OER Authorized sliding rear window to fit 1988-99 Chevrolet/GMC C/K pickup models. Features a three panel design, self-locking latch, and a slim line frame to enhance visibility. Aluminum frames feature a powder coated...
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
This is an OER® Authorized reproduction chrome bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This authentic reproduction bumper is manufactured to original factory...
1973-80 Chevy Pickup, Blazer, Jimmy, Suburban; Front Bumper; Chrome; w/o Impact Strip Holes
OER® Authorized reproduction of the original chrome front bumper designed for use with 1973-80 Chevrolet and GMC truck models. This quality reproduction ftont bumper is manufactured to factory specifications featuring a...
OER Authorized sliding rear window to fit 1973-86 Chevrolet/GMC C/K and 1987-91 R/V pickup truck models. Features a three panel design, self-locking latch, and a slim line frame to enhance visibility. Aluminum frames feature...
1967-70 Chevy, GM, Blazer, Jimmy, Suburban; Chrome Front Bumper; Reproduction
OER® Authorized quality reproduction of the original front bumper designed for use with 1967-70 Chevrolet and GMC truck models. Each bumper is designed and manufactured to duplicate the original in virtually every detail....
1967-87 Chevrolet, GMC Stepside Pickup Truck; Chrome Rear Bumper
Reproduction of the original chrome rear bumper designed for use with 1967-87 Chevrolet and GMC Stepside pickup truck models. Each bumper is manufactured to original factory specifications replicating the original in design,...
1955-59 Chevrolet, GMC Pickup Truck; Front Windshield Glass; Clear
Reproduction of the original front non-tinted windshield glass designed for use with 1955-59 Chevrolet and GMC pickup truck models. Each glass is manufactured to correct dimensions using quality tempered laminated safety...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Driving & Fog Lamps; With Dual Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; with Dual Insert & Fog Lights; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Driving & Fog Lamps; With Single Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; with Driving; with Fog Lamps; without Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
Reproduction stamped steel rear bumper center section for the rear of Chevrolet Cameo and Chevrolet Suburban trucks. This center panel assembly features the outer center rear bumper panel, and inner bumper pan, with a spare...
1947-69 Chevy, GMC Pickup, Blazer, Suburban; Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3-piece stainless steel screw set designed for mounting the outer door side mirror arms on 1947-1972 Chevrolet and GMC pickup truck models. Each screw set is manufactured from premium stainless steel for...
1988-98 Chevrolet, GMC Truck; Front Bumper; without Lights; with Single Insert; Chrome
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is triple chrome plated to the highest standards for a show quality chrome...
1988-98 Chevrolet, GMC Truck; Front Bumper; with Driving & Fog Lamps; with Single Insert; Paintable
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade for 2nd design 1955 models and all 1956-59 Chevrolet and GMC truck models. Also correct as a replacement for a wide range of other makes and models, including 1955-57 GM passenger models...
Flush mount front windshield glass for 1967-72 Chevrolet or GMC C/K-Series pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer...
Flush mount front windshield glass for 1973-86 C/K and 1987-91 R/V, Chevrolet or GMC pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate...
1955-58 Chevy Cameo, GMC Suburban Carrier Pickup; Rear Chrome Bumper End; RH Passenger Side
Reproduction stamped steel bumper ends for the rear of Chevrolet Cameo and Chevrolet Suburban Carrier pickup trucks. Finally, the steel rear bumper ends are available after being obsolete for decades. Produced in steel...
1955-58 Chevy Cameo, GMC Suburban Carrier Pickup; Rear Chrome Bumper End; LH Driver Side
Reproduction stamped steel bumper ends for the rear of Chevrolet Cameo and GMC Suburban Carrier pickup trucks. Finally, the steel rear bumper ends are available after being obsolete for decades. Produced in steel contruction...
Reproduction rear step bumper for 2011-14 Chevrolet/GMC 2500HD, 3500 (GMT900 Series) fleetside single rear wheel models with parking assist option. Each step bumper is equipped with a molded polymer step pad on the top bumper...
Reproduction rear step bumper for 2007-13 Chevrolet/GMC GMT900 Series fleetside 1500 models with parking assist option. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip...
1947-53 Chevrolet, GMC Truck; 1 Piece Windshield Glass With Seal; Gray Tinted With Darker Gray Shade
Replace the outdated 2-piece windshield in your 1947-53 truck with a one-piece windshield manufactured utilizing molded laminate safety glass. To install this glass, you must cut out the center divider bar that your truck was...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each
Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Driving; With Fog Lamps; Without Insert; Painted
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
1951-55 Chevrolet, GMC Truck, Vent Window Assembly; with Chrome Division Bar; Tinted Glass; LH
Reproduction of the original door vent window assembly for 1951-55 Chevrolet and GMC truck models. Each glass assembly is manufactured to OE specifications replicating the original in quality, fitment, and design. This vent...
1947-53 Chevy, GMC Pickup Truck; Hood Latch Panel; Stainless Steel; Mirror Chrome Finish
Reproduction hood latch panel for 1947-54 Chevrolet, GMC pickup truck models. Each hood latch panel is manufactured to OE specifications in stainless steel with a bright mirror chrome plated finish for a custom appearance....
1960-63 Chevy, GMC Pickup, Suburban; Windshield Glass; Gray Tinted Without Shade
Reproduction curved front windshield glass for 1960-63 Chevrolet and GMC pickup, and Suburban models as listed. Windshields are manufactured using tempered laminate safety glass designed for protection against road debris....
