This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1973-77 Chevelle, Regal, Cutlass, LeMans; 19 Gallon Fuel Tank; w/o Filler Neck;
Reproduction fuel tank for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans. This reproduction fuel tank is manufactured in quality stamped steel featuring a zinc coating for rust and corrosion...
The most accurate reproduction fuel tank sending unit in the industry, with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and float as original. This unit...
1978-87 Regal, 78-81 Cutlass; 4 Door; Fuel Tank; 17 Gallon; Zinc Coated
Reproduction tank for 1978-87 Buick Regal 4 Door models equipped with a carburated engine. Each fuel tank is manufactured in quality stamped steel to original factory specifications, featuring original size, contours, filler...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
Reproduction fuel tank sending unit for 1965-66 Chevrolet Impala, Bel Air, Biscayne, Caprice models and 1965-67 Chevelle, El Camino, Malibu and other GM A-Body and B-Body models with 5/16" line. The most accurate reproduction...
Reproduction of the original style fuel tank mounting straps that fit various 1964-1966 Buick, Chevrolet, Pontiac, and Oldsmobile mid-size, and full size models as listed (except station wagon). Each strap is manufactured in...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve
Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...
Reproduction fuel tank sending unit for 1968-70 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, GS, Oldsmobile Cutlass, 442, and 1970 Chevrolet Monte Carlo models. Manufactured to factory...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
1973-77 Chevelle, Regal, Cutlass, LeMans; Fuel Tank Filler Neck; 13-1/4" Long, 2" Diameter
Reproduction of the original fuel tank filler neck designed for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans models. Each neck is manufactured to factory dimensions and replaces the original...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Reproduction of the original style fuel tank designed for use with 1970-74 Impala, Bel Air, Biscayne, Catalina, Bonneville and GM full size station wagon models. This fuel tank is made of zinc-coated steel and has a capacity...
1975-77 Regal and Cutlass; Fuel Tank; Zinc Coated; 21.9 Gallon Capacity
Reproduction fuel tank for 1975 Buick Regal and Oldsmobile Cutlass models and 1976-77 Buick Regal and Oldsmobile 4 door models (except wagon). Each fuel tank is manufactured to correct factory specifications featuring...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1973-77 GM A-Body; Fuel Tank Sending Unit; with A/C; 3-Lines; Regal, Century, Chevelle, Laguna
Reproduction of the original fuel tank sending unit designed for use with 1973-77 GM A-body models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
Reproduction of the original fuel tank sending unit for use with various 1973-77 Regal, Century, Chevelle, Laguna, Malibu, Monte Carlo, etc. models as listed. These sending units will replace the old or worn out original...
Reproduction fuel tank sending unit for 1978-88 Chevrolet Malibu, Monte Carlo, Buick Regal, Oldsmobile Cutlass, Pontiac Grand Prix, and Grand Am models. Manufactured to factory specifications, this sending unit accurately...
Reproduction fuel tank sending unit for 1978-88 Chevrolet Malibu, Monte Carlo, Buick Regal, Oldsmobile Cutlass, Pontiac Grand Prix, and Grand Am models. Manufactured to factory specifications, this unit accurately measures...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Reproduction fuel tank sending unit for 1971-72 Chevrolet Chevelle, El Camino, Monte Carlo, Pontiac GTO, LeMans, Buick Skylark, GS, Oldsmobile Cutlass, 442, and GMC Sprint models. Manufactured to factory specifications, this...
Reproduction fuel tank sending unit for 1968-70 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, GS, Oldsmobile Cutlass, 442, and 1970 Chevrolet Monte Carlo models. Manufactured to factory...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Reproduction fuel tank sending unit for 1971-72 Chevrolet Chevelle, El Camino, Monte Carlo, Pontiac GTO, LeMans, Buick Skylark, GS, Oldsmobile Cutlass, 442, and GMC Sprint models. Manufactured to factory specifications, this...
Reproduction of the original fuel tank mounting strap designed for use with 1978-1983 Century, Malibu, Cutlass, and LeMans 4 door sedan, and station wagon models. Each strap is manufactured in quality stamped steel with all...
Reproduction fuel tank mounting straps for 1978-83 GM G-Body 2-door models produced using heavy-duty preformed steel that are black EDP coated to deter premature rusting. Straps are 37-3/8" long for 2-door models only. Fits...
1970-1972 Oldsmobile Cutlass 442, F85; Choke; Tube
1970-1972 Oldsmobile Cutlass, 442, F85, Cutlass Supreme choke pipe with 455 with 4 bbl carburetor. This tube has a double twist that was only used on the assemble line cars. {specs} {fitment}
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1973-77 Chevelle, Regal, Cutlass, LeMans; Fuel Tank Strap Set; 35-1/2" Long; Stainless Steel; Pair
Reproduction of the original style fuel tank mounting straps for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans models. Each strap is manufactured in quality stamped stainless steel for long...
1968-72 Chevelle, GTO, Cutlass, GS; Fuel Tank Mounting Straps; Pair; Except Station Wagon Models
Reproduction of the original style fuel tank mounting straps for various 1968-72 GM A-body models including Chevelle, El Camino, GTO, LeMans, Gran Sport and Cutlass models. Each strap is manufactured in quality stamped steel...
Stainless steel fuel tank mounting straps for various 1968-72 GM A-body models including Chevelle, El Camino, GTO, LeMans, Gran Sport and Cutlass models. Each strap is manufactured in quality stainless steel with all correct...
1973-77 Chevelle, Regal, Cutlass, LeMans; Fuel Tank Strap Set; 35-1/2" Long; Zinc Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps for various 1973-77 GM A-Body models including Chevelle, Regal, Cutlass and LeMans models. Each strap is manufactured in quality stamped steel and galvanized for...
This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...
1969-81 Fuel and Brake Line Clip ; Dual Line 3/8" and 1/4"
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
1968-79 Accelerator Control Cable Retainer ; Various Models
OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel
OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}