1970-72 Oldsmobile Cutlass, 442, W30; Ram Air; Lower Air Cleaner Base
New reproduction of the original 1970-72 Oldsmobile Cutlass, 442, W-30, W-31 Rally 350 ram air cleaner base that fits 350 and 455 motors. It features correct snorkel, 5 holes in base of air cleaner, 2 holes with correct...
1968 Oldsmobile Cutlass, 442; Lower Ram Air Scoop; Ducts
This is a pair of OEM replacement factory lower bumper scoop ducts. Replace the broken or missing scoop ducts with these new replacements for 1968 Oldsmobile Cutlass, 442 W-30 and W-31 models. This is the only scoop on the...
1/4"-20; Air Cleaner Wing Nut; Various Car and Truck Models
Correct wing nut used with all carburetors with 1/4" carburetor studs. After years of use your original air cleaner can become rusted or broken. This wing nut is the perfect replacement for a rusty or damaged original. Fits a...
1968-69 Oldsmobile 442, Cutlass; Air Cleaner; Heat Stove Adapter
Replacement air cleaner heat stove adapter 1968-69 Oldsmobile Cutlass & 442 models.It mounts under the air cleaner and the heat riser tube connects to it. Fits 1968 Cutlass with or without ram air and 1969 Cutlass air...
1970-72 Oldsmobile Cutlass, 442; OAI Door; Vacuum Motor
Replacement OAI air cleaner vacuum motor for 1970-72 Oldsmobile Cutlass and 442 models with Ram Air system. This vacuum motor is made to OE specs for both fitment and functionality. It is also gold cadmium plated for...
1963-81 GM; Carburetor Air Cleaner Stud; 1/4"-20 X 2-5/16"; with Rochester / Carter
Carburetor air cleaner stud for various GM models with Rochester or Carter carburetors. The stud is standard SAE thread and is coated in black zinc for corrosion resistance. Stud measures 1/4"-20 x 2-5/16" with stud is...
1964-72 Chevrolet, Oldsmobile; Air Cleaner Flame Arrester
This small domed mesh cap commonly known as the flame arrestor screen is an exact reproduction of the original. This item is usually missing or dented. Installs on the upper edge of the air cleaner tube where it protrudes...
1968-76 Buick, Chevrolet, Oldsmobile; Air Cleaner Thermal Intake Vacuum Sensor
Reproduction air cleaner sensor for various 1968-76 Buick, Chevrolet, Pontiac and Oldsmobile models. Replaces OE part number # 6482242. Vacuum Sensonr used on 1969 Pontiac Firebird and 1969-1970 Pontiac GTO Ram Air III and...
Reproduction threaded stud used on Chevrolet models equipped with Cowl Induction System. The stud consists standard SAE thread and is coated in clear zinc for corrosion resistance. This stud is used for all 1967-1970 big...
1969-75 Camaro, Firebird, Nova, Impala; Air Cleaner Vacuum Activated Heat Diaphragm and Bracket
Reproduction of the original air cleaner vacuum actuated heat diaphragm and bracket designed for use with various 1968-75 Chevrolet, Pontiac, and Oldsmobile models. Manufactured to correct factory specifications. This vacuum...
1968-69 Olsamobile Cutlass, 442, W30, W31; Air Cleaner Hose Duct; Inner Fender Clamp
New replacement Ram Air hose clamp for lower air cleaner hose to inner fender. It fits 1968-69 Oldsmobil Cutlass, 442 W30 and W31 models with Ram Air Cleaner. The clip/clamp is round and made from hardened steel with a...
1959-75 Various GM Applications; Stainless Steel Carburetor Ait Cleaner Stud; 5" long
Replacement carburetor air cleaner stud This stud is made out of 304 stainless steel that will never rust or change color. This stud measures 5" long. Fits various 1959-75 GM models including Impala, Skylark, LeMans and...
1965-72 Various GM Applications; Stainless Steel Carburetor Ait Cleaner Stud; 3-3/4" long
Replacement carburetor air cleaner stud made out of 304 stainless steel that will never rust or change color. This stud fits 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac that use 3-3/4" long carburetor stud. Also fits...
Reproduction Tri-Power cast iron intake manifold for 1966-67 Oldsmobile Cutlass and 442 with 400/455ci engines. This intake manifold is the perfect building block for your tri-power induction system. Casting# 398238. See...
1970-72 Oldsmobile Cutlass, 442; OAI Air Cleaner Assembly; Without Base; 455 Engine
New replacement outside air induction air cleaner without lower carburetor pan base. It has the proper vacuum valve, air filter top, vacuum lines, flapper door, springs and valve cover spring retainers.. This is only the top...
1969 Oldsmobile Cutlass, 442; Lower Ram Air Scoop; Ducts
This is a pair of OEM replacement factory lower bumper scoop ducts. Replace the broken or missing scoop ducts with these new replacements for 1968 Oldsmobile Cutlass, 442 W-30 and W-31 models. This is the only scoop on the...
Reproduction front crankcase cover or timing cover for a variety of 1964-79 GM models equipped with Olds 307, 330, 350, 403, 400, 425, 455 V8 engines including the popular 1977-80 Firebird and Trans Am 403ci equipped models...
Chrome Air Cleaner; 14" x 3" Filter Element
Aftermarket replacement chrome air cleaner. Features a triple chrome plated lid. Open element style air cleaner. Will fit carbs with 5-1/8" neck.
1965-74 GM; Air Cleaner Filter; Square Mesh; 14"; with Correct Period Markings; A212CW; GM Licensed
Reproduction AC 212CW air filter element that installs on a wide variety of 14" diameter open element or closed element air cleaners, cowl induction air cleaners and 1970-72 dual snorkel air cleaners. This air cleaner filter...
