1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1969-72 Blazer, Jimmy, Suburban; Fuel Tank; 20 Gallon; Zinc Coated
Reproduction fuel tank for 1969-72 Chevrolet Blazer and 1970-72 GMC Jimmy models. This tank is direct-fit for Blazer and Jimmy without any modifications required. Will also fit Suburban with slight modification of filler...
1974-81 Chevrolet, GMC Suburban; Zinc Coated Fuel Tank; 40 Gallon Tank
Reproduction of the original fuel tank designed for various 1974-81 Chevrolet and GMC Suburban models. This fuel tank is made of zinc coated steel and measures 35" x 28 3/4" x 13 1/8". This fuel tank has a capacity of 40...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1973-81 Chevy, GMC Blazer, Jimmy, Suburban; Zinc Coated Fuel Tank; 31 Gallon Tank
Correct reproduction of the original fuel tank designed for with 1973-81 Chevrolet and GMC Blazer, Jimmy, and Suburban models. This reproduction fuel tank is manufactured in stamped steel featuring a heavy zinc coating for...
1967-70 Chevrolet/GMC Truck, Blazer. Suburban; Standard Accelerator Pedal Pad
Reproduction accelerator pedal pad for 1967-70 Chevrolet & GMC pickup. Blazer, Jimmy, and Suburban models with standard interiors. Each pad is manufactured in injection molded ABS material to original specifications and...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1991 Chevrolet Blazer, Suburban, and, GMC Jimmy, Suburban models with 31 gallon fuel tank. Each strap is manufactured in quality stamped steel,...
Reproduction fuel tank mounting straps for 1967-72 Chevrolet and GMC Pickup truck, Blazer, Jimmy, and Suburban models. Each strap is manufactured in quality stamped steel. Comes with a black EDP Coating for rust and corrosion...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1974-81 Outer Accelerator Pull Spring
Correct reproduction of the commonly missing or worn out outer accelerator pull spring which mounts between the carburetor and water neck and helps to return the throttle to the closed position. Manufactured to exact factory...
1973-77 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Fuel Tank Vent Hose; 1/2" ID x 18" Long
Reproduction fuel tank vent hose for 1973-77 Blazer, Jimmy, and Suburban. This hose measures 18" long with a 1/2" inside diameter to fit the first design fuel filler necks with 1/2" vent pipe.
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Reproduction clips used to mount the fuel line to the frame. Includes six 3/8" clips. Applications: 1967-69 Chevrolet Camaro - Big Block 1967-69 Chevrolet Camaro - Small Block w/4bbl 1965-86 Chevrolet/GMC Truck 1965-70...
Reproduction of the original fuel tank assembly designed for use with 1973-81 Chevrolet, GMC Blazer, Jimmy, Suburban, and 1975-80 Pickupo truck models. Each tank is manufactured in stamped steel and zinc coated for long...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1967-72 Chevy Pickup, Blazer, Jimmy, Suburban; Fuel Tank Sending Unit; 3/8" Line; 90 Ohm
Reproduction fuel tank sending unit for 1969-72 Chevrolet and GMC Blazer, Jimmy, and 1967-72 Suburban models with 3/8" line. Also works with our 1967-72 C/K pickup fuel tank relocation kits that replace the cab tank to a side...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1973-78 Chevy, GMC, Blazer, Jimmy; Fuel Filler Neck
Reproduction fuel filler neck for 1973-77 Chevrolet Blazer and GMC Jimmy models. This first design filler neck has a 1-1/4" outside diameter main outlet with a 1/2" outside diameter vent pipe. Each fuel tank neck is...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Reproduction of the original fuel tank mounting straps designed for use with 1973-1987 Chevrolet and GMC pickup truck models with 25 gallon rear mounted fuel tank. Each strap is manufactured in quality stamped steel,...
1974-91 Chevrolet, GMC Suburban; Fuel Tank Mounting Straps; with 40 Gallon Tank; Pair
Reproduction of the original fuel tank mounting straps designed for use with 1974-1991 Chevrolet, GMC Suburban models with 40 gallon fuel tank. Each strap is manufactured in quality galvanized stamped steel. If you are...
1973-81 Blazer, Jimmy, Suburban; Fuel Filler Hose
Reproduction fuel tank filler hose for 1973-81 Chevrolet and GMC Blazer, Jimmy, and Suburban models. Measures: 1.25" ID x 14" Long. Chevrolet Applications: 1973-1981 Chevrolet Blazer 1973-1981 Chevrolet Suburban GMC...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1962-81 GM; Fuel Tank Sending Unit Lock Ring; Small; 1-15/16"; Various Models
Correct reproduction fuel tank sending unit locking ring which secures the fuel tank sending unit to the gas tank. Replaces the original ring which are commonly destroyed when being removed. This ring helps to seal the...
1964-71 Chevrolet, GMC; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Car & Truck Models
Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Each trim plate is manufactured in stamped stainless offering long lasting dependability and an authentic appearance. This...
1969-81 GM; Fuel and Brake Line Clip; Dual Line 3/8" & 1/4"; Each
This correct reproduction line clip is designed for securing fuel and brake lines to the frame on a variety of GM models. Manufactured from durable galvanized steel, this clip is engineered to accept one 3/8 inch and one 1/4...
1974-91 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Accelerator Pedal Pad
Reproduction pedal for 1974-86 C/K and 1987-91 R/V Chevrolet and GMC models. Each accelerator pad is manufactured in injection molded ABS that replicates the original in fit and design. Features correct horizontal ribbed...
1964-71 Chevrolet; Floor Mounted Accelerator Pedal Pad; Rubber; with Steel Insert; OEM Reproduction
Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Each accelerator pedal pad is manufactured in quality hard EPDM rubber unlike the plastic service replacement...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models
Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal...
1969-81 GM; Fuel & Brake Line Clip Set; Dual Line 3/8" and 1/4"; 7 Piece Set
This correct reproduction line clip is designed for securing fuel and brake lines to the frame on a variety of GM models. Manufactured from durable galvanized steel, this clip is engineered to accept one 3/8 inch and one 1/4...
1968-79 Accelerator Control Cable Retainer ; Various Models
OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...
1967-78 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1961-81 GM; Fuel Tank Sending Unit Gasket; Small; 1-13/16 ID; Various Models
Correct replacement fuel tank sending unit gasket for various 1961-81 Buick, Chevrolet, Oldsmobile and Pontiac models. This gasket installs between the sending unit and the locking ring. Gasket is manufactured to correct...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6.