OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...
1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER
Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...
1964-74 Dodge/Plymouth A, B, E-Body; Trunk Weatherstrip; With Y Profile
Reproduction of the original trunk weatherstrip designed for use on various 1964-1973 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a Y profile configuration matching the original in fit and appearance....
1962-78 Dodge/Plymouth A, B & E-Body; Hood Adjust Bumper
Factory style replacement hood adjust bumper for 1962-78 A, B and E-Body models. Designed to factory specifications and manufactured in rubber to correctly replace the hood adjust bumper. This bumper features a 1-1/4" outer...
1970-74 Challenger, Barracuda, Cuda; Door Frame Weatherstrip, with End Caps, Pair; OER
Reproduction of the original style door frame weatherstripping designed for use on 1970-74 E body Mopar models. Designed to factory specifications and manufactured in quality EPDM rubber to correctly replace the door seal...
1968-70 Dodge. Plymouth B-Body; Roof Rail Weatherstrip, 2 Door Hardtop, Pair
Correct reproduction of the original roof rail weatherstrips designed for use on 1968-70 Mopar B body models. The roof rail seals run along the top roof line of the car and seal the door glass at the roof when rolled up....
1967-72 Dart, Barracuda, Valiant; Vent Window Weatherstrip Seals; 2 Door Coupe; Pair
Reproduction of the original vent window weatherstrip designed for use on 1967-72 Mopar A body 2 door coupe models. Keep out moisture and reduce cabin noise by replacing the cracked original vent window weatherstrip....
1960-76 Dodge, Plymouth A, B, C-Body; Trunk Weatherstrip; OER
Reproduction of the original rear trunk weatherstrip designed to fit a variety of 1960-76 Chrysler, Dodge, and Plymouth. Each trunk weatherstrip is manufactured in durable EPDM rubber material in the correct configuration...
1973-76 Dart, Swinger, Duster, Scamp; Door Frame Weatherstrip, 2 door; Hardtop; Pair; OER
Reproduction door frame weatherstrip for 1973-76 Dodge and Plymouth A-body models. This replacement door frame weatherstrip is designed to factory specifications and manufactured in rubber to correctly replace your brittle,...
1968-70 Plymouth B-Body; Rubber Bumper Set
Factory-style reproduction of the original rubber bumper and stopper set designed for use with 1968-70 Plymouth B Body models. Each bumper is manufactured to the correct configuration with quality EPDM rubber. Rubber Bumper...
1971-74 Charger, GTX, Road Runner, Satellite; Roof Rail Weatherstrip; 2 Door Hardtop; Pair
Correct reproduction of the original roof rail weatherstrips designed for use on 1971-74 Mopar B body 2 door hardtop models. The roof rail seal runs along the top roof line of the car and seals the door glass at the roof....
1966-67 Charge, Coronet, GTX, Belvedere; Door Frame Weatherstrip; 2 door; Hardtop, Convertible; Pair
Reproduction of the original door frame weatherstripping designed for use on 1966-67 Dodge and Plymouth B-body 2-door hardtop and convertible models. This replacement door seal weatherstrip is designed to factory...
1971-76 Dodge, Plymouth A, B, E Body; Trunk Weatherstrip; with D Profile
Reproduction of the original trunk weatherstrip designed for use on various 1971-76 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a D profile configuration matching the original in fit and appearance....
1970 Dodge, Plymouth E-Body; Quarter Window Seals; Coupe, Convertible; Pair
Reproduction of the original vertical quarter glass weatherstrip seals designed for use on 1970 Mopar E-Body 2-door hardtop or convertible models. Manufactured to factory specifications with quality EPDM rubber. Features...
1970 Dodge/Plymouth B-Body; Trunk Weatherstrip Seal
Reproduction of the original trunk weatherstripping designed to fit a variety of 1970 Dodge and Plymouth B-Body models. Manufactured in durable rubber material, each weatherstrip features a proper fit to seal the elements...
1966-70 Mopar Door Jamb Seal Screw Set ; 14 Piece Set ; B-Body
Reproduction of the original door jamb and door end seal screws for 1966-70 Mopar B-Body vehicles. These phillips head screws are black-oxide coated and designed to accurately replace the screws in the door jamb seals and the...
1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)
Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...
1972-74 Plymouth A-Body Rubber Bumper Set
Factory-style reproduction rubber bumper set for 1972-74 Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove b ox bumpers Trunk bumpers Fuel door...
1971 Dodge, Plymouth B-Body; Rubber Bumper Set
Reproduction rubber bumpers and stoppers for various 1971 Dodge and Plymouth B-Body models. Each bumper set is manufactured to the correct configuration with quality EPDM rubber replicating the originals for an authentic...
