Reproduction of the original outer door handles designed for use with 1971-72 Dodge and Plymouth B-Body models. Replaces pitted, worn or inoperative door handle assemblies. These door handles are truly the finest...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1968-70 Mopar B-Body (Except Charger); Glass Set; Clear; Hardtop
This comprehensive glass set for 1968-70 Dodge and Plymouth 2 door hardtop models (except Dodge Charger) features CLEAR (untinted) glass without date coding or original markings. Set includes: Windshield LH and RH Vent Glass...
1973-74 Dart Sport//Duster; Glass Set; Clear
This comprehensive glass set for 1973-74 Dodge Dart Sport / Plymouth Duster 2 door coupe models features CLEAR (untinted) glass without date coding or original markings. Set includes: Windshield LH and RH 5 hole* Door Glass...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2-Door Hardtop, Coupe; Tinted
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1967-69 Barracuda; Hardtop / Notchback; Back Glass; Tinted
Replace your pitted, scratched or broken original rear window glass with this new reproduction. Each glass is professionally packed with extra care to prevent damage during shipping. Plymouth Applications: 1967-69 Barracuda...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2 Door Hardtop, Coupe; Clear
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop models. Replace your missing, scratched or broken original vent glass...
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade for 2nd design 1955 models and all 1956-59 Chevrolet and GMC truck models. Also correct as a replacement for a wide range of other makes and models, including 1955-57 GM passenger models...
1962 Dodge Dart / Plymouth Fury / Sport Fury; Convertible Top; Pinpoint; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1963 Dodge/Plymouth; B-Body; Hardtop/Sedan; Back Glass; Tinted
Replace your pitted, scratched or broken original back window glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by...
1962 Dodge Dart / Plymouth Fury / Sport Fury; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1964-65 Dodge, Plymouth B-Body; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Tinted Glass; Crush Vinyl; Black
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you receive...
1966-67 Mopar B-Body; Sedan/Wagon; Windshield; Tinted With Shade
This replacement windshield is tempered laminate safety glass, designed to protect passengers from road debris. Available tinted. Each glass is professionally packed with extra care to prevent damage during shipping. Features...
1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each
Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...
1970-71 Challenger, Barracuda; Convertible Rear Window; Tinted Glass; Crush Vinyl; White
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you receive...
1970-74; Challenger, Barracuda, Cuda; Hood Hinges; with Springs; Pair
Reproduction of the original All Years All Makes All Models hood hinges designed for 1970-74 Mopar E-body models. Each hood hinge is manufactured to exact factory specifications and includes OE style hood hinge springs. Get...
1970-71 Dodge Challenger, Plymouth Barracuda; Convertible Top; Crush; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1967-70 Dodge, Plymouth B-Body; Convertible Top; Crush; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1965-66 Plymouth Valiant; Convertible Top; Pinpoint; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1956-64 Chrysler, Dodge, Plymouth; Convertible Top Motor and Pump Assembly
This OE style replacement motor and pump assembly features original style locations for electric and fluid connections. Fits a wide variety of 1956-64 Chrysler, Dodge, Plymouth, Imperial, and Desoto models including, but not...
1963-64 Plymouth Valiant; Convertible Top; Pinpoint; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1966 Dodge, Plymouth B-Body; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side
Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...
1966-67 Coronet/Belvedere II/Satellite; 2-Door Hardtop; Back Window Glass; Tinted
Replace your pitted, scratched or broken original back window glass with this new DOT certified replacement tempered safety glass. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass...
1972 Barracuda, Cuda; Rear Bumper; With Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome rear bumper for 1972 Plymouth Barracuda, Cuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating...
1972 Plymouth Barracuda; Front Bumper; with Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome front bumper for 1972 Plymouth Barracuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating that...
This replacement windshield is made with tempered laminate safety glass that is designed to protect passengers from road debris in the event of an accdent and features a green tinted band at the top. Note:All glass is...
1970-71 Plymouth Barracuda; Front Bumper; Without Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome front bumper for 1970-71 Plymouth Barracuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
OER reproduction front windshield glass for 1980-93 Dodge B-Series and 1980-83 Plymouth PB-Series Van models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against...
OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...
1973-74 Barracuda, Cuda; Front Bumper; with Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome front bumper for 1973-74 Plymouth Barracuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating...
1973 Plymouth Barracuda; Rear Bumper; With Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome rear bumper for 1973 Plymouth Barracuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating that...
1974 Barracuda, Cuda; Rear Bumper; with Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome rear bumper for 1974 Plymouth Barracuda, Cuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating...
1970-74 Plymouth; Barracuda, Cuda; Back Window Glass; Coupe; Tinited
Reproduction of the original style back window glass designed for use with 1970-74 Plymouth Barracuda, and Cuda models. Replace your missing, scratched or broken original vent glass with this new DOT (department of...
Reproduction of the original back glass designed for use with 1968-70 Dodge Coronet, Plymouth Belvedere, Road Runner, Satellite, GTX, and Super Bird models. Manufactured with the proper shape, curvature, and pattern in OEM...
1970-71 Barracuda, Cuda; Rear Bumper; without Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome rear bumper for 1970-71 Plymouth Barracuda, Cuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome...
1973-74 Mopar B-Body Outer Door Mirror; RH ; Chrome (passenger side)
Reproduction of the original bullet-style drivers side door mirror designed for use on 1973-74 Mopar B-body models. Each mirror is a duplicate of the original in design and fitment. Includes a bright chrome polish that will...
1971-74 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set
The doors on 1971-74 Dodge and Plymouth B-Body models were extremely heavy and hard on original hinges. Each hinge is manufactured to correct factory specifications that replicate the original in fitment, quality and design....
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1967-76 Dart/Swinger/Scamp; 2 Door Hardtop; Back Glass; Tinted
Replace your scratched, broken or missing original back glass with this new reproduction glass. Each glass is made of tempered safety glass that is the correct thickness and is not date coded). Note: Pictured for illustration...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Crush Grain; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Crush grain vinyl materials to ensure longevity and durability. Original manufacturing techniques...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Crush Grain; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques...
1964-65 Ddoge, Plymouth C-Body; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1963-64 Plymouth Valiant; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1965-66 Plymouth Valiant; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1964-65 Dodge, Plymouth C-Body; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1963 Fury, Polara; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each
Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...
1966 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1970-73 Duster, Dart, Valiant, Scamp, Demon; Outer Door Sport Mirrors; Pair
Reproduction of the original style Sport outer door mirror designed for use with 1970-73 Dodge and Plymouth A body models equipped with the remote style sport mirror option. Pair includes the drivers side remote mirror, and...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...