1974-78 Ford Mustang II; 1974-80 Pinto, Bobcat; Drop Spindle Set; Forged Steel; 2 Inch Drop; Pair
Our Mustang II drop spindles are built from forged steel and heat treated for superior strength. Designed to drop the front end approximately 2" lower than stock while maintaining stock geometry. Will fit 1974-78 Ford...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1971-73 Mustang, Cougar; Heavy-Duty Front Sway Bar Set; 1-1/8" O.D.; with Hardware
Heavy-duty replacement 1-1/8? O.D. front stabilizer bar for 1971-73 Mustang and Mercury Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit features a...
1971-73 Mustang, Cougar; Heavy-Duty Front Sway Bar Set; 1" O.D.; with Hardware
Replacement 1? O.D. front stabilizer bar for 1971-73 Mustang and Mercury Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit features a hardened,...
1964-70 Mustang, Cougar; Rear Sway Bar Kit; 3/4" Diameter
Replacement 1? O.D. rear sway bar set for 1964-70 Mustang and 1967-70 Mercury Cougar models. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. Kit includes 3/4" diameter...
1961-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Lower Control Arm Assembly; LH Or RH
Reproduction from lower control arm and ball joint assembly for various 1961-66 Ford and Mercury vehicles including Mustang, Falcon, Ranchero, and Comet. This control arm assembly is a direct fit replacement and includes the...
1966-73 Ford/Mercury; Mustang/Falcon/Cougar/Comet; Front Upper Control Arm Assembly; LH Or RH
Front upper control arm assembly for Various 1966-73 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down suspension...
1965-70 Ford Mustang; Export Brace; Chrome Plated
Correct reproduction of the original export brace for use with 1965-70 Mustang, Falcon, Comet, and Cougar models. The export brace is originally designed for use on the GT350 model. This component braces the shock towers...
1954-05 GM; Front Sway Bar End Link; 3-3/8" Spacer; LH or RH; 2 Required; GK8988
Complete replacement set designed to restore proper suspension performance by replacing the original worn bushings and hardware. Manufactured to factory specifications for durability and precise fit. Features and Benefits:...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1964-66 Mustang Leaf Spring U-Bolt
Reproduction rear leaf spring U-bolts for 1964-66 Mustang models. Two required per spring. Reproductions come with deep nuts and washers.
1967-68 Mustang, Cougar; Monte Carlo Bar; Curved; Chrome
Reproduction of the original straight Monte Carlo Bar for 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your car for improved handling. The Monte Carlo bar bolts between the two shock...
1967-73 Mustang Leaf Spring U Bolt
Reproduction of the original U-bolt designed for use on 1967-73 Muatangs. Each U-bolt is designed to replace the worn out or broken original. Includes U-Bolt and attaching deep nuts and washers. 2 U bolts required per leaf...
1961-77 Ford/Mercury; Upper Control Arm Shaft and Bushing Kit
Upper control arm shaft and bushing kit for various Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. This kit includes the shaft, bolts, and zerk fittings. Fits driver or passenger sides. 2 sets...
1964-77 Mustang, Falcon, Cougar, Comet; Upper Ball Joint; 3-Bolt ; RH or LH; Each; Various Models
Reproduction of the original style 3-bolt upper ball joint designed for use with various 1964-77 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. This ball joint attaches to the upper control arm and...
Reproduction rear leaf spring shackle designed for the rearward eyelet of the leaf spring on various 1966-71 Ford and Mercury models including Torino, Ranchero, Comet, and Falcon Wagons. This rear shackle kit includes 2...
1967-68 Mustang, Cougar; Monte Carlo Bar; Straight; Black
Reproduction of the original straight Monte Carlo Bar for use with 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your vehicle for improved handling. The Monte Carlo bar bolts between...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1966-70 Ford, Mercury; Various Models; Front Sway Bar Kit; 1" O.D.; with Hardware
Replacement 1? O.D. front stabilizer bar for various Ford & Mercury applications including Mustang, Falcon, Comet, and Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced...
Enhance the handling performance of your 1974-78 Mustang II front suspension or custom hot rod or truck equipped with Mustang II front suspension. Each set of upper and lower tubular control arms are not only stronger and...
