fuel Cap Trim Ring
Reproduction "Quick-Fill" or "Flip Top" fuel cap trim ring for 1968-70 Dodge Charger, 1967-68 Plymouth Barracuda, and 1967 GTX models. Each fuel cap trim ring is manufactured in die-cast zinc featuring a polished chrome...
1963-76 Dodge, Plymouth; A-Body; Fuel Tank Sending Unit ; 5/16" Outlet
After years of use, your fuel sending unit can wear out or stop working which can cause significant issues with your fuel gauge. Ensure you always know how much fuel you actually have in the tank by replacing your worn out...
1960-72 Dodge, Plymouth A-Body, 1963-64 B-Body; Fuel Tank Cap; Chrome; Non-Vented
Reproduction of the original fuel tank cap originally designed for use on 1960-66, 1971-72 Dodge and Plymouth A-Body, and 1963-64 B-Body models as listed. Each fuel tank cap is manufactured to correct factory specifications...
1970-74 Barracuda, Cuda; Fuel Tank Filler Neck; Zinc Plated
Reproduction of the often rusted or corroded fuel tank filler neck for 1970-74 Plymouth Barracuda, and Cuda models. Each fuel neck is manufactured to factory specifications replicating the original in design, appearance, and...
1970-74 Barracuda, Cuda, Challenger; Fuel Tank Filler Neck Seal
Reproduction fuel filler neck to trunk floor seals for 1970-74 E-Body models. Designed to keep out fumes and road debris, each seal attaches to the inside of the trunk floor and surrounds fuel filler neck. Manufactured in...
1970-74 Dodge, Plymouth E-Body; Standard Fuel Tank Sending Unit; with 3/8" Outlet ; 1/4" Return Line
After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...
1963-76 Dodge, Plymouth A-Body; Fuel Tank Sending Unit; 3/8" Outlet with 1/4" Fuel Return
After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...
1968-71 Dodge Plymouth; Fuel Filter, Vapor Separator; with 426, 440
Help prevent vapor lock the way the factory intended by installing the correct fuel filter/vapor separator on your 426 Hemi or 440 ci equipped vehicle. This part mounts near the fuel pump and is designed to filter the fuel...
1962-76 Dodge, Plymouth A, B, E Body; Fuel Tank Sender Lock Ring and Rubber Gasket
Reproduction of the original style fuel sending unit lock ring and gasket designed for use with various 1962-1976 Dodge and Plymouth models as listed. Install the sending unit on your vehicle with the quality replacement...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1973-74 Dodge, Plymouth; Accelerator Pedal Pad with Bezel and Hardware; Various Models
Reproduction of the original accelerator pedal pad, chrome trim and mnounting hardware designed for use on 1973 Mopar B,C, and E-Body models. Manufactured exactly as original including the correct grain texture for an...
1967-71 Dart, Barracuda, Valiant; Fuel Cap; Non Vented; Primer; Non EEC / ECS
Reproduction fuel cap for 1967-71 Dodge & Plymouth A-Body models. Each cap is manufactured to correct factory specifications replicating the original in design, appearance, and fitment. This is a non-vented cap comes that...
1963-74 Dodge, Plymouth; Fuel Sending Unit; with 1/2" Outlet; 1/4" Fuel Return; Stainless Steel
Reproduction of the original fuel sending unit designed for use with 1963-74 Dodge and Plymouth A-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause...
1967-69 Dart, Swinger, Barracuda, Valiant; Fuel Tank Filler Neck Seal
Reproduction fuel filler neck to trunk floor seals for 1967-69 Barracuda, Dart, Valiant and 1969 Swinger models. Designed to keep out fumes and road debris that could enter the fuel area, each seal attaches to the inside of...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Reproduction of the original fuel tank mounting strap designed for use with 1963-1966 Dodge Dart, Plymouth Barracuda, and Valiant models. Each strap is manufactured in quality stainless steel with all correct contours for an...
1960-76 Mopar Fuel Tank Mounting Lock Nuts ; Pair
Reproduction fuel tank mounting lock nuts for various 1960-76 Mopar models. Sold in pairs. Zinc plated, 3/8" - 16, 9/16" outer. Fuel tank mounting studs (J bolts) sold separately. Use part# MM8271 fuel tank mounting studs....