1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; RH Passenger Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1977-96 Buick, Chevy, Pontiac Oldsmobile; Lower Control Arm; LH Drivers Side; Various Models
Replacement lower control arm for a wide variety of GM applications including 1977-96 Impala/Caprice, and various other GM full size models. Each factory replacement lower control arm includes pre-installed bushings and ball...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
This drop spindle set is designed to provide a full 2 inch drop on a variety of GM vehicles while preserving factory ride quality, suspension geometry, and handling characteristics. Each spindle is manufactured from durable...
This stock replacement spindle set is designed for a variety of GM vehicles and is manufactured to match the original GM spindles in every critical dimension. Constructed from durable cast iron and finished in black for an...
1970-72 Buick Skylark, GS 455, GS; Chassis & Suspension; Hardware Bolt Kit; OEM
This is a 129 piece kit it includes all the bolts needed to attach your suspension & steering to the frame for 1970-72 Buick Skylark, GS and GS 455 models. Includes brake line and fuel line "clamp bolts" as well as...
New performance upper and lower rear control arms for 1978-87 Buick Regal and various 1978-88 GM G Body models. Constructed from heavy gauge square boxed steel tubing, these control arms deliver a significant strength upgrade...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/8" diameter bar. This versatile sway bar fits a wide range of GM vehicles including Buick Skylark and Special,...
This reproduction disc brake spindle set is designed for a wide range of GM muscle car models, including 1967-1969 Camaro and Firebird, 1968-1974 Nova and other X body vehicles, as well as 1964-1972 Chevelle and additional A...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/4" diameter bar. Engineered to significantly reduce body roll, under steer, and over steer during cornering, this...
1954-05 GM; Front Sway Bar End Link; 3-3/8" Spacer; LH or RH; 2 Required; GK8988
Complete replacement set designed to restore proper suspension performance by replacing the original worn bushings and hardware. Manufactured to factory specifications for durability and precise fit. Features and Benefits:...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1978-88 Buick, Chevrolet, Olds, Pontiac A, G-Body; Rear Trailing Arm Set; Lower
Reproduction rear lower trailing arms for 1978-88 A & G-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs...
This stock replacement spindle is designed for a variety of GM applications and is engineered to match the original GM spindle in design, fit, and function. Manufactured from durable cast iron and finished in black for an...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Reproduction rear upper trailing arms for 1968-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
Reproduction rear upper trailing arms for 1964-67 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1968-72 Chevelle, Skylark, Cutlass, GTO; Control Arm; Rear Upper W/Polyurethane Bushings
Reproduction of the original rear upper control arm for use with various 1964-67 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design,...
1964-67 Chevelle, GTO, Cutlass; Rear Control Arm; Traction Control;; Pair
Reproduction of the factory installed reinforcement traction bars rear control arm tie bars. These were installed at the factory on all 4 speed manual transmission applications. They will also work for automatic transmission...
1964-72 Various GM Vehicles Chevelle, GTO, Cutlass; Shim/Bolt Kit; Rear Sway/Stabilizer Bar
New OEM rear sway bar for 1964-72 GM applications. Reproduction rear stabilizer/sway bar bolt and shim kit for various 1964-72 GM vehicles Which includes GTO, Cutlass, Skylark and Chevelle. See vehicle fitment for all...
Reproduction front sway bar bushing and mounting bracket set for 1964-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a 1-1/4" sway bar. Manufactured to factory specifications, this set includes two...
1964-72 Various GM Vehicles Cutlass, 442, Chevelle; Rear Suspension; Bumper; GM # 3996323
Brand new reproduction 1964-72 various GM models including Chevelle, 442, Cutlass rear suspension bumper. This bumper mounts on the rear of the frame to keep the bottoming out against the frame. This is the round style tip...
Includes all the components needed to replace the original bushings and hardware. One set services only one side of the vehicle, with two sets required per vehicle. Features a 2" spacer for proper installation and alignment....
