1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1968-92 GM, Chrysler; Door Jamb Switch; 2 Terminal
Replacement door jamb switch for use on various 1968-92 GM models. This 2 terminal switch is manufactured to fit and function as original and specifically designed for the models listed below. Replacing this switch will help...
Reproduction Chrysler, Dodge, and Plymouth turn signal switch assembly to replace the worn out or non-functioning original Mopar unit. Manufactured to exact specifications, each switch features a correctly constructed...
Correct OER® reproduction of the Sparton horns designed for various 1967-71 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...
1966-74 Chrysler, Dodge, Plymouth; Starter Relay
Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...
1966-73 Chrysler, Dodge, Plymouth; Battery Hold Down Set; Various Models
Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....
1969-70 Dodge, Plymouth B-Body; Positive Battery Cable - Big Block; with 1-Piece Molded Starter Lug
Reproduction battery cables for 1969-70 Dodge and Plymouth big block models with 1-piece molded starter lug. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original...
1970-74 Dodge, Plymouth; Positive Battery Cable; A/B/E-Body Models; 43-1/2" overall length
Reproduction of the original positive battery cable for use with 1970-74 Dodge and Plymouth models. Each cable is designed and manufactured to replicate the original in appearance and lead length. The positive cable assembly...
1965-74 AMC, Dodge, Plymouth; Gauge Cluster Voltage Limiter; Various Applications
This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it's required when using...
1971 Mopar B/E-Body 440 Six-Pack - Engine Wiring Harness - Stock Style Breaker Point Ignition
Replacement complete engine wiring harness which are ready to install and feature correct colored wires and correct style connectors, making installation as easy as possible. Replacement harnesses include connections for the...
1968-70 Plymouth Road Runner; Horn Assembly; with 3-3/8" Bracket; Purple
We all remember the iconic "Beep-Beep" horn sound made by the famous "Road Runner" cartoon. Now you can restore your classic Road Runner's voice with this authentic reproduction of the original horn assembly for 1968-70...
1971-79 Plymouth Road Runner; Horn Assembly; Purple; with 1-1/2" Bracket
We all remember the iconic "Beep-Beep" horn sound made by the famous "Road Runner" cartoon. Now you can restore your classic Road Runner's voice with this authentic reproduction of the original horn assembly for 1971-75...
Reproduction Chrysler, Dodge & Plymouth turn signal switch assembly to replace the worn out or non functional original. Manufactured to exact specifications, each switch features injection molded construction with correctly...
1971-79 Plymouth Road Runner; Horn Assembly; with 1-1/2" Bracket; Black
We all remember the iconic "Beep-Beep" horn sound made by the famous "Road Runner" cartoon. Now you can restore your classic Road Runner's voice with this authentic reproduction of the original horn assembly for 1973-75...
1972-74 Dodge; Plymouth; B & E-Body; Battery Hold Down Set
Replacement battery mounting hardware for 1972-74 Dodge and Plymouth models. Replace damaged or missing components with quality replacement parts. Each set will include all necessary hardware to secure the battery to the...
1966-69 Dodge, Plymouth A, B, E Body; Starter Relay; with Manual Transmission
Reprpduction of the starter relay for use with all 1966-69 Dodge and plymouth models with a manual transmission. This starter relay will replace the old, or worn out original adding years of reliable service. Mounts on the...
Delco Energizer R89 Side Post Battery Topper
Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat top...
Cloth Wiring Harness Tape; 1" x 100 foot
If you want an OEM quality and appearance for your original or reproduction wiring, this specially manufactured black! This adhesive back tape will allow you to re-wrap your existing harness or replace tape which may have...
Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...
Top Post Battery Cable Terminal
Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...
OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp
The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...
1963-66 Dart, Valiant, Barracuda; Battery Tray; EDP Coated
Reproduction of the original battery tray designed for use with 1963-66 Dodge and Plymouth A-body models. Each battery tray is manufactured in stamped steel to original factory specifications featuring correct contours for an...
Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...
1970-74 Challenger, Barracuda, Cuda; Light Bar Wiring Harness; with Rallye Dash
Reproduction of the original dash bar wiring harness required to light the instrument gauge cluster on 1970-74 Dodge Challenger, Plymouth Barracuda, and Cuda models with a Rallye dash. Features four lamp sockets.