1964-70 Mustang, Cougar; Crossmember Kit; Weld-In Mustang II Suspension Upgrade
Weld-in conversion kit designed for weld-in installation on 1964-70 Mustang and Cougar models. Improve your ride, handling, and performance with this unique Mustang II crossmember kit that converts the antiquated stock front...
Reproduction OE-style large bearing heavy duty disc brake spindles for 1970-73 Ford Mustang. They are manufactured with modern steel alloys for improved durability and strength over the original spindles. These high quality...
1964-73 Mustang, Falcon, Cougar; Leaf Spring Shackle Assembly; Rear of Rear Spring; LH or RH; Each
Reproduction of the original rear leaf spring shackle kit for 1964-73 Mustang and various other Ford and Mercury models. This rear shackle kit includes two piece shackle, four rubber bushings and two nuts. Each vehicle...
1960-73 Ford, Mercury; Front Coil Spring Perch Seat And Bushing
Heavy duty spring saddle with rubber bushings, nuts & bolts & pad for 1965-1973 Mustang. This coil spring saddle can rotate on the shaft. This allows the front suspension to align freely and as necessary. These coil spring...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1964-77 Mustang/Ford Replacement Rubber Front Upper Coil Spring Insulator
Reproduction rubber front upper coil spring isolator for 1964-73 Mustangs, 1964-65 Comet and 1964-70 Falcon. This isolator installs between the front coil spring and the shock tower reducing noise and restoring ride quality....
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1963-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Upper Control Arm Assembly; LH Or RH
Front upper control arm assembly for Various 1963-66 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
1964-70 Ford Mustang; Export Brace; Black
Correct reproduction of the original export brace for use with 1965-70 Mustang, Falcon, Comet, and Cougar models. The export brace is originally designed for use on the GT350 model. This component braces the shock towers...
1960-65 Falcon, Ranchero, Comet; Shock Tower to Firewall Export Brace; Black
Reproduction shock tower to firewall export brace originally designed for performance models. This part braces the shock towers against the firewall reducing body twist and adding additional structural integrity. Finished in...
1964-70 Mustang, Cougar; Shock Tower to Firewall Export Brace; Chrome; Show Quality
Triple plated show quality chrome sets this Restorer's Choice export brace apart from other braces on the market. This part was originally designed for the GT350 models, but will fit all Mustang models. This part braces the...
1971-73 Ford Mustang/Mercury Cougar; Monte Carlo Bar; Straight; Black
OER® Authorized reproduction of the original straight design Monte Carlo bar for 1971-73 Mustang and Cougar models. This brace is a big help in strengthening the front of your classic Mustang or Cougar for improved...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-68 Mustang, Cougar; Monte Carlo Bar; Straight; Chrome
Reproduction of the original straight chrome Monte Carlo Bar for use with 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your vehicle for improved handling. The Monte Carlo bar bolts...
1967-68 Mustang, Cougar; Monte Carlo Bar; Curved; Black
Reproduction of the original curved Monte Carlo Bar for 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your car for improved handling. The Monte Carlo bar bolts between the two shock...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4" to 4" inclusive. These heat treated washers are for general purpose and structural use. For use...
1964-66 Mustang, 1963-65 Falcon, Ranchero Comet; Front Sway Bar Kit; 1"; Includes Hardware
Replacement 1? O.D. front stabilizer bar for 1964-66 Mustang and 1963-65 Falcon, Ranchero, and Mercury Comet. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit...
1964-66 Ford / Mercury Strut Rod Bushing & Washer Set - Mustang / Falcon / Ranchero / Comet
Reproduction strut rod bushing set for various 1964-66 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. This set replaces the common wear items (bushings, spacers, and washers) used to isolate the front...
1967-70 Mustang, Cougar; Outer Shock Tower; RH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die stamped 16 gauge steel with a stronger 14 gauge inner support welded in place. Applications: 1967-1970...
1968-73 Mustang/Cougar; Hardware Set; Front of Rear Leaf Spring; Shoulder Bolt and Nut Set; Pair
Reproduction rear leaf spring bolts for 1968-1973 Ford Mustang and Mercury Cougar models. Includes 2 shoulder bolts and 2 serrated washer nuts that mount the front of the rear leaf spring to the vehicle. Replaces OE #...
