3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1964-66 Mustang; Front Bumper Guards; Pair
Quality reproduction of the original chrome front bumper guards designed for use with 1964-66 Mustang models. Each bumper guard is manufactured in stamped steel and triple chrome plated for a lusterous appearance. Sold in...
1979-93 Mustang; Rear Bumper Reinforcement
Reproduction rear bumper reinforcement for 1979-93 Mustang models. Manufactured to factory specifications for proper fitment and function. Comes with EDP coating for rust and corrosion prevention. Note: Ships Double Oversize.
1965-66 Ford Mustang; Outer Front Bumper Mounting Bracket; without Shelby; RH Passenger Side
Reproduction stamped steel bumper bracket for 1965-66 Mustang. This front bumper bracket is accurately produced to fit the RH (passenger side) outer position on a 1965-66 Mustang. Comes finished in a black EDP coating to...
1965-66 Ford Mustang; Outer Front Bumper Mounting Bracket; without Shelby; LH Driver Side
Reproduction stamped steel bumper bracket for 1965-66 Mustang. This front bumper bracket is accurately produced to fit the LH drivers side outer position on a 1965-66 Mustang. Comes finished in a black EDP coating to protect...
1964-66 Ford Mustang; Bumper End To Fender Bracket; RH
Reproduction fender to bumper end bracket for 1964-66 Mustang models. This bracket connects the front fender to the corner side of the front bumper. Produced in stamped steel with EDP coating to prevent corrosion.
1964-66 Ford Mustang; Bumper End To Fender Bracket; LH
Reproduction fender to bumper end bracket for 1964-66 Mustang models. This bracket connects the front fender to the corner side of the front bumper. Produced in stamped steel with EDP coating to prevent corrosion.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1967-68 Mustang; Front Bumper Guard Set; Chrome; Pair
Reproduction of the original 1967-68 front bumper guard for use with 1967-68 Mustang without rubber pad. This is a direct fit replacement of the original bumper guards. Bumper guards are manufactured to OE specifications...
1967-68 Ford Mustang; Rear Bumper Mounting Bracket; LH Or RH
Reproduction of the original rear bumper bracket that connects the rear tail light panel and the rear bumper. Manufactured from high quality steel and coated with EDP black finish for rust protection. This OEM style bumper...
1967-68 Ford Mustang; Front Bumper Mounting Bracket; Inner; Without Shelby; LH
Reproduction stamped steel bumper bracket for 1967-68 Mustang. This front bumper bracket is accurately produced to fit the LH (drivers side) inner position on a 1967-68 Mustang (except Shelby). Comes finished in a black EDP...
1999-04 Mustang; Front Bumper Reinforcement; EDP Coated
Reproduction front bumper reinforcement for 1999-04 Mustang models. Manufactured to factory specifications for proper fitment and function. Comes with EDP coating for rust and corrosion prevention. Note: Ships 2 OS.
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1994-98 Mustang; Front Bumper Reinforcement; EDP Coated
Reproduction of the original front bumper reinforcement designed for use with 1994-98 Mustang models. Manufactured to factory specifications for proper fitment and function. Come EDP coated for rust prevention. Note: Shipped...
1969 Mustang, 1969-70 Cougar; Front and Rear Bumper Bolt Mounting Set
Bumper Bolt Mounting Kit for 1969 Mustang. Concours correct with the right domed bolt tops, just like the original. Each kit contains all the mounting hardware necessary to mount both front and rear bumpers to the bumper...
1969-70 Mustang; Inner Front Bumper Mounting Bracket; LH Drivers Side
Reproduction of the original inner front bumper bracket designed for use with 1969-70 Mustangs. This bracket is accurately manufactured from quality stamped steel replicating the original in design and fitment. Fits the inner...
1969-70 Mustang; Inner Front Bumper Mounting Bracket; RH Passenger Side
Reproduction of the original inner front bumper bracket designed for use with 1969-70 Mustangs. This bracket is accurately manufactured from quality stamped steel replicating the original in design and fitment. Fits the inner...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1967-68 Mustang; Front Bumper Guard Pad Insert
Correct reproduction of the original rubber pad that inserts into the pre-drilled holes on 1967-68 Mustang Bumper guard. This bumper guard insert is manufactured with hardened rubber replicating the original Ford pad. Used in...
1969-70 Mustang; Outer Front Bumper Mounting Bracket; RH Passenger Side
Reproduction of the original outer front bumper bracket for use with 1969-70 Mustangs. This front bumper bracket is accurately produced to fit the RH (passenger side) outer position on a 1969-70 Mustang. Comes finished in a...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; LH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the LH (driver side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to protect...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; RH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the RH (passenger side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to...