1937-87 GM; Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required. Precision-molded from quality EPDM rubber to replicate the original plug size, shape, and material, this...
1967-74 Chrysler, Dodge, Plymouth; A, B, C Body; Front Door Glass Channel Seals; with Clips; Pair
Reproduction front door glass channels for 1967-74 Dodge and Plymouth A-Body, and 1966-70 B-Body and C-Body models as listed. These front door glass seals attach to the front of each door window in order to allow the glass to...
1962-70 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1962-70 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural
This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...
1968-70 Dodge, Plymouth B Body; Front Windshield Weatherstrip; 2 Door Hardtop, Sedan
Reproduction of the original windshield weatherstrip designed for 1968-70 Dodge and Plymouth Charger, Coronet, Belvedere, GTX, Road Runner, and Satellite (B-Body) 2/door, and sedan model. Often either sun-rotted or damaged...
1968-70 Dodge, Plymouth B-Body; Door Seal Weatherstrip, 2 Door, Hardtop, Pair; OER
Reproduction of the original style door frame weatherstripping designed for use on 1968-70 Dodge and Plymouth 2-door hardtop models. Each weatherstrip is manufactured and designed to factory specifications and manufactured in...
1967-72 Dart, Barracuda, Duster, Valiant; Door Frame Weatherstrip, 2 Door Coupe, Hardtop, Pair
Reproduction door frame weatherstrips seals for 1967-72 Dodge and Plymouth A-body 2-door models. Each door weatherstrip seal is manufactured from premium quality EPDM molded rubber replicating the original in design and...
1968-70 Charger, Coronet, Road Runner; Door Seal End Caps, 2 Door Hardtop, Convertible, Pair
Factory-style replacement door seal end caps designed for use on 1968-70 Dodge and Plymouth B-Body 2 door hardtop and convertible models. These precision molded end caps mount to the door edge with screws and neatly finish...
1970-74 Dodge/Plymouth E-Body; Door Jamb Seals, Pair
Reproduction of the original door jamb rubber U shaped rubber seals designed for use on 1970-74 Mopar E-Body 2 door hardtop models. Each seal mounts on the rear top edge of the quarter panel door jamb area at the edge of the...
1967-74 Dodge/Plymouth A-Body; Rubber Bumper Set
Factory-style reproduction rubber bumper set for various 1967-74 Dodge & Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove box bumpers Trunk...
1968-71 Mopar B-Body Hood Side Stop Rubber Bumper
Factory-style replacement hood side stop bumper for various 1968-71 Mopar B-Body models including Charger, Coronet, Belvedere, Road Runner, Satellite and Superbird models. Designed to factory specifications to correctly...
1970-74 Challenger, Barracuda, Cuda E-Body; Quarter Window Vertical Seals; Coupe & Convertible; Pair
Reproduction of the original vertical quarter glass weatherstrip seals designed for 1971-74 Mopar E-Body hardtop (coupe), or convertible models. Manufactured to factory specifications with proper contours to correctly replace...
1971-74; Charger, GTX, Road Runner; Door Frame Weatherstrip Seal; 2 Door; Hardtop; Pair
Reproduction of the original door frame weatherstripping designed for use on 1971-74 Dodge Charger, Plymouth Satellite, and Road Runner 2-door hardtop models. This replacement door seal weatherstrip is designed to factory...
1968-74 Dodge/Plymouth A, B & E-Body; Hood Side/Trunk Rubber Bumper; 7/8" X 7/8"
Factory-style replacement hood side stop and trunk bumper for various 1968-74 Mopar A, B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper. Sold individually.
1966-67 Charger, Coronet, Belvedere, Road Runner; Roof Rail Weatherstrip; 2 Door Hardtop; Pair
Reproduction of the original roof rail weatherstip designed for use on 1966-67 Mopar B-body models. Each weatherstrip is manufactured with quality EPDM rubber to factory specifications. Installs along the roof line and down...
1968-69 Belvedere, GTX, Road Runner, Satellite; Trunk Seal Weatherstrip
Reproduction of the original trunk weatherstrip designed for use on 1968-69 Plymouth B-body models. Each rubber strip is manufactured with correctly configured extruded rubber. The weatherstrip is designed to fit the groove...
1962-74 Dodge/Plymouth B/E-Body; Hood Side/Trunk Rubber Bumper
Factory-style replacement hood side stop and trunk bumper for various 1962-65 Mopar B-Body models and 1968-74 B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper....
1971-79 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each
Factory-style reproduction of the rubber door bumper that mounts to the door on 1972-79 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...
1971 Dodge/Plymouth A-Body; Rubber Bumper Set
Factory-style reproduction rubber bumper set for various 1971 Dodge & Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove box bumpers Trunk bumpers...
