Universal HIDE-A-WAY Antenna AM/FM; OER Amplified Electronic
If you want great reception without a visible antenna, then the OER® Authorized Hide-a-Way amplified electronic antenna may be just what you need! A major breakthrough in antenna science, the OER® Authorized...
1967-1969 Oldsmobile Cutlass, 442, F85; Front Fender Antenna Body and Cable
1967-1969 Oldsmobile Cutlass, 442, F85 front fender antenna body and cable cable. Replaces GM part# 402254
1964-72 GM; Oval Front Dash Speaker; 4" x 10"; Four Bolt; 8 - 10 Ohms; Each
Reproduction 4" x 10" Oval 8-10 Ohm factory front dash speaker for various 1964-72 GM models. Each speaker is manufactured to original specifications featuring a cosmetically correct rectangular magnet and 4 bolt design for...
Repair the antenna mast and cable for the power antenna with this reproduction repair set. Works on various 1982-93 Buick, Chevrolet, Pontiac, and Oldsmobile models. Comes with the mast and cable. This is an upgraded service...
1968-69 Oldsmobile Cutlass, 442; Radio Bezel; Black W/Chrome Accent
Metal die cast radio bezel for 1968-69 Oldsmobile Cutlass and 442 models. This bezel black with chrome accented highlights. It is just what is needed to renew the stereo section for Oldsmobile Cutlass and 442 models dash...
1970-81 Buick, Chevrolet, Pontiac, Oldsmobile; Rear Speaker Grille; With 4 Mounting Studs
Reproduction rear speaker grille for various 1970-81 Buick, Chevrolet, Pontiac, and Oldsmobile models including Camaro, Firebird, Impala, and Regal. Each grill is manufactured in stamped steel to correct factory...
1964-81 Buick, Chevy, Olds, Pontiac; Rear Seat Shelf Speaker Mounting Studs; 4 Piece Set
Reproduction of the original style rear seat shelf speaker mounting studs for use with various 1964-81 GM coupe and hardtop models. These studs have the correct spring clips used to keep tension on the stud when attached to...
Reproduction rear speaker grille for various GM, Ford, and Chrysler models including 1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth. Fits Chevelle, Malibu, Impala, Caprice and Nova among other models....
1975-79 Nova, Ventura, Omega, Skylark; Dash AM Radio Knob Set; 4 Piece Set
Reproduction of the original radio knobs designed for use on vehicles originally equipped with AM radios. Set includes volume, tuning, tone and dummy knobs. Manufactured to exact specifications, knobs will fit all Nova and...
1967-1974 Various GM Vehicles Including Camaro, Firebird, GTO; Dash Speaker; Mounting Bracket
New reproduction dash speaker mounting bracket for multiple GM vehicles including 1967-69 Chevrolet Camaro, Pontiac Firebird, and Oldsmobile Omega models. See vehicle fitment for all applications.
1970-72 Oldsmobile Cutlass Supreme, Cutlass, 442; Radio Knob; Chrome W/Black Accents
Reproduction of the original radio knob set designed for use on 1970-72 Oldsmobile Cutlass Supreme, Cutlass and 442 models. This radio knob set will replace the old or worn out original knobs on factory in-dash radios. They...
1968 Oldsmobile Cutlass, 442, F85; Outer Radio Knobs; Chrome with Black Stripe
1968 Oldsmobile Cutlass, 442, F85 outer radio knobs. These new chrome knobs have a black stripe. You can now replace the missing or damaged radio knobs. Sold by the pair.
1968-72 Oldsmobile Cutlass, 442; 8-Track Player; Inner Knob
Reproductions under dash 8-Track player die-cast inner knobs. They are identical to the originals that GM produced for 1968-72 Oldsmobile Cutlass and 1969-71 Oldsmobile 442 models. These have the correct ribbed edges. Sold...
1969-1972 Oldsmobile Cutlass, 442, F85; Inner Radio Knob Dummy Bezel
1969-1972 Oldmobile Cutlass, 442, F85 chrome inner radio knob dummy bezel. It has a locking pin. Replaces GM part # 402074
1968-69 Oldsmobile Cutlass, 442, Cutlass Supreme; Antenna Tip
Reproduction OE antenna mast tip for 1968-69 Oldsmobile Cutlass, Cutlass Supreme and 442 models. This is the screw on hexagon shaped tip for the fender mounted radio antenna. Add this finishing touch to the restoration.
1967-69 Oldsmobile Cutlass, 442; Bezel; Nut; Fender Mounted Antenna
New reproduction radio antenna bezel/nut for 1967-69 Oldsmobile Cutlass and 442 models. This if for fender a mounted antenna. It is both the bezel and nut and is threaded on the inside to mount the antenna also.
1965-1975 Buick, Chevrolet, Pontiac, Oldsmobile, Radio Antenna Grounding Plate; Bronze; Front
Reproduction of the original radio antenna grounding plate for use with various 1965-75 GM models. Often referred to as a bezel or ring, this special bronze radio grounding plate mounts on the underside of the front fender...
1967-75 GM; Front Fender Mount Antenna Chrome Bezel ; Various Models
Reproduction of the original fender mounted chrome antenna bezel designed for use on various GM models. Manufactured in die-cast zinc to factory dimensions featuring brightly polished triple chrome plating. This chrome bezel...
Universal-fit, service replacement antenna for classic or late model vehicles with power antenna option. Each motor is mounted directly to the mast assembly and is designed to mount with the universal-fit bracket and 160 inch...