1966-73 Mustang, Falcon, 1971-73 Cougar; Rear Leaf Spring Shackle Bushing; Rubber; 1/2" Bore; Each
Reproduction rear leaf spring shackle bushing for 1966-73 Ford Mustang, 1966-70 Ford Falcon, and 1971-73 Mercury Cougar models. Features a 1/2" diameter bore for proper fit. Four bushings are required per leaf spring shackle...
Manufactured in cast iron like the original 1975-80 Granada spindle, this set replaces the stock disc brake spindle on Granada and Monarch models, and is also often used to convert earlier front drum brake Ford and Mercury...
1961-1994 GM, Ford; Upper Control Arm Bushing; Front or Rear; Various Applications
Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...
1967-68 Mustang, Cougar; Complete Inner Shock Tower; Drivers Side
Reproduction stamped heavy gauge steel shock tower welded assembly for 1967-68 Mustang and Cougar models (except 428 or 429ci). Comes finished in EDP coating to protect against corrosion. Welds to the front frame rail, and...
1967-68 Mustang, Cougar; Complete Inner Shock Tower; Passenger Side
Reproduction stamped heavy gauge steel shock tower welded assembly for 1967-68 Mustang and Cougar models (except 428 or 429ci). Comes finished in EDP coating to protect against corrosion. Welds to the front frame rail, and...
1968-80 Mustang, Falcon, Ranchero, Comet; Front Lower Control Arm Assembly; RH or LH; Each
Reproduction front lower control arm and ball joint assembly for various 1968-80 Ford and Mercury models including Mustang, Falcon, Ranchero, Torino, Maverick, Granada, Cougar, and Comet models. This control arm assembly is a...
1971-73 Ford Mustang/Mercury Cougar; Firewall To Shock Tower Braces
OER® Authorized reproduction firewall-to-shock-tower brace set for 1971-73 Mustang and Cougar. Manufactured from heavy gauge stamped steel. Braces extend from the firewall across the engine bay to the shock towers. Made...
1967-70 Mustang/Cougar Outer Shock Tower, LH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die stamped 16 gauge steel with a stronger 14 gauge inner support welded in place. Applications: 1967-1970...
1966-67 Mustang, Falcon, Ranchero, Comet; Front Lower Control Arm Assembly; RH or LH; Each
Reproduction of the original style front lower control arm and ball joint assembly designed for use with various 1966-67 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. This control arm assembly is a...
1964-1966 Rear Leaf Spring U-Bolt Set ; Set of 4 ; Mustang, Falcon, Comet
Reproduction of the original U-bolts designed for use on 1964-66 Mustangs, 1964-65 Falcon and Comet models. These U-bolts are designed to replace the worn out or broken originals. Includes U-Bolt and attaching deep nuts and...
1967-70 Mustang, Cougar; Shock Tower Top Cap; LH or RH; Chrome; Each
Reproduction of the original front shock tower top cap designed for use with 1967-70 Mustang and Cougar models. Manufactured from stamped steel featuring a simple bolt-on installation. This cap is manufactured with a chrome...
1964-67 Ford/Mercury; Hardware Set; Front of Rear Leaf Spring; Shoulder Bolt and Nut Set; Pair
Reproduction of the original style rear leaf spring bolts for 1964-67 Ford Mustang and other models. Includes 2 shoulder bolts and 2 serrated washer nuts that mount the front of the rear leaf spring to the vehicle. Replaces...
1967-70 Mustang, Cougar; Shock Tower Top Cap; LH or RH; Black; Each
Reproduction of the original front shock tower top cap designed for use with 1967-70 Mustang and Cougar models. Manufactured from stamped steel featuring a simple bolt-on installation. Comes in black. Sold Individually. Two...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
19669-70 Mustang, Cougar; Firewall to Shock Tower Braces; Pair; EDP Coated
Reproduction of the original firewall-to-shock-tower brace set designed for 1967-68 Mustang and Cougar models. Manufactured from heavy gauge stamped steel replicating the original design, appearance, and fitment. Braces...
1967-68 Mustang, Cougar; Firewall to Shock Tower Braces; Pair; EDP Coated
Reproduction of the original firewall-to-shock-tower brace set designed for 1967-68 Mustang and Cougar models. Manufactured from heavy gauge stamped steel replicating the original design, appearance, and fitment. Braces...