1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
This is an OER® Authorized reproduction chrome bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This authentic reproduction bumper is manufactured to original factory...
1973-80 Chevy Pickup, Blazer, Jimmy, Suburban; Front Bumper; Chrome; w/o Impact Strip Holes
OER® Authorized reproduction of the original chrome front bumper designed for use with 1973-80 Chevrolet and GMC truck models. This quality reproduction ftont bumper is manufactured to factory specifications featuring a...
1967-70 Chevy, GM, Blazer, Jimmy, Suburban; Chrome Front Bumper; Reproduction
OER® Authorized quality reproduction of the original front bumper designed for use with 1967-70 Chevrolet and GMC truck models. Each bumper is designed and manufactured to duplicate the original in virtually every detail....
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-69 Chevy, GMC Pickup, Blazer, Suburban; Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3-piece stainless steel screw set designed for mounting the outer door side mirror arms on 1947-1972 Chevrolet and GMC pickup truck models. Each screw set is manufactured from premium stainless steel for...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
Flush mount front windshield glass for 1967-72 Chevrolet or GMC C/K-Series pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; Chrome; LH Driver Side
Upgrade the look of your 1967-72 Chevrolet or GMC truck with this custom reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped to original GM...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1973-84 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Wiper Arm; RH or LH; Each
OER® Authorized reproduction bayonet style windshield wiper arm for all 1973-84 Chevrolet & GMC truck models including Suburban, Crew Cab, Blazer, and Jimmy. Each wiper arm is manufactured to OE factory specifications in...
Reproduction front bumper guards for 1967-72 Chevrolet/GMC pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic original equipment...
1947-72 Chevy, GMC Pickup Blazer, Jimmy, Suburban; Round Door Mirror Head; Chrome; Smooth Backing
Reproduction exterior round mirror head for 1947-72 Chevrolet & GMC truck models. This reproduction mirror head is design to replace the worn out or missing original. Features a chrome backing with a 5" smooth, non-ribbed...
Reproduction outer door side mirror assembly for 1970-1972 Chevrolet and GMC trucks. Manufactured in die-cast zinc and chrome plated for an authentic look and fit. Includes mounting plate, gasket, and screws. Fits the LH...
Premier reproduction chrome rear bumper for 1981-86 Chevrolet and GMC Fleetside pickup, Blazer, Jimmy, Suburban and 1987-91 R/V pickup, Blazer, Jimmy, Suburban (R/V) models without impact strip holes. Each bumper is...
Reproduction outer door side mirror assembly for 1970-1972 Chevrolet and GMC trucks. Manufactured in die-cast zinc and chrome plated for an authentic look and fit. Includes mounting plate, gasket, and screws. Mirror head...
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
OER Premier™ reproduction chrome rear bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This reproduction rear bumper is designed exclusively for the restorer who demands...
1967-72 GMC Pickup, Jimmy, Suburban; Front Bumper; Chrome; OER Premier® "Show Quality"
OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-1972 GMC Pickup, Suburban and Jimmy models. This reproduction bumper is designed exclusively for the restorer who demands the best...
Premier reproduction chrome front bumper for 1983-86 Chevrolet and GMC C/K pickup, Blazer, Jimmy, Suburban, and 1987-91 pickup, Blazer, Jimmy, Suburban R/V models including crew cab, and dually models. This excellent...
Premier reproduction chrome front bumper for 1983-86 Chevrolet and GMC C/K pickup, Blazer, Jimmy, Suburban, and 1987-91 pickup, Blazer, Jimmy, Suburban R/V models including crew cab, and dually models. This excellent...
1981-91 Chevy, GMC Fleetside Pickup, Blazer, Suburban; Chrome Rear Bumper; with Impact Strip Holes
Reproduction of the original style chrome rear bumper for 1981-86 Chevrolet & GMC Fleetside (C/K) pickup, Blazer, Jimmy, Suburban, and 1987-91 Pickup (R/V), Blazer, Jimmy, and Suburban models with impact strip holes. Each...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 GMC Pickup, Suburban, Jimmy; Chrome Front Bumper
Reproduction of the original front bumper designed for use with 1967-72 GMC pickup, Suburban, and Jimmy models. Each bumper is manufactured to replicate the original with the "notches/cutouts" below the park lamps. Features a...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Green Tint; w/o Band
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Clear
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; RH Passenger Side
Restore the factory look of your 1967-72 Chevrolet or GMC truck with this premium reproduction inner front fender skirt. Designed for Pickup, Blazer, Jimmy, and 1967 Suburban models, this panel is precisely stamped from...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Spring; Each; Made in the USA!