1968-72 Oldsmobile Cutlass; 8 Track Housing; W/Bracket
Reproduction of the correct 8-track plastic housing for 68-72 Oldsmobile Cutlass and 442 models. Fits under the dash, this housing comes complete with the mounting brackets. Looks and functions 100% like GM with correct...
1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models
Reproduction rear speaker grille for various GMmodels. Correct for 1970 Chevelle, Nova, Impala, Caprice and Monte Carlo. This speaker grill features straight sides and four built-in studs like the original. This is a...
Our Premium 5-1/2" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 100 watts peak power capacity and a frequency response of 90-13KHZ. Ultra thin design makes this...
Premium Kick Panel Speakers; 4"; 70 Watts Peak Power; Pair
Our Premium 4" round stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 70 watts peak power capacity and a frequency response of 100-13 KHZ. 2" deep design makes this speaker...
1962-77 GM Car, Truck; Front Dash Speaker; 4" x 10"; 8 -10 Ohms; Authentic Reproduction
Reproduction 4" x 10" rectangular factory style front dash speaker for various 1962-77 GM models. The GM factory began using this style of speaker in 1962. By 1968 this speaker design was commonly found in almost all GM...
1958-83 GM; Front In Dash / Rear Seat Shelf Speaker; 6" x 9"; 8-10 Ohms; Each
Reproduction 6" x 9" factory style 8-10 Ohm speaker for various 1958-83 GM models. This is an exact replica of the speaker installed by the GM factory in the dash and/or beneath the rear seat shelf, manufactured to original...
1973-89 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Rear Speaker Enclosure Retainer; Each
Reproduction of the original enclosed speaker retainer for use with various 1973-89 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models. This is the spring steel retainer that attaches the rear speaker enclosure on...
1971-78 Chevrolet, Pontiac, Oldsmobile; Radio Control Knobs; Volume and Tuning; Pair
Reproduction volume and tuning control knobs for 1971-78 General Motors factory radios. Each knob features the correct radio tuning symbol and music note markings as shown. Manufactured in injection molded ABS with correct...
Reproduction of the original 4" x 6" front kick panel speaker and in-dash speaker for various 1965-93 GM models with a factory 4-speaker stereo system that requires a 8-10 OHM speaker. Each speaker is manufactured to the...
Radio Installation Nuts; 7/16"-28 thread x 1/8" thick; Pair
Correct mounting nuts used to hold the radio in place on most GM applications. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts.
1968-69 Oldsmobile Cutlass, 442; Radio Delete Plate
Factory style reproduction radio delete plate for applications that were ordered without radio fort 1968-69 Oldsmobile Cutlass and 442 models. This plate is made from injection-molded ABS plastic for maximum durability. Sold...
1968 Oldsmobile Cutlass, 442, F85; Outer Radio Knobs; Black with Chrome Stripe
1968 Oldsmobile Cutlass, 442, F85 outer radio knobs. These new black knobs have a chrome stripe. You can now replace the missing or damaged radio knobs. Sold by the pair.
1968-72 Oldsmobile Cutlass, 442; 8-Track Player; Outer Knob;
Reproductions under dash 8-Track player die-cast outer knobs. They are identical to the originals that GM produced for 1968-72 Oldsmobile Cutlass and 1969-71 Oldsmobile 442 models. These have the correct ribbed edges. Sold...
Reproduction of the original style antenna mounting bezel designed for use with 1981-87 Buick Regal and 1981-88 Oldsmobile Cutlass models. Each bezel is manufactured in quality UV rated injection molded ABS. Fender mounted...
1967-1969 Oldsmobile Cutlass, Cutlass Supreme; Spacer; Antenna Ground
Reproduction antenna ground plate spacer 1967-69 Oldsmobile Cutlass, Cutlass Supreme and 442 models. Mounts under the fender to support the antenna body to the fender. Replaces GM part# 398631
1969-1972 Oldsmobile Cutlass, 442, F85; Inner Radio Knob; Bass Voice and Music
1969-1972 Oldsmobile Cutlass, 442, F85 inner radio knob. Knob embossed with Bass, Music and Voice. Chrome knob with black lettering.
1955-91 GM; Molded Fender Antenna Gasket; with Manual Antenna; 1-1/2" OD 1-1/16" ID; Various Models
Correct OER® reproduction of the original style antenna gasket found on a variety of GM vehicles equipped with fender mount AM or AM/FM manual antennas. Each gasket is manufactured to OE specifications and replaces the...
1965-72 GM; Kick Panel Speaker Grills; 6" x 9"; Pair
Speaker grills are for use with 1965-72 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. Exact duplicate of the original factory installed 6" x 9" speaker grill. Manufactured in natural steel. Sold in...
Hood Pin Kit; with Lanyard; Hair Pin Style; Universal Fit
Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. Each set uses the two piece hairpin style pins ideal for installations where a...
1969-96 GM Car & Truck; Antenna Bezel Nut; Chrome; 11/16" ID; Various Models
Reproduction of the original chrome flat style (non-domed) bezel nut designed for use on various 1969-96 GM models. This chrome antenna bezel nut is manufactured in zinc die-cast metal and chrome plated to a lusterous shine....
Hood Pin Lanyard; Plastic Coated Cable; Universal Fit
Strong and ready for installation on any vehicle requiring hood pin lanyards. This design can be used for any muscle car or classic truck that requires lanyards for hood pin retention. Plastic coated design is strong and long...
1970-92 Buick, Chevrolet, Pontiac, Oldsmobile; Antenna Cable with Windshield Antenna; Various Models
OER reproduction of the original radio antenna cable designed for various GM models including 1970-92 Camaros and Firebirds with a built in windshield antenna. This antenna cable is manufactured with stamped steel ends for an...