1966; Dodge, Plymouth B-Body; Engine & Forward Light Harness Fusible Link; Each
Reproduction fusible link. Manufactured with the same high quality materials used for our wiring harnesses because these fusible links are included as a part of the harnesses. If your harness needs a new fusible link, these...
1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat
Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...
Starter Bolt 3/8"-16 X 4-11/16"
Replacement starter bolt for models that require a 3/8"-16 x 4-11/16" bolt.
Dodge, Plymouth A, B, E Body; Battery Hold Down J-Bolt; 7"
Reproduction battery hold down J bolt for various Dodge and Plymouth models. Each bolt is a reproduction of the original style battery hold down bolt. This is a 7" bolt. Refer to part number # 2074089 for 8.5" bolt.
1956-96 AMC, Chrysler, GM, Ford; Wiring Connector; 2-Terminal; Female; Various Applications
Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...
1967-74 Dodge, Plymouth A, B, E; Battery Hold Down J-Bolt; 8.5"
Exact reproduction of the original battery hold down J bolt designed for use with 1967-74 Dodge and Plymouth A, B, and E body models as listed. Measures 8.5". Refer to part number # 2534814 for 7" bolt.
1969 Dodge, Plymouth B-Body; Under Dash Wire Harness; with Oil Gauge Provision
Reproduction of the original complete under-dash harness for use with 1969 Dodge and Plymouth B-body models. Each harness features correct color wires, factory style connectors, and is wrapped in non-adhesive black vinyl wrap...
Front Fender Wire Harness Straps; 2-1/4" Long; Black Nylon
A hot exhaust manifold can cause serious damage to your electrical system. If not properly fastened, the wiring harness leading to your alternator/generator or other wiring harnesses could fall into an open area between the...
Correct OER® reproduction of the Sparton horns designed for various 1968-74 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...
1963-66 Dodge, Plymouth A/B-Body; Turn Signal Switch; without Tilt; 7 Wire Switch
Reproduction turn signal switch for 1963-66 Mopar A and B-Body models without tilt steering wheel. Each turn signal switch replicates the original allowing a complete replacement of the old or non-working original. Includes...
Reproduction of the original complete engine wiring harness for use with 1970 Dodge and Plymouth B Body models. This harness is manufactured to the correct factory specifications and is ready to install. Features correct...
1970-76 Dodge; Plymouth; 1970-71 B & E-Body; 1970-76 A-Body; Battery Hold Down Set
Reproduction of the original battery mounting hold down set designed for various 1970-1976 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction. Each...
1967-71 Dodge, Plymouth; Turn Signal Switch; w/o Tilt ; 7 Wire Switch; A, B, E-Body; 1st Design
Reproduction turn signal switch for 1967-71 Mopar A, B & E-Body models without tilt steering wheel. This switch is manufactured to exact factory specifications and comes with metal connectors attached to the ends of the wires...
1970-72 Dodge, Plymouth; B/E-Body; Negative Battery Cable; 23-1/2"; 383ci, 440ci, 400, 440-6P
Reproduction negative battery cable for 1970-72 Dodge and Plymouth models for B & E body models. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original and will...
1966-69 Dodge, Plymouth B-Body; Battery Tray; EDP Coated
Reproduction of the original battery tray designed for use on various 1966-1969 Dodge and Plymouth B-Body models. Manufactured in quality stamped steel to Mopar specifications. Features correct mounting points and pre-drilled...
1968-70 Plymouth Road Runner; Horn Assembly; with 3-3/8" Bracket; Black
We all remember the iconic "Beep-Beep" horn sound made by the famous "Road Runner" cartoon. Now you can restore your classic Road Runner's voice with this authentic reproduction of the original horn assembly for 1968-70...
Reproduction of the original battery tray brace designed for 1966 & 1971-72 B-Body, and 1970-74 E-Body Dodge and Plymouth models as listed below. Each bracket is manufactured in stamped steel to original specifications and...
1967-68 Dodge, Plymouth; B Body; Back-Up Lamp Wiring Harness
Reproduction of the original back-up lamp harness designed for use on 1967-68 Mopar B-body and 1968 A body models. This back-up lamp harness connects the bulkhead to the transmission backup switch. Other connections may vary...
1967-69 Dart, Barracuda, Valiant; Wire Harness Strap Set; 6 Piece Set
Reproduction wire strap set for 1967-69 Dodge Dart, Plymouth Barracuda, and Valiant models. These straps are used to retain wire harnesses at various locations under the hood. Manufactured from injection molded plastic with...