1968-69 Oldsmobile Cutlass, 442, W30 and W31; Under Bumper Scoop Bracket Set; 6-Piece Set
This is a complete set of OEM replacement factory lower bumper scoop duct mounting brackets. Replace the broken or missing scoop ducts with these new replacements for 1968-69 Oldsmobile Cutlass, 442 W-30 and W-31 models. Sold...
1968-78 Buick 350, 350H, 350J, 231; Timing Pointer
Reproduction timing pointer for various 1968-1976 350 V-8 engine, 1977-78 350H and 350J and 1975-1977 231 V-6 engine.
Reproduction curved oil dip stick tube for various 1967-79 Buick, Chevrolet, GMC, and Pontiac small block models. Each tube is manufactured to factory specifications offering an authentic appearance and fit. Measures 6-1/2"...
1967-76 Pontiac Firebird, Trans Am; Air Filter; For Lower Pan; Ram Air
Reproduction of the original air filter designed for use with various Buick, Pontiac, and Oldsmobile models as listed. Each air filter is designed and manufactured to replicate the original offering an authentic appearance...
1966-77 Skylark, Cutlass, 1970-72 GS; Oil Sending Unit Elbow/Adapter
Reproduction engine oil pressure elbow for 1966-77 Cutlass, 1970-72 Skylark with rally gauges, and 1966-71 442 models with 350, 400, 403 or 455 engines. This is the 45° brass elbow that screws into the block and allows...
1968-69 Olsamobile Cutlass, 442, W30, W31; Air Cleaner Hose Duct; Oval Clamp.
These are the correct clamps that secure the Ram Air hoses to the air cleaner on 1968-69 Oldsmobile Cutlass F85, 442 W30 and W31 models. These are exact duplicates of the originals and are the finishing touch for any Cold Air...
1968-69 Olsamobile Cutlass, 442, W30, W31; Air Cleaner Hose Duct; Round Clamp;
New replacement Ram Air hose clamp for lower air cleaner hose to bumper scoop duct. It fits 1968-69 Oldsmobil Cutlass, 442 W30 and W31 models with Ram Air Cleaner. The clamp is round heavy gauge with phillips head screw and...
Chrome Dash Trim Refinishing Paint Marker
Chrome dash trim refinishing paint marker pen chrome. Now you can restore the chrome detail on your dash and other interior pieces. The chiseled felt tip retouches both thick and thin areas of the trim. paint is a brilliant...
1968-72 Various GM Applications; Stainless Steel Carburetor Ait Cleaner Stud; 4-1/8" long
Replacement carburetor air cleaner stud made out of 304 stainless steel that will never rust or change color. This stud fits 1968-72 Buick, Chevrolet, Oldsmobile, and Pontiac that use 4 1/8" long carburetor stud. Also fits...
1976-1984 GM Valve Cover Crankcase Vent Hole Grommet
Correct valve cover and crankcase molded rubber grommets which insert into the valve cover where the PCV or air cleaner to valve cover elbow is inserted. Each grommet is manufactured to exact specifications and will fit most...
Correct set of oil pan bolts for all Oldsmobile 307 / 330 / 350 / 400 / 403 / 455 engines. its a variety of 1964-79 GM models equipped with Olds engines including the popular 1977-80 Firebird and Trans Am 403ci equipped...
OER® "Factory Black" Semi Gloss Black Paint - 12 Oz Aerosol Can
This durable semi gloss coating provides a factory fresh appearance on the underside of the hood or on inner fender skirts, battery tray, radiator support, master cylinder, front control arms, brackets, pulleys, fan blade,...
OER Factory Black Paint; Ultra Flat Black; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
This extremely flat non-glare finish that is perfect for a variety of uses including items like hood hinges, latches, carburetor parts, seat adjusters, pulleys, linkage, nuts, bolts, washers, screws, clips, brackets and more....
1970-81 GM; Motor Mount Bolt; 7/16"-14 x 4-5/8"; Stamped "RSC"; Each
Reproduction bolt used to mount the steering box to the frame. Will work on both power or manual steering boxes. This is a 7/16" bolt that is 4-5/8" long. The bolts are made from high strength grade 8 steel which as been...
OER Hi-Temp Exhaust Coating; Cast Iron Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...
OER Factory Black Paint; Low Gloss Black; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
A durable low gloss coating that provides a factory fresh appearance on the frame, transmission crossmember, leaf spring shackles, control arms, firewall, cowl, brake components, AC compressor or anywhere else a low gloss,...
OER® Hi-Temp Exhaust Coating; Silver; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...
OER® Metal Mimic FX Stainless Steel Paint - 16 Oz Aerosol Can
OER® Metal Mimic FX high performance coatings were developed to mimic the appearance of bare metal so that you can refinish and protect all of the components that were originally left unpainted by the factory. Items can...
OER Hi-Temp Exhaust Coating; Black; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...
OER® Metel Mimic FX; Galvanized Zinc Blast Paint; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Metal Mimic FX high performance coatings were developed to mimic the appearance of bare metal so that you can refinish and protect all of the components that were originally left unpainted by the factory. Comes in a...
OER Underhood Detail Paint; Dark Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Underhood Detail Paint is a durable underhood coating used for detailing underhood items like hood hinges, safety and hood latch assembly, carburetors, pulleys, accelerator and transmission linkage, nuts, bolts,...
OER Metal Mimic FX; Aluminum Blast Coating; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Metal Mimic FX high performance coatings were developed to mimic the appearance of bare metal so that you can refinish and protect all of the components that were originally left unpainted by the factory. Comes in a...