1967-89 GM; Universal Tachometer Filter
FEATURED

Product#: MG019219

1967-89 GM; Universal Tachometer Filter

Eliminate tach signal noise and surges caused by your ignition system with this compact and easy-to-install tachometer filter. This filter installs between the tachometer and the signal source and modifies the signal for...


Product#: IN3459T

1970-72 Oldsmobile Cutlass, 442; Rally Gauge Pack; Tic Toc Tach Clock

Show quality Rally Pack & tach setup that takes place of tell tale gauges. One unit goes where the clock was. It houses a tic tock tachometer gauge with a clock in the middle. The other gauge goes where the fuel gauge is. The...


Product#: 7026520

1955-83 Chevy, Buick, Pontiac, Olds; Cigarette Lighter Heating Element; Rochester Style

Correct reproduction cigarette lighter heating element for various 1955-83 models equipped with Rochester lighters. This element will replace the non-working original and get your lighter working again. Remove the old element...


Product#: A9100101

Hood Tachometer; 8000 RPM; Dixco Style; Universal Fit

Reproduction Dixco style hood tachometer for universal applications. This tach was a popular dealer installed accessory and was used by a number of high profile builders back in the day, incuding Yenko, Baldwin, Garlits and...


1966-67 Oldsmobile F85, Jetstar, Starfire; Dash Instrument Panel Bezel; For Floor Shift
NEW

Product#: 6456616

1966-67 Oldsmobile F85, Jetstar, Starfire; Dash Instrument Panel Bezel; For Floor Shift

Correct reproduction dash instrument panel bezel for 1966-67 Oldsmobile F85, Cutlass, and 442 models with floor shift. Each dash bezel is manufactured to original GM specifications offering an authentic appearance and fit....


Product#: IN3463T

1970-72 Oldsmobile Cutlass, Cutlass Supreme, 442; Dash Clock; Quartz

This is an exact reproduction of the original dash clock for 1970-72 Oldsmobile Cutless, Cutlass Supreme, and 442 models. It hasa quartz movement. This has identical appearance and construction to supply a perfect fit and...


Product#: WE355

Instrument Panel Socket; 1/2" Hole; For 158, 194, or 194A Light Bulbs

Lamp bayonet style socket for general use with 158, 194, or 194A light bulbs. Fits a wide range of 1955-1997 models that require a socket to fit a 1/2" hole. Vehicle Application Summary 1955-1987 Buick 1955-1987 Cadillac...


Product#: 14960

1976-90 Chevrolet, Oldsmobile, Pontiac; Cigarette Lighter Knob and Element; Rochester Style

Reproduction Rochester type cigarette lighter for various GM models including 1978-81 Camaro and other popular vehicles. Manufactured to original factory specifications. Includes the knob and Rochester style element and...


Product#: B9111

1964 Bel Air, Impala, Biscayne; In Dash Lighter Assembly; Casco; Housing and Retainer; 1" Style Receiver

Reproduction Casco cigarette lighter knob, element, housing, and retainer for various 1964 GM models including Chevrolet Biscayne, Bel Air, and Impala models. This is an exact reproduction of the knob style originally...


1970-72 Oldsmobile Cutlass, 442; Dash Bead Molding; With Clips
NEW

Product#: IN3418T

1970-72 Oldsmobile Cutlass, 442; Dash Bead Molding; With Clips

Correct reproduction dash bead molding for 1970-72 Oldsmobile 442 and Cutlass models. Each dash bead molding is manufactured to original GM specifications offering an authentic appearance and fit. Features correct chrome...


Product#: 404775

1970-1972 Oldsmobile Cutlass, 442; Chrome Plated Wiper Switch Bezel

1970-1972 Oldmobile Cutlass, 442, F85 chrome windshield wiper switch bezel. Replaces GM part# 404775. Must order aluminum insert separately. {specs} {fitment}


Product#: 72

Cigarette Lighter Element; Without Knob; 1" Long; Casco Style; Number 72

Reproduction Casco style 1" cigarette lighter element without knob to fit a wide variety of vehicles. Replaces Mopar part # 3004190 element. Correct element to repair GM part #'s 344803, 3986887. Replacing the old or worn out...


Product#: 78

Cigarette Lighter Element; without Knob; 7/8" Long; Casco Style; Number 78

This is the number Casco style replacement style cigarette lighter element that fits a wide variety of vehicles equipped with a 7/8" Casco element. Replacing the old or worn out lighter element can allow your lighter to work...


Product#: *R5432

1947-1982 GM; Glove Box Insert Clip Set; 10 Piece Set; OER

These reproduction stamped metal clips attach to the glove box liner in various classic GM passenger cars and trucks. The clip is manufactured from quality stamped steel to the original GM design. These clips allow theglove...


Product#: 7027910

1955-79 GM; Cigarette Lighter Housing ; Rochester; Long Stud Type; Various Models

Reproduction of the original cigarette lighter housing designed for 1955-79 GM vehicles with a Rochester style cigarette lighter. The lighter housing mounts into the dash. The cigarette lighter knob and element are inserted...


Product#: 398165

1967-72 GM; Traffic Hazard Warning Knob; Chrome; Short Style; Various Models

High quality reproduction of the original hazard flasher knob designed for use on various GM models. This authentic replacement is manufactured in zinc die-cast material than chrome plated to a lusterous shine. Features the...


1966-67 Oldsmobile F85, Jetstar, Starfire; Dash Instrument Panel Lens; For Rally Pack Gauges
NEW

Product#: 6458480

1966-67 Oldsmobile F85, Jetstar, Starfire; Dash Instrument Panel Lens; For Rally Pack Gauges

Correct reproduction dash instrument panel lens for 1966-67 Oldsmobile F85, 442, and Cutlass models with Rally Pack gauges. Each dash lens is manufactured in quality injection-molded acrylic to original GM specifications...


Product#: 3782619

1961-63 Chevrolet; Cigarette Lighter Knob and Element Assembly; Various Models; Casco Style; 1 Inch Element

Reproduction Casco style cigarette lighter assembly including the knob and 1" long heating element for 1961-63 Impala and Full Size Chevrolet passenger car and various other Chevrolet models. Designed and manufactured by...


Product#: 11516142

1960-2004; Cigarette Lighter Assembly; Casco Style; Without Knob; Housing, Retainer, and 7/8" Tall Element; 3-Piece Set

Reproduction cigarette lighter housing assembly for vehicles equipped with lighters that use 7/8" Casco style elements. This lighter housing is designed for various GM models including Camaro, Corvette, Firebird, Impala, and...