Correct reproduction of the original hood hinge spring designed for use on 1973-80 Chevrolet and GMC truck models. Each spring is manufactured to OE specifications and features the correct tension ratio, offering the highest...
1973-91 Chevrolet Blazer, GMC Jimmy; Rear Window Glass; Dark Gray Privacy Tint
Reproduction of the original back window glass for 1973-91 Chevy Blazer or GMC Jimmy models. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace your missing, scratched or broken...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; Door Latch Assembly; LH Driver Side
Reproduction door latch designed for use with 1967-72 Chevrolet and GMC truck models. Each latch is manufactured to precise factory specifications, accurately replicating the original in design, appearance, and fitment....
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; LH Driver Side
Bring back the authentic factory look of your 1967-72 Chevrolet or GMC truck with this high-quality reproduction inner front fender skirt. Designed to fit Pickup, Blazer, Jimmy, and Suburban models, this panel is...
1973-91 Chevrolet Blazer, GMC Jimmy; Rear Window Glass; Clear
Reproduction of the original back window glass for 1973-91 Chevy Blazer or GMC Jimmy models. Manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace your missing, scratched or broken...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1973-80 Fleetside, Suburban, Blazer, Jimmy; Rear Bumper; Black Powdercoat; w/o Impact Strip Holes
Reproduction of the original chrome rear bumper designed for use with 1973-80 Chevrolet and GMC Fleetside pickup trucks, Chevy Blazer, GMC Jimmy, and all Suburban models. Each bumper is manufactured to original factory...
1973-80 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Hood Hinge Assembly; LH Driver Side
Reproduction of the original hood hinge assembly for 1973-80 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models. Each hood hinge is manufactured from quality stamped steel assuring a quality replacement. This hood...
1967-72 Chevy, GMC Pickup. Blazer, Jimmy, Suburban; Windshield Wiper Motor Transmission Arm Assembly
Reproduction windshield wiper motor transmission arm assembly for 1967-1972 Chevrolet and GMC truck models. Each assembly is manufactured to original GM specifications, replicating the factory design, quality, and fitment. A...
1969-72 Chevy Blazer, GMC Jimmy; Rocker Box; with Bracing; RH Passenger Side
Reproduction of the original rocker box for 1969-72 Blazer and 1970-72 Jimmy models. Each rocker box is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1969-72 Chevy Blazer, GMC Jimmy; Rocker Box; with Bracing; LH Driver Side
Reproduction of the original rocker box for 1969-72 Blazer and 1970-72 Jimmy models. Each rocker box is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
1981-91 Chevy, GMC; Fleetside Pickup; Tailgate Latch Set; 11 Piece Set
Reproduction tailgate latch components for 1981-86 Chevrolet and GMC Fleetside C/K, 1987-91 Chevrolet and GMC Fleetside pickup R/V models, and 1981 Blazer and Jimmy models (without removable hardtop). This convenient set...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction of the original style low mount outer door mirror for 1973-87 Chevrolet and GMC Pickup, Blazer, Jimmy and Suburban models. The stainless steel mirror head measures 9" x 6-1/2". Fits left hand (driver side) or...
OER reproduction of the original front windshield glass for Chevrolet S10 and GMC S15 Sonoma, Blazer, and Jimmy models. This windshield is manufactured with tempered laminate safety glass that meets the standard for...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
OER® Authorized reproduction front door latch designed for use with all 1973-81 Chevrolet and GMC C/K pickup, Suburban, Blazer, and Jimmy models, as well as early 1982 models equipped with the "first design" door latch...
Restore the OE look of your 1981-91 Chevrolet or GMC truck with this high-quality reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped from durable...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models with a built-in antenna. This windshield is manufactured with tempered laminate safety glass...
Reproduction of the front windshield glass for various 1973-91 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban truck models without a built-in antenna. This windshield is manufactured with tempered laminate safety glass...