Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4
Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...
1965-86 GM; Interior Door Panel Clip; White Nylon; Each
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models
Reproduction sun visor support bushing and rubber tip set for various 1960-73 Chevrolet, Buick, Oldsmobile, and Pontiac models. Manufactured to factory specifications, this set includes the visor pivot support sleeves and the...
1964-73 GM; Sun Visor Support Bracket; Coupe; with Hardware; Die-Cast; Each
High quality reproduction of the original interior sun visor support bracket designed for use with various 1964-73 Buick, Chevrolet, GMC, Pontiac and Oldsmobile models. Each sun visor bracket is manufactured in quaility...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 Nova, Impala, Bel Air, Caprice; Headliner Bow Clip Set ; 6 Piece Set
Correct reproduction of the original headliner bow clips designed for use on various GM models. These clips are essential for keeping the center headliner bow in the correct location and to secure the dome lamp wiring...
1962-79 GM; Door Panel & Sail Panel Installation Clip; Each; Varius Models
Reproduction of the original style door panel installation clips used to install 1967-79 front door panels or for coupe rear quarter sail panels on various GM models. Clips can be used for standard and deluxe interiors. See...
Correct reproduction of the original outer headliner bow clips designed for use on various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each clip is manufactured in injection molded ABS replicating the original...
1962-81 GM Door Panel Clip Retainer Set ; 12 Piece Set
OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...
Reproduction front arm rest base set for various GM models including 1962-64 Chevy II, Nova, 1962-67 Bel Air, and 1964-67 Chevelle, GTO, and LeMans models among many others. Each arm rest base in manufactured in quality...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
Seat Foam Sheet; Non-Molded; Universal Fit; 68" x 36" X 1-1/2"
This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...
1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Polished Chrome; Drivers Side
Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...
1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Polished Chrome; Passenger Side
Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...
Reproduction of the original style carpet underlay designed for use with 1965-70 Chevrolet, Buick, Pontiac, and Oldsmobile B-Body models including Impala, Bel Air, Biscayne, and Caprice. Each set of carpet underlay is...
1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Brushed Chrome; Drivers Side
Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1955-68 Bel Air, Impala, GM Full Size Cars; Door Panel Nail Set; 26 Pieces
Reproduction door panel nails for 1955-68 Chevrolet full size passenger cars. These door panel repair clips slip onto the door panel fastener strip to replace broken nails in the panel edging. Each set includes enough 3/4"...
Reproduction General Motors sun visor and convertible top latch receptacle for multiple 1971-76 GM vehicles. This is the part mounted on the windshield pillar that the sunvisor attaches to and is the convertible top latch...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile, and Pontiac models from 1968-72. Each arm rest pad is manufactured in quality automotive-grade self-skin urethane featuring the correct Madrid...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
72" x 36" Jute Padding Insulation; 40 oz.
Jute padding will insulate your interior from noise while helping to maintain an even temperature. For firewalls, floor pans, trunks, doors, and roof panels or other areas of the vehicle. These jute pads measure 72" x 36" and...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-1972 Buick, Pontiac, Olds; Front Arm Rest Pad; 12"; Teal Blue; RH; Urethane Reproduction
OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
Reproduction door pull strap end cap/cover for various 1970-76 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. This is the cover that hides the ends of the pull strap screw and bracket. These covers have...
12 Piece Plastic Firewall Insulation Retainer Set
Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. Quantities vary by model, use as needed. The OER® Authorized logo...
1955-81 GM; Firewall Pad Fastener Set; 4 Piece Set
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
Nylon Door Panel Clip Set; Set of 12 Clips
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
1960-73 GM; Sun Visor Support Bushing/Sleeves; Various Models; LH and RH
Replacement sun visor support sleeve/bushing for various 1960-73 Chevrolet, Buick, Oldsmobile, and Pontiac models. Manufactured to factory specifications, this black plastic bushing fits into the sun visor pivot bracket and...
7 Piece Plastic Firewall Insulation Retainer
Set of 7, nylon firewall insulation retainer clips for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Made of durable black nylon plastic. The OER® Authorized...
Nylon Door Panel Clip Set; 8 Piece
These clips are designed to attach to the lower door panel. Once installed, the panel is pushed directly into the door frame.The nylon clips will keep the door panel positioned properly after installed. Applications:...
Plastic firewall insulation retainer clip for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Sold individually. Use as required. The OER® Authorized logo...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1960-78 Upholstery Installation and Padding Kit For Front Bench Seat
Reupholstery padding kit for front bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 1 30" x 70" x 1-1/2" thick foam 1 10 lb roll of cotton 4 yards of burlap 4 yards...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Brushed Chrome; Passenger Side
Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...
Reproduction of the original style carpet underlay designed for use with 1971-76 Chevrolet, Buick, Pontiac, and Oldsmobile B-Body models including Impala, Bel Air, Biscayne, and Caprice. Each set of carpet underlay is...
Front Bucket Seats; Upholstery Installation and Padding Kit
Reupholstery padding kit for front bucket seats. Comes with material to insulate and pad seat frames prior to installing new upholstery. Include enough material to reupholster both front bucket seats on a wide variety of...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
1968-70 Chevy, Oldsmobile; Front Arm Rest Base; 2 Door; Black; LH Driver Side
Reproduction of the original front arm rest base designed for use with various 1968-70 Chevrolet and Oldsmobile models. Each arm rest base is manufactured in injection molded ABS to original specifications replicating the...
1968-70 Chevrolet, Oldsmobile; Front Arm Rest Base; 2 Door; Black; RH Passenger Side
Reproduction of the original front arm rest base designed for use with various 1968-70 Chevrolet and Oldsmobile models. Each arm rest base is manufactured in injection molded ABS to original specifications replicating the...
1968-70 impala; Caprice; Front Arm Rest Pad; 2 Door; 16"; Black; LH; Urethane Reproduction
Reproduction front arm rest pad designed for 1968-70 Impala and Caprice 2 door models and other GM models as listed. Each armrest pad is manufactured from automotive-grade molded polyurethane over a steel core adding extra...
1968-70 Impala, Caprice; Front Arm Rest Pad; 2 Door; 16"; Black; RH; Urethane Reproduction
Reproduction front arm rest pad designed for 1968-70 Impala and Caprice 2 door models and other GM models as listed. Each armrest pad is manufactured from automotive-grade molded polyurethane over a steel core adding extra...
Seat Foam Padding Sheet; 72" x 30" x 1.5"
When it comes to the interior, this seat foam padding is perfect when replacing the seat upholstery. Each sheet is 72" x 30" x 1.5" and can be used for virtually any front or rear interior seat to build up the foam and add...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
3" x 6" Jute Padding Insulation; 28 oz.
Jute padding will insulate your interior from noise while helping to maintain an even temperature. For firewalls, floor pans, trunks, doors, and roof panels or other areas of the vehicle. These jute pads measure 3' x 6 and at...
1968-1972 Front Arm Rest Pad; 12"; Moss Green; LH; Urethane Reproduction
OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-1972 Front Arm Rest Pad; 12"; Moss Green; RH; Urethane Reproduction
OER® reproduction of the original front armrest pad designed for use on various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...