1964-66 Mustang; Deluxe Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1967 Deluxe Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1967 Mustang; Standard Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1971-73 Mustang, Cougar; Heavy-Duty Front Sway Bar Set; 1-1/8" O.D.; with Hardware
Heavy-duty replacement 1-1/8? O.D. front stabilizer bar for 1971-73 Mustang and Mercury Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit features a...
1971-73 Mustang, Cougar; Heavy-Duty Front Sway Bar Set; 1" O.D.; with Hardware
Replacement 1? O.D. front stabilizer bar for 1971-73 Mustang and Mercury Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit features a hardened,...
1964-70 Mustang, Cougar; Rear Sway Bar Kit; 3/4" Diameter
Replacement 1? O.D. rear sway bar set for 1964-70 Mustang and 1967-70 Mercury Cougar models. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. Kit includes 3/4" diameter...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 39-1/4" Wide; For Narrowed Crossmember
Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...
1961-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Lower Control Arm Assembly; LH Or RH
Reproduction from lower control arm and ball joint assembly for various 1961-66 Ford and Mercury vehicles including Mustang, Falcon, Ranchero, and Comet. This control arm assembly is a direct fit replacement and includes the...
1966-73 Ford/Mercury; Mustang/Falcon/Cougar/Comet; Front Upper Control Arm Assembly; LH Or RH
Front upper control arm assembly for Various 1966-73 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down suspension...
1965-1970 Mustang, Rear Shock Mount Panel; EDP Coated
Reproduction or the rear shock mount panel section designed for use with 1965-70 Mustang models. Each shock panel is manufactured in quality stamped steel to original factory specifications. This panel was only available with...
1965-70 Ford Mustang; Export Brace; Chrome Plated
Correct reproduction of the original export brace for use with 1965-70 Mustang, Falcon, Comet, and Cougar models. The export brace is originally designed for use on the GT350 model. This component braces the shock towers...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1964-66 Mustang Leaf Spring U-Bolt
Reproduction rear leaf spring U-bolts for 1964-66 Mustang models. Two required per spring. Reproductions come with deep nuts and washers. {Fitment} {specs}
1964-66 Ford Mustang; Outer Shock Tower; LH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die-stamped 16 gauge steel with a stronger 14 gauge inner support welded in place.
1964-66 Ford Mustang; Outer Shock Tower; RH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die-stamped 16 gauge steel with a stronger 14 gauge inner support welded in place.
1967-68 Mustang, Cougar; Monte Carlo Bar; Curved; Chrome
Reproduction of the original straight Monte Carlo Bar for 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your car for improved handling. The Monte Carlo bar bolts between the two shock...
1967-73 Mustang Leaf Spring U Bolt
Reproduction of the original U-bolt designed for use on 1967-73 Muatangs. Each U-bolt is designed to replace the worn out or broken original. Includes U-Bolt and attaching deep nuts and washers. 2 U bolts required per leaf...
1961-77 Ford/Mercury; Upper Control Arm Shaft and Bushing Kit
Upper control arm shaft and bushing kit for various Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. This kit includes the shaft, bolts, and zerk fittings. Fits driver or passenger sides. 2 sets...
1964-77 Mustang, Falcon, Cougar, Comet; Upper Ball Joint; 3-Bolt ; RH or LH; Each; Various Models
Reproduction of the original style 3-bolt upper ball joint designed for use with various 1964-77 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. This ball joint attaches to the upper control arm and...
1967-68 Mustang, Cougar; Monte Carlo Bar; Straight; Black
Reproduction of the original straight Monte Carlo Bar for use with 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your vehicle for improved handling. The Monte Carlo bar bolts between...
1964-66 Ford Mustang; Shock Tower Patch Panel; LH Or RH
This OER® Authorized panel is needed to repair the lower shock towers where they attach to the frame rail. Made in USA Sold individually. Fits left hand (driver side) or right hand (passenger side). Application Notes: May...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1964-70 Mustang, Cougar; Crossmember Kit; Weld-In Mustang II Suspension Upgrade
Weld-in conversion kit designed for weld-in installation on 1964-70 Mustang and Cougar models. Improve your ride, handling, and performance with this unique Mustang II crossmember kit that converts the antiquated stock front...
1968-73 Deluxe Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1964-66 Mustang; Standard Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1968-73 Ford Mustang; Standard Front Suspension Kit
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1964-66 Mustang; Front Sway Bar Kit; 1-1/8"; with Hardware
Reproduction of the original sway bar desinged specifically for 1964-66 Mustangs. The sway bar limits body roll during cornering, making your Mustang handle better and corner with more control. This kit includes a 1 1/8" O.D....
1967-70 Mustang; Front Sway Bar Kit; 1-1/8"; Small Block Models
Reproduction of the original sway bar desinged specifically for 1967-70 Mustangs. The sway bar limits body roll during cornering, making your Mustang handle better and corner with more control. This kit includes a 1 1/8" O.D....
1966-70 Ford, Mercury; Various Models; Front Sway Bar Kit; 1" O.D.; with Hardware
Replacement 1? O.D. front stabilizer bar for various Ford & Mercury applications including Mustang, Falcon, Comet, and Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced...
Reproduction OE-style large bearing heavy duty disc brake spindles for 1970-73 Ford Mustang. They are manufactured with modern steel alloys for improved durability and strength over the original spindles. These high quality...
1964-73 Mustang, Falcon, Cougar; Leaf Spring Shackle Assembly; Rear of Rear Spring; LH or RH; Each
Reproduction of the original rear leaf spring shackle kit for 1964-73 Mustang and various other Ford and Mercury models. This rear shackle kit includes two piece shackle, four rubber bushings and two nuts. Each vehicle...