OER Smart Charger 800; Battery Charger And Maintainer; 12V; 0.8 Amp
The OER Smart Charger 800 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell) batteries....
1962-65 Dodge, Plymouth; Starter Relay; with Automatic Transmission
Replacement of the original starter relay for use with 1962-65 Dodge or Plymouth models with automatic transmissions. This relay mounts on the inner fender well near the battery.
1961-65 Dodge, Plymouth; A, B-Body Starter Relay; Manual Transmission
Replacement starter relay for various 1961-65 Dodge and Plymouth A, B-Body models with manual transmission. Replaces old, worn out, or missing original starter relays on the models listed. Designed to mount on the inner...
Reproduction ignition switch for 1979-89 Mopar R, M & J-Body models & truck models with tilt steering wheel. Each switch is produced in stamped steel with an eleven-blade, plastic, rectangular connector and steel spring...
3/8"-16 X 3-5/8" Starter Mount Bolt
This replacement shouldered medium length bolt commonly used to secure starters with a cast iron staggered pattern nose to a big block engine. Two bolts required per vehicle.
1973-1997 GM; 2 Terminal Door Jamb Switch; Various Models
Replacement door jamb switch for use on various GM models with two terminals for the drivers side. This switch is a GM service replacement part, which may differ slightly from the original in appearance but will fit and...
Headlamp Switch; 3 Position; Universal Fit
Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...
1975-99 Chrysler, Dodge, Plymouth; Headlight Switch; 9-Terminal; with Ceramic Style Rheostat
Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with an older style ceramic rheostat with metal spring contact (rather than the newer printed circuit board style rheostat) for...
1977-87 Chrysler, Dodge, Plymouth; Ignition Switch; 9 Blade Terminals; Various Applications
Reproduction ignition switch with 9 blade-style terminals for a variety of 1977-87 Chrysler, Plymouth, and Dodge car and truck models. Authentic connectors will match the plugs and wiring ends on your original wiring harness....
Reproduction ignition switch for 1979-89 Mopar R, M & J-Body models & truck models without tilt steering wheel. Each switch is produced in stamped steel with an eleven-blade, plastic, rectangular connector and steel spring...
1980-15 4-Terminal Make & Break Miscellaneous Relay
Reproducion 4 terminal make and break relay used for various functions such as lighting, horns on a multitude of vehicles from 1980-2015. This 4 terminal relay is also popular in the aftermarket for lights, light bars, vacuum...
1960-84; GM, Chrysler, Dodge, Plymouth; Door Jamb Switch; Single Terminal; Each
Replacement single terminal door jamb switch designed for use on various models. Replace the old, damaged or non working door jamb switch with this quality service replacement. The door jamb switch will get your interior dome...
Heater Hose Clip for Inner Fender Skirt; Various GM Applications
This hose clip is designed to secure a pair of heater hoses to the inner fender skirt to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. This heater hose clip was original equipment on...
1955-90 AMC, Chrysler, GM, Ford; Brake Lamp Switch; with 2 Terminals; w/o Cruise Control;
Reproduction of the original brake light switch designed for use with various 1955-1990 AMC, Chrysler, Dodge, Plymouth, General Motors, and Ford models as listed below. Activated by the brake pedal arm, this switch causes the...
1969-77 Chrysler, Dodge, Plymouth; Power Window Switch; 4 Window; Concave Buttons
Reproduction of the original power window switch designed for use on 1969-77 Mopar Dodge, Plymouth and Chrysler models designed to install in the drivers side front door. This switch is manufactured with original style...
1977-78 Chrysler, Dodge, Plymouth; Power Window Switch; 4 Button; with Convex Buttons
Reproduction of the original power window switch designed for use on 1977-78 Mopar Dodge, Plymouth and Chrysler models designed to replace the 4-button switch on the drivers door. This switch is manufactured with a Convex...
1959-84 Chrysler, Dodge, Plymouth; A, B & E-Body; Headlamp Dimmer Switch; Floor Mount
Reproduction headlamp dimmer switch for a wide variety of Chrysler, AMC, and other models. Flickering or non-functional headlamps could be the result of a burned out dimmer switch. Headlamp dimmer switches allow the driver to...