1960-66 Chevy, GMC Pickup, Panel, Suburban; Door Check Assembly; LH or RH; Each
OER® Authorized reproduction door check for 1960-66 Chevrolet & GMC model trucks. Designed to prevent the door from opening too far, this reproduction is precision manufactured for an exact replacement of the original...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1988-98 Chevrolet, GMC Truck; Front Bumper; Without Lights; With Single Insert; Painted
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is edp coated and paintable. Features all original style contours, factory...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; Chrome; LH Driver Side
Upgrade the look of your 1967-72 Chevrolet or GMC truck with this custom reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped to original GM...
1988-98 Chevrolet, GMC Truck; Front Bumper; With Fog Lamps & License Holes; Paintable
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
1988-98 Chevrolet, GMC Truck; Front Bumper; Standard With Fog Lights & Without Inserts; Paintable
OER Premier: custom front bumper for 1988-98 Chevrolet trucks and 1988-98 GMC truck models. Manufactured from custom special tooling, each bumper is EDP coated and paintable. Features all original style contours, factory...
1969-72 El Camino; 1971-72 Sprint; Tailgate Shell; Replaces GM#"s 8728837, 8761259, 9862703
This tailgate shell assembly is a high quality reproduction part built to replace the original tailgate on 1969-72 El Camino and 1971-72 GMC Sprint models. Each tailgate shell is manufactured to factory specifications...
Reproduction rear step bumper for 2007-10 Chevrolet/GMC 3500 (GMT900 Series) fleetside dually rear wheel models without parking assist option. Each step bumper is equipped with a molded polymer step pad on the top bumper...
Reproduction rear step bumper for 2011-14 Chevrolet/GMC 2500HD, 3500 (GMT900 Series) fleetside single rear wheel models with parking assist option. Each step bumper is equipped with a molded polymer step pad on the top bumper...
Reproduction rear step bumper for 1988-00 Chevrolet/GMC C/K GMT400 series fleetside pickup. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when using the bumper as a...
1963-66 Chevy, GMC Pickup, Blazer Suburban; Front Bumper; Chrome; Reproduction
OER reproduction of the original front bumper designed for use with 1963-66 Chevrolet and GMC Pickup, Panel and Suburban models. Each bumper is manufactured to duplicate the original in virtually every detail. Will fit and...
Reproduction rear step bumper for 1988-00 Chevrolet/GMC C/K GMT400 series stepside pickup. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when using the bumper as a...
1960-63 Chevy, GMC Pickup, Suburban; Windshield Glass; Gray Tinted With Dark Gray Shade
Reproduction curved front windshield glass for 1960-63 Chevrolet and GMC pickup, and Suburban models as listed. Windshields are manufactured using tempered laminate safety glass designed for protection against road debris....
1999-07 Chevy Silverado, GMC Sierra; Fleetside; Rear Step Bumper; with Brackets; Chrome
Reproduction rear step bumper for 1999-06 Chevrolet/GMC GMT800 Series fleetside 1500 and 2500 Light Duty Silverado/Sierra models and 2007 Classic Series GMT800 models. Each chrome step bumper is equipped with a molded polymer...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1973-84 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Wiper Arm; RH or LH; Each
OER® Authorized reproduction bayonet style windshield wiper arm for all 1973-84 Chevrolet & GMC truck models including Suburban, Crew Cab, Blazer, and Jimmy. Each wiper arm is manufactured to OE factory specifications in...
1960-66 Chevy, GMC Truck; Windshield Wiper Blade; with Red Dot Push Button; 13" Long; Each
Reproduction "Red Dot" style 13" windshield wiper blades for 1960-66 Chevrolet and GMC truck and a variety of other models. Each blade features polished stainless steel construction and accepts a 3/16" narrow-style bayonet...
1963-66 Chevy, GMC Fleetside Pickup Truck; Chrome Rear Bumper; with License Hole; OER premier™
OER Premier® reproduction of the original chrome rear bumper for 1963-66 Chevrolet & GMC Fleetside pickup truck models. Each bumper is manufactured to correct factry specifications offering an authentic replacement of the...
Reproduction rear step bumper for 2007-13 Chevrolet/GMC GMT900 Series fleetside 1500 models with parking assist option. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip...
1960-66 Chevrolet, GMC Pickup; Stepside; Chrome Rear Bumper; Show Quality
OER Premier® reproduction of the original chrome rear bumper designed for use with 1960-66 Chevrolet and GMC Stepside Pickup truck models. Each bumper is manufactured to OE specifications replicating the original in...
Reproduction body mounting set for 1988-98 Chevrolet/GMC extended cab pickup. Each 34-piece kit includes rubber radiator core support bushings, rubber cab mounting bushings, and associated hardware. Note: Bed mounting bolt...
Reproduction rear step bumper for 1999-07 Chevrolet/GMC Silverado/Sierra 1500 and Light Duty 2500 fleetside models. Each step bumper is equipped with a molded polymer step pad on the top bumper surfaces for a better grip when...
1967-87 Chevy, GMC Stepside Pickup; Rear Bumper; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome rear bumper designed for use on 1967-1987 Chevrolet and GMC Pickup truck models. This reproduction bumper is designed exclusively for the restorer who demands the best...