1960-73 Ford, Mercury; Front Coil Spring Perch Seat And Bushing
Heavy duty spring saddle with rubber bushings, nuts & bolts & pad for 1965-1973 Mustang. This coil spring saddle can rotate on the shaft. This allows the front suspension to align freely and as necessary. These coil spring...
1964-77 Mustang/Ford Replacement Rubber Front Upper Coil Spring Insulator
Reproduction rubber front upper coil spring isolator for 1964-73 Mustangs, 1964-65 Comet and 1964-70 Falcon. This isolator installs between the front coil spring and the shock tower reducing noise and restoring ride quality....
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1963-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Upper Control Arm Assembly; LH Or RH
Front upper control arm assembly for Various 1963-66 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1964-70 Ford Mustang; Export Brace; Black
Correct reproduction of the original export brace for use with 1965-70 Mustang, Falcon, Comet, and Cougar models. The export brace is originally designed for use on the GT350 model. This component braces the shock towers...
1964-70 Mustang, Cougar; Shock Tower to Firewall Export Brace; Chrome; Show Quality
Triple plated show quality chrome sets this Restorer's Choice export brace apart from other braces on the market. This part was originally designed for the GT350 models, but will fit all Mustang models. This part braces the...
1964-66 Ford Mustang; Monte Carlo Bar; Curved; Chrome
Reproduction of the original curved design Monte Carlo bar for 1964-66 Mustang models. This brace is a big help in strengthening the front of your classic Mustang for improved handling. The Monte Carlo bar bolts between the...
1971-73 Ford Mustang/Mercury Cougar; Monte Carlo Bar; Straight; Black
OER® Authorized reproduction of the original straight design Monte Carlo bar for 1971-73 Mustang and Cougar models. This brace is a big help in strengthening the front of your classic Mustang or Cougar for improved...
1964-66 Mustang Cobra Monte Carlo Bar (Curved) Black
Reproduction of the original curved design Monte Carlo bar for 1964-66 Mustang models. This brace is a big help in strengthening the front of your classic Mustang for improved handling. The Monte Carlo bar bolts between the...
1964-66 Mustang; Monte Carlo Bar; Straight; Chrome
Reproduction of the original straight design Monte Carlo bar for 1964-66 Mustang models. This brace is a big help in strengthening the front of your classic Mustang for improved handling. The Monte Carlo bar bolts between the...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-68 Mustang, Cougar; Monte Carlo Bar; Straight; Chrome
Reproduction of the original straight chrome Monte Carlo Bar for use with 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your vehicle for improved handling. The Monte Carlo bar bolts...
1964-66 Ford Mustang; Monte Carlo Bar; Straight; Black
Reproduction of the original straight design Monte Carlo bar for 1964-66 Mustang models. This brace is a big help in strengthening the front of your classic Mustang for improved handling. The Monte Carlo bar bolts between the...
1964-66 Ford Mustang; Shock Tower Top Cap; LH Or RH; Black
1964-66 Mustang stamped steel front shock tower top cap. Simple bolt-on installation. Comes in black. Sold Individually. Two required per vehicle. Note: We highly recommend using a thread-chasing tool to clean paint out of...
1967-68 Mustang, Cougar; Monte Carlo Bar; Curved; Black
Reproduction of the original curved Monte Carlo Bar for 1967-68 Mustang or Cougar models. This bar is essential in strengthening the front of your car for improved handling. The Monte Carlo bar bolts between the two shock...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4? to 4? inclusive. These heat treated washers are for general purpose and structural use. For use...
1964-66 Mustang, 1963-65 Falcon, Ranchero Comet; Front Sway Bar Kit; 1"; Includes Hardware
Replacement 1? O.D. front stabilizer bar for 1964-66 Mustang and 1963-65 Falcon, Ranchero, and Mercury Comet. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit...
1964-66 Ford / Mercury Strut Rod Bushing & Washer Set - Mustang / Falcon / Ranchero / Comet
Reproduction strut rod bushing set for various 1964-66 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. This set replaces the common wear items (bushings, spacers, and washers) used to isolate the front...
1964-66 Mustang; Shock Tower Top Cap; Chrome; RH or LH; Each
Reproduction of the original shock tower top cap designed for use with 1964-66 Mustang models. This cap is manufactured in stamped steel featuring a brightly polished chrome plated finish. Simple bolt-on installation. Fits RH...
1967-70 Mustang, Cougar; Outer Shock Tower; RH
The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die stamped 16 gauge steel with a stronger 14 gauge inner support welded in place. Applications: 1967-1970...
1967-73 Mustang Rear Leaf Spring U-Bolt Set ; Set of 4
Reproduction of the original U-bolts designed for use on 1967-73 Muatangs. These U-bolts are designed to replace the worn out or broken originals. Includes U-Bolt and attaching deep nuts and washers. This set includes 4...
1968-73 Mustang/Cougar; Hardware Set; Front of Rear Leaf Spring; Shoulder Bolt and Nut Set; Pair
Reproduction rear leaf spring bolts for 1968-1973 Ford Mustang and Mercury Cougar models. Includes 2 shoulder bolts and 2 serrated washer nuts that mount the front of the rear leaf spring to the vehicle. Replaces OE #...
1964-73 Rear Leaf Spring Bushing; 1/2" ; Each
OER reproduction of the original rear leaf spring bushing designed for use on various Ford models including 1965-73 Mustangs. Features a 1/2" inch diameter bore. 4 required per leaf spring. 8 required per vehicle. Sold...