Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
1970-76 Dodge, Plymouth, A, B, E Body; Door Lock Striker Bolt; 2 Door; Each
Correct reproduction of the original door lock striker bolt designed for use on all 1970-76 Dodge and Plymouth A, B, and E body 2 door models as listed. The door lock striker bolt is manufactured to correct factory dimensions...
1970-74 Plymouth Barracuda, Cuda; Outer Door Handle Set; with Gaskets; RH & LH; Pair
Reproduction of the original outer door handles designed for use with 1970-74 Plymouth Barracuda and Cuda models. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome plating replicating the...
1970 Plymouth Barracuda / "Cuda Front Door Window Regulator, LH
Reproduction of the original front door window regulator designed for use on 1970 Plymouth Barracuda and Cuda models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for use...
1971-74 Barracuda / "Cuda Front Door Window Regulator, RH
Reproduction of the original front door window regulator designed for use on 1971-1974 Plymouth Barracuda and Cuda models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for...
1967-70 Dodge, Plymouth A, B-Body; Front Outer Door Handle Set; with Black Buttons
Reproduction of the original outer door handles designed for use with various 1967-1970 Dodge and Plymouth A, B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished...
1963-66 Dart, Valiant, Barracuda; Outer Door Handle Set; with Push Buttons; RH and LH
Reproduction of the original style outer door handles designed for use with 1963-66 Dodge Dart, and Plymouth Valiant, Barracuda models. Manufactured in die-cast zinc to factory specifications. Includes handles, push buttont,...
1968 Dart, Barracuda, Valiant; Front Door Latch; Passenger Side
Reproduction of the original door latch assembly designed for use with 1968 Dodge and Plymouth Dart, Barracuda, and Valiant models. Each door latch is manufactured to factory specifications using quality stamped steel to...
1966-74 Dodge, Plymouth A & B Body; Lower Front Door Hinge; LH; Driver Side; Various Models
This reproduction door hinge is designed for use on a wide range of 1966-1974 Dodge and Plymouth A and B Body vehicles. The heavy factory doors on these Mopar models often caused premature hinge wear, leading to sagging...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1970-74 Barracuda, Cuda, Challenger; Upper Door Hinge; LH; EDP Coated
Reproduction of the original upper door hinge designed for use with 1970-74 Dodge, Plymouth E-Body models. Manufactured in quality stamped steel replicating the origina l in quality and design. Includes correct mounting...
1970-74 Barracuda, Cuda, Challenger; Lower Door Hinge; RH
Reproduction lower door hinge for 1970-74 Dodge, Plymouth E-Body, Barracuda, 'Cuda, and Challenger models. Manufactured in quality stamped steel replicating the original in quality and design. Features correct mounting holes...
1967-74 Dodge, Plymouth A-Body; Upper Front Door Hinge; RH; Passenger Side
Reproduction of the original door hinge for various Dodge and Plymouth A-Body models. The front doors on 1967-74 Mopar A-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Reproduction flat style phillips head machine screws for latches and strikers on various classic makes and models. Fits the door striker on 1947-51 Chevrolet and GMC truck models. Fits the door latch on various 1966-74 Dodge...
1962-65 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set
Reproduction of the original door hinges for 1962-65 Dodge or Plymouth B-Body models. Each hinge is manufactured to factory specifications ensuring a quality appearance and fit. Includes 2 upper and 2 lower door hinges, ready...
1967-74 Dodge/Plymouth; A-Body; Door Hinge Kit; Upper and Lower; RH and LH Sides; 4-Piece Kit
Reproduction of the original door hinges designed for use on various Dodge and Plymouth A-Body models. The front doors on 1967-74 Mopar A-Body models were heavy and hard on the original door hinges. Each door hinge is...
1970-74 Door Hinge Set Mopar E-Body 4 Piece
The doors on 1970-74 Mopar E-Body models were extremely heavy and hard on original hinges. This new 4-piece hinge set will help with door alignment and ensure your doors open and close the way the factory intended. Sold only...
1971-74 Barracuda / "Cuda Front Door Window Regulator, LH
Reproduction of the original front door window regulator designed for use on 1971-1974 Plymouth Barracuda and Cuda models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for...
1970 Plymouth Barracuda / "Cuda Front Door Window Regulator, RH
Reproduction of the original front door window regulator designed for use on 1970 Plymouth Barracuda and Cuda models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for use...
1969-2002 Nylon Rod Clip, Fits 5/32" Rod Diameter; 1/4" Hole Size; LH Driver Side; Varius Models
Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...