1964-66 Various GM Applications Including GTO, Chevelle, Skylark; Rear Coil Spring; Hold Down Clamps
This is the rear coil spring hold down clamp for rear end. New reproduction this factory mounting clamp that holds the rear coil spring to the rear end. Without these clamps, your spring will make a "clunking" noise when...
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1958-88 Various GM Vehicles Chevelle, Skylark, Cutlass, GTO; Front Sway Bar; Heavy Duty Bracket; WS6
New reproduction of the OEM 1964-88 GM heavy duty front sway bar bracket for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models. See vehicle fitment fort all...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
1978-05 GM; Lower Control Arm Bushing; Rearward
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
These sway bars are engineered to reduce body roll, under steer, and over steer during cornering, resulting in noticeably improved handling, stability, and overall vehicle control. Designed to deliver better road feel without...
Reproduction lower control arms for various 1978-87 GM vehicles including 1978-87 Buick Regal, Grand National, Type T, and GNX models. Each control arm is manufactured from heavy duty steel and built to exact factory...
Reproduction upper control arms for various 1978-87 GM A and G Body intermediate vehicles including 1978-87 Buick Regal models. Each control arm is manufactured from heavy duty steel and built to factory specifications for...
1964-72 Chevelle, GTO, Cutlass; Rear Lower Control Arm; W/Polyurethane Bushings; Pair
Reproduction rear lower control arm for various 1964-72 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and fitment. Replace a...
Stock style upper and lower rear control arms for 1978-87 Buick Regal and various 1978-88 GM G Body models. Manufactured from heavy gauge steel and finished in durable black powdercoating, these control arms provide an...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction boxed rear lower control arm for various 1964-72 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and fitment....
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; LH Driver Side
Reproduction lower control arm for use on a variety of 1964-72 GM A-Body models. Each control arm is manufactured in stamped steel to OE specifications for a precise fit and reliable performance. This complete assembly...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side
Reproduction lower control arm for use on various 1964-72 GM A-Body models. Manufactured in stamped steel to OE factory specifications for a precise fit and reliable performance. Each assembly includes pre-installed round...
1971-96 GM; Upper Control Arm Bushing; Various Models; Pair
Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1964-72 GM A-Body; Rear Control/Trailing Arms; Lower; With Original Style Rubber Bushings; LH and RH
Reproduction rear lower trailing arms for 1964-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
F41 original-style rear sway bar for 1964-72 Chevrolet Chevelle, El Camino, Pontiac GTO, Tempest, LeMans, Buick Skylark, Oldsmobile 442, Cutlass, and 1970-72 Chevrolet Monte Carlo models. Manufactured to factory...
1964-72 El Camino, GTO, Skylark; Rear Sway Bar, Stabilizer Bar; 1" Diameter
Performance rear sway bar or stabilizer bar for various 1964-72 GM models including El Camino, GTO, Skylark, 442 models. Features a plated finish for corrosion resistance. Replace the original sway bar with this larger...
New gold cadmium coated rear sway bar for 1964-72 GM applications. Reproduction rear stabilizer/sway bar for various 1964-72 GM vehicles Which includes GTO, Cutlass, Skylark and Chevelle. This stabilizer bar is 7/8" inches in...
This stock replacement spindle is designed for a variety of GM vehicles and is manufactured to replicate the original GM spindle in both fit and function. Constructed from durable cast iron and finished in black for an...
1970-96 GM Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...
Reproduction rear upper control arm for various 1964-67 GM A-body models including Chevelle, GTO, Cutlass and El Camino. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design, and...
1978-88 Buick, Chevrolet, Olds, Pontiac A, G-Body; Rear Trailing Arm Set; Upper
Reproduction rear upper trailing arms for 1978-88 A & G-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs...
Reproduction rear crossmember to frame reinforcement braces for 1968-72 Chevelle, El Camino, GTO, Tempest, LeMans, Skylark, 442, and Cutlass models, as well as 1970-72 Monte Carlo and 1971-72 GMC Sprint. Manufactured from...