Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1981-88 Oldsmobile Cutlass, Cutlass Supreme; Plate; Front License Plate Delete; Polished Stainless
Front license plate bracket delete stainless steel plate for 1981-88 Oldmobile Cutlass models. This plate covers the mounting area on the front bumper where the front license braket would mount. It is made of polished...
1971-73 Buick/Oldsmobile License Plate Holder Bracket
Reproduction license plate holder bracket to fit a variety of Buick and Oldsmobile models. Stamped steel with tension springs as original. Buick Applications: 1971-73 All models (except wagons) Oldsmobile Applications:...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1976-77 Oldsmobile Cutlass; Rear Bumper Filler Panel; Pair
Replacement rear side bumper filler panels for 1976-77 Oldsmobile Cutlass & 442 models.These fillers mount on the side of the vehicle and fill the space between the bumper and the body of the vehicle. These are made of rubber...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
1968 Oldsmobile Cutlass; Headlamp Filler; RH Passenger Side
Replacement headlamp filler panel for the right hand side (passenger side) for 1968 Oldsmobile Cutlass models. This goes behind the fender as a filler between the core support and the headlamp housing. Replace the old or...
1968 Oldsmobile Cutlass; Headlamp Filler; LH (Driver Side)
Replacement headlamp filler panel for the left hand side (driver side) for 1968 Oldsmobile Cutlass models. This goes behind the fender as a filler between the core support and the headlamp housing. Replace the old or damaged...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
1970-72 Oldsmobile Cutlass, 1970-71 442; Rear Bumper Guard; Impact Strip
Reproduction of the original rear bumper guard cushion/impact strip for use with 1970-72 Oldsmobile Cutlass and 1970-71 442 models with rear bumper guards. The cushion inserts vertically into the bumper guard opening. Sold...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....
7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.
Original Equipment Reproduction License Plate
Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.