Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1970-72 Oldsmobile Cutlass, 1970-71 442; Template Kit; Fender & Trunk Lid/Decklid
This is a fender and trunk lid emblem template kit to position 442 and W-30 emblems on the driver and passenger side fenders and trunk lid on 1970-72 Cutlass and 1970-71 442 models. It is a full decal that gets attached to...
1976-90 Oldsmobile; Nameplate Emblem; Front Fender, Trunk Lid, Tailgate, Rear Panel
Reproduction Oldsmobile nameplate emblem for a wide variety of Oldsmobile models including Custom Cruiser, Toronado, Starfire, Cutlass, Delta, Omega, and 98. This emblem fits on center of the front header panel or on the...
1973-75 Oldsmobile Cutlass; Hurst Olds Console Emblem; H/O Insignia; Die-Cast
Reproduction Hurst / Olds emblem for the floor-mounted center console in 1973-75 Oldsmobile Cutlass 442 models with Hurst package. Each die-cast console emblem has the Hurst Olds wording in the familiar H/O format.
1981-88 Oldsmobile; Rocket Outer Door Emblem; Self Adhesive
Reproduction Olds Rocket Insignia emblem for the outer door on various 1981-88 Oldsmobile Cutlass models. Each emblem features chrome plated lettering with red and black enamel accenting, just like the original. Each...
Reproduction Rocket emblem for the front stoneshield panel on all 1972 Cutlass, F85, Cutlass Supreme, and Vista Cruiser models. This emblem fits on the stoneshield panel between the two grills on the front end of the vehicle....
1970 Oldsmobile Cutlass, W30, W31; Radiator Tag Code EC (IF, CI, 74); Manual Transmission;
Reproduction of the original radiator tag EC for 1970 Oldsmobile Cutlass, W30 and W31 models with manual transmission. These are factory style metal tags that GM put on all radiators. It gives you the codes that GM put on...
1964-68 Oldmobile Cutlass; 4-Speed Transmission; Console Shift Pattern Emblem
Reproductiom shift pattern emblem for 1964-68 Oldsmobile Cutlass models with 4-Speed transmission. This emblem is identically reproduced to factory specification. It features the correct shift pattern with recessed black...
1970 Oldsmobile Cutlass, 442; Trunk Lock Cylinder Bezel; Oldsmobile Rocket
Reproduction trunk lid/decklid lock cylinder emblem bezel for 1970 Oldsmobile Cutlass and 442 models. Emblem is chrome with a black pinstriped border a black rocket. Sold individually.
1970-72 Oldsmobile Cutlass, 1970-71 442; Fender Emblem; W-30
Reproduction W-30 fender emblem for 1970-72 Cutlass and 1970-71 442 W-30 models. These emblems are chrome with inlaid black trim highlights an a black background. Sold individually.
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-1974 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Blue; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1967-74 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1976 Oldsmobile Cutlass, Delta, 98; Nose Emblem; Rocket Logo, Black And Gold
Reproduction Oldsmobile "Rocket" Insignia emblem for the front header panel on various 1976 Oldsmobile A-Body, B-Body, and C-Body models including Cutlass Colonnade, Delta 88, and 98. This emblem fits on center of the front...
1980-87 Oldsmobile Cutlass, Cutlass Supreme ; Trunk Lock Bezel; Cutlass Nameplate
Add the finishing touch to your 1980-87 Cutlass restoration with this quality reproduction trunk lock bezel. Features correct Cutlass script nameplate logo and double-sided adhesive tape for mounting. Originally installed by...
1969-72 Oldsmobile Cutlass, 1969-71 442; Trunk Emblem Set; 442 Chrome & Black
Reproduction trunk/decklid emblem set for 1969-72 Cutlass and 1969-71 442 models. These emblems are a three piece set of individual numbers and are chrome with inlaid black pinstriped outline. Sold as a set.
1986-88 Oldsmobile Cutlass ;Tail Light Lens Emblem; Rocket Insiginia; 2-Door; Red and Chrome
Add the finishing touch to your 1986-88 Cutlass 2-door RWD model restoration with this quality reproduction tail light lens emblem. Features correct Olds Rocket logo and double-sided adhesive tape for ease of mounting. Each...
1972 Oldsmobile Cutlass; Nose Emblem; Rocket
Reproduction front nose emblem set for use on 1972 Oldsmobile Cutlass models. This is the Rocket emblem mounts on the front nose between the grills it has a chrome Rocket with black background and chrome trim. Sold...
1969-73 Oldsmobile 442; Fender Emblem Set; 442
Reproduction fender emblem set for 1969-72 Cutlass and 1969-71 442 models. Thses emblems are a three piece set of individual numbers. Sold as a set.
1978-88 Oldsmobile A, G-Body; Instrument Panel Nameplate Emblem; Cutlass Models
Reproduction Oldsmobile nameplate emblem for the instrument panel on 1978-81 Oldsmobile A-Body, and 1982-88 Oldsmobile G-Body models. Attaches with two posts. Replaces GM # 560671 Fits: 1978-88 Cutlass models.
1971-77 Oldsmobile Cutlass; Die-Cast Fender Emblem; Cutlass Script
Reproduction Cutlass nameplate fender emblem. This emblem fits on left or right side on the front fender. Zinc die-cast emblem features chrome plated Cutlass script for an original factory appearance. Fits: 1971-77 Oldsmobile...
1970 Oldsmobile Cutlass; Die-Cast Fender Emblem; Cutlass Script
Reproduction Cutlass nameplate fender emblem. This emblem fits on left or right side on the front fender. Zinc die-cast emblem features chrome plating and backfilled script in black enamel for an original factory appearance....
1970 Oldsmobile Cutlass; Fender Emblem; Cutlass Script
Reproduction Cutlass script lettering fender emblem for 1970 Cutlass. These emblems are chrome with inlaid black trim highlights. Sold individually.
1964-89 Buick, Chevy, GMC, Pontiac, Oldsmobile; Rear Axle Identification Tag; Various Models
This reproduction limited slip rear axle ID tag is designed to ensure the correct gear oil is used when servicing the rear end. Commonly found on 1964-1989 GM models, this tag identifies the proper lubrication requirement for...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
1978-90 Door Sill Plate Emblem; Body By Fisher; Each
Correct reproduction "B ody by Fisher" door opening sill plate emblem for various 1978-90 Buick, Chevrolet, Pontiac, and Oldsmobile models. Each emblem is correctly stamped in aluminum material to exact specifications...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
1964-67 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Aqua; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1964-67 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...