1968 Dart, Barracuda, Valiant; Front Door Latch; LH Driver Side
Reproduction door latch assembly for 1968 Dodge and Plymouth Dart, Barracuda, and Valiant models. Each door latch is manufactured to factory specifications using quality stamped steel to replicate the original latch in design...
1966-74 Dodge, Plymouth A & B Body; Lower Front Door Hinge; RH; Passenger Side; Various Models
This reproduction door hinge is designed for use on a wide range of 1966-1974 Dodge and Plymouth A and B Body vehicles. The heavy factory doors on these Mopar models often caused premature hinge wear, leading to sagging...
1968-81 GM; Door Glass Roller Washer; Various Models
Reproduction plastic washer that pushes through the door glass on various 1968-81 GM models. Exact reproduction of the original door glass roller washer. Sold individually. Use as required. Replaces OE # 4491087.
1970-74 Barracuda, Cuda, Challenger; Lower Door Hinge; LH
Reproduction lower door hinge for 1970-74 Dodge, Plymouth E-Body, Barracuda, 'Cuda, and Challenger models. Manufactured in quality stamped steel replicating the original in quality and design. Features correct mounting holes...
1967-74 Dodge, Plymouth A-Body; Upper Front Door Hinge; LH; Drivers Side
Reproduction of the original door hinge for various Dodge and Plymouth A-Body models. The front doors on 1967-74 Mopar A-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to...
1970-74 Barracuda, Cuda, Challenger; Upper Door Hinge; RH; EDP Coated
Reproduction of the original upper door hinge designed for use with 1970-74 Dodge, Plymouth E-Body models. Manufactured in quality stamped steel replicating the origina l in quality and design. Includes correct mounting...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 2.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1969-77 Chrysler, Dodge, Plymouth; Power Window Switch; 4 Window; Concave Buttons
Reproduction of the original power window switch designed for use on 1969-77 Mopar Dodge, Plymouth and Chrysler models designed to install in the drivers side front door. This switch is manufactured with original style...
1966-74 Dodge, Plymouth; A, B, E Body; Lower Door Hinge Spring; Each
When you are rebuilding your door hinges don't stop at pins and bushings, make sure you replace those worn out springs at the same time. Replace the worn out hinge spring with this reproduction designed to fit and function...
1964-98 GM; Door Lock Striker Bolt Shim - 4.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1970-74 Challenger, Barracuda, Cuda; Lower Door Hinge Pillar; LH; EDP Coated
Reproduction of the original lower door hinge pillar for use with 1970-74 Dodge and Plymouth E body models. Each lower door hinge pillar is manufactured in stamped steel to original factory specifications featuring correct...
1970-74 Challenger, Barracuda, Cuda; Lower Door Hinge Pillar; RH; EDP Coated
Reproduction of the original lower door hinge pillar for use with 1970-74 Dodge and Plymouth E body models. Each lower door hinge pillar is manufactured in stamped steel to original factory specifications featuring correct...
1966-76 Dodge, Plymouth; A, B, E Body; Door Hinge Repair Kit
Replacement door hinge pin and bushing set for various 1966-76 Dodge and Plymouth A, B and E-Body models. The components in this kit will restore proper door alignment and provide for quieter operation when opening and...
1968-76 Dodge, Plymouth A-Body; Door Lock Ferrules; Pair
Reproduction door lock knob ferrules for 1968-1976 Mopar A-body models. Each pair of ferrules are manufactured in injection molded ABS that replicates the original in quality and design. The ferrules snap into place on the...
1970-72 Barracuda, Cuda, Challenger; Door Window Hardware Set; 26 Piece Set
Replace damaged or missing original door window components with this comprehensive hardware set designed to replace old or worn out door window hardware. This kit is designed for use on 1970-72 Mopar E body models. Replace...
1973-74 Front Door Window Hardware Set ; E-Body; 22 Piece Set
Reproduction of the original front door hardware designed to replace the won out or damaged originals for 1973-74 Mopar E body models. This 22 piece hardware set services the inner door components associated with the proper...
1970-74 Mopar Quarter Window Roller Set ; E-Body ; 6 piece set
Reproduction of the original quarter window rollers designed for use on 1970-74 Mopar E-Body models. Each set includes all the necessary hardware and rollers to repair the both RH and LH rear quarter windows. Includes 2...
1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each
This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...
1970-73 Mopar Door Glass Guide; E-Body
OER reproduction of the original door window glass guide designed for use on 1970-73 Dodge/Plymouth E-Body models. Manufactured in quality injection molded ABS plastic to factory dimensions. This glass guide installs on the...