1971-74 Dodge/Plymouth A-Body; Hood Side Rubber Bumper
OER reproduction hood side rubber bumper for the various 1971-74 Dodge and Plymouth A-Body models listed. Designed to factory specifications to correctly replace the hood stop bumper. Sold individually. Applications: 1971-74...
1966-67 Charger, Coronet, Belvedere, GTX, Satellite; Hood Side Rubber Bumper; Each
Reproduction of the original factory hood side bumper designed for use with various 1966-67 Dodge Charger, Coronet and Plymouth Belvedere, GTX, and Satellite models as listed. Manufactured to correct specifications using...
1963-66 Mopar A-Body - Door Jamb Seal Screw Set - 6 Pieces
Reproduction door jamb and door end seal screws for 1963-66 A-Body cars. These phillips head screws are black-oxide coated and designed to accurately replace the screws in the door jamb seals and the door seal end caps....
Staple For Inner Fender Splash Apron, 1/2 inch
Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
1967-72 Dart, Barracuda, Valiant, Scamp; Roof Rail Weatherstrip; 2 Door Hardtop; Pair
Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...
1968-70 Dodge, Plymouth B-Body Door Window Weatherstrip Plugs, Pair
Reproduction of the door window weatherstrip rubber weatherstrip plugs designed for use on 1968-70 Mopar B Body models. This is the fuzzy-coated piece that plugs into the inner door at the end of the window felt weatherstrip....
1970-74 Challenger, Barracuda, Cuda;Molded Door Seal End Cap, Pair
Factory-style replacement door seal end caps designed for use on 1970-74 Dodge and Plymouth E-Body hardtop and convertible models. This end cap is mounted to the door edge with screws and caps off the edge of the door...
1968 Coronet, Charger, Road Runner, Satellite; Hood To Radiator Support Seal; with Hardware
Reproduction hood to radiator seal for 1968 Dodge and Plymouth B Body models. This replacement hood to radiator seal is manufactured to factory specifications to replace your existing warped or damaged original. Measures 52"...
Sealstrip Glass Setting Tape; 10 Foot Roll; 1/32" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1963-66 Dodge/Plymouth A-Body; Hood Side Rubber Bumper; Each
OER reproduction of the original hood side rubber bumper designed for various 1963-66 Mopar A-Body models. Each rubber stopper is designed to factory specifications to correctly replace the hood side stop bumper. Sold...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1968-70 Dodge, Plymouth B-Body; Door Jamb Weatherstrip Seals, 2 Door, Hardtop; Pair
Reproduction of the original door jamb rubber U shaped rubber seals designed for use on 1968-70 Dodge and Plymouth B-Body 2 door hardtop models. Each seal mounts on the rear top edge of the quarter panel door jamb area at the...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1967-70 Charger, Coronet, GTX, Road Runner; Quarter Window Glass Vertical Seal ; Pair
Factory-style reproduction vertical quarter window glass seals for 1967-70 Dodge, and Plymouth A and B-Body models. Manufactured to exact factory specifications including proper contours to correctly replace the vertical rear...
1963-91 GM, Mopar; Chrome Windshield Seal Lockstrip; 16" 10" Long x 1/2" Wide
Superb quality windshield lockstrip that replaces the old and worn out originals on various GM and Mopar vehicles. Produced with high grade rubber for long lasting dependability, each lock strip is designed to replicate the...
1971-74 Barracuda, Cuda, Challenger; Roof Rail Weatherstrip ; 2 Door; Coupe; Pair; OER
Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...
Door, Vent, Quarter Glass; Sealstrip Glass Setting Tape;10 Foot Roll; 1/16" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...
1970; Dodge/Plymouth E-Body; Roof Rail Weatherstrip Seal; Pair
Reproduction of the original style roof rail weatherstrip that installs along the upper roof rail section from the pillar to the rear window along the roof line. Each weatherstrip is manufactured with quality E.D.P.M rubber...
1966-67 Dodge, Plymouth B-Body; Molded Door Seal End Cap, 2 Door Hardtop, Convertible
Reproduction of the original factory-style door seal end caps designed for use on 1966-67 Dodge and Plymouth B-Body 2 door hardtop and convertible models. The end caps are mounted to the door edge with screws and cap off the...
1967-76 Dodge, Plymouth A-Body; Door Jamb U Shape Rubber Weatherstrip Seals; 2 Door
Reproduction door jamb U shape rubber seal for 1967-76 Mopar A body models except Dart Sport, Duster, or Demon models. Each seal is manufactured to correct specifications and includes a galvanized steel core for durability...
Sealstrip Glass Setting Tape ; 10 Foot Roll ; 3/64" Tape Thickness
Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...