1971-72 Mustang 18 Piece Front Bumper Bolt Mounting Set
This kit has the necessary hardware to install a 1971 or 1972 Mustang front chrome bumper. Attention to detail was taken to ensure that it fits and functions like the original. Set includes: 6 Chrome Bolts 6 U-nuts 6 Washers
1971-72 Mustang; Front License Plate Mounting Bracket; EDP Coated
Reproduction of the original front license plate bracket to mount a license plate to the front valance on 1971-72 Mustang. For use with a standard bumper, each bracket is produced in stamped steel and finished in EDP coating...
1967-68 Ford Mustang; Rear Bumper Guard; Black
Reproduction of the original 1967-68 rear bumper guard designed for 1967-68 Mustangs. This is a direct fit replacement of the original. Features holes that are needed in order to install the bumper guard rubber inserts (sold...
1971-72 Mustang (& 73 without Bumper Guards) Rear Bumper Mounting Set
This kit has all the necessary hardware to install a 1971, 1972 or 1973 Mustang rear bumper. (1973 is for use on Mustangs without bumper guards) Attention to detail was taken to ensure that it fits and functions like the...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
3/8"-16 X 1"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 3/8"-16 x 1" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction bumper bolt mounting kit for 1964-70 Mustang, 1967-68 Cougar, and 1966-77 Bronco models. Each kit contains enough mounting hardware to mount both front and rear bumpers to the bumper brackets. This 28 piece set...
1987-93 Mustang; Composite Front Bumper Reinforcement Support
Reproduction of the original srtle front bumper reinforcement support for 1987-93 Fox body models. Manufactured to factory specifications in rigid composite materials for proper fitment and function. Note: Ships Oversize 2.
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
1964-66 Mustang; Chrome Rear Bumper Guards; RH and LH; Pair
Quality reproduction of the original rear bumper guards designed for use with 1964-66 Mustang models. Each bumper guard is manufactured in stamped steel and triple chrome plated for a lusterous appearance. Sold in pairs....
1964-66 Ford Mustang; Rear Bumper Mounting Bracket; LH Or RH
This rear bracket connects to the tail light panel and the bumper. Made from high - quality steel and coated with a black paint finish, this OEM - style bumper bracket will make all the difference when replacing your rear...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
1964-66 Ford Mustang; Front Bumper Mounting Bracket; Inner; RH
Reproduction stamped steel bumper bracket for 1964-66 Mustang. This front bumper bracket is accurately produced to fit the RH (Passenger side) inner position on a 1964-66 Mustang. Comes finished in a black EDP coating to...
1964-66 Ford Mustang; Front Bumper Mounting Bracket; Inner; LH
Reproduction stamped steel bumper bracket for 1964-66 Mustang. This front bumper bracket is accurately produced to fit the LH (driver's side) inner position on a 1964-66 Mustang. Comes finished in a black EDP coating to...
1971-72 Ford Mustang; Front Fender to Bumper Filler Panels; with Brackets; Pair;
Reproduction front fender to bumper splash shield for 1971-72 Ford Mustang. These Front Fender to Bumper Fillers are designed from originals for a factory correct fit. Fits all cars with chrome front bumper. Molded PVC...
1967-68 Front Bumper Mounting Bracket LH Outer
Reproduction stamped steel bumper bracket for 1967-68 Mustang. This front bumper bracket is accurately produced to fit the LH (outer side) inner position on a 1967-68 Mustang. Comes finished in a black EDP coating to protect...
1967-68 Mustang (Except Shelby) Outer Front Bumper Mounting Bracket, RH
This front bumper bracket is accurately produced to fit the RH (passenger side) outer position on a 1967 - 1968 Mustang (except Shelby). Sold individually.
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
1967-68 Ford Mustang; Front Bumper Mounting Bracket; Inner; Without Shelby; RH
Reproduction stamped steel bumper bracket for 1967-68 Mustang. This front bumper bracket is accurately produced to fit the RH (passenger side) inner position on a 1967-68 Mustang. Comes finished in a black EDP coating to...
1967-68 Mustang Chrome Rear Bumper Guard Set - LH and RH
Reproduction chrome plated rear bumper guard for 1967-68 Mustang features the required holes that are needed in order to properly install the bumper guard pad. Fits RH and LH side, sold as a pair. The bumper guard pad is not...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
1967-68 Mustang; Rear Bumper Guard; Chrome; for use with Rubber Pad; Each
Reproduction of the original chrome plated rear bumper guard for 1967-68 Mustang models. Features the required holes that are needed in order to properly install the bumper guard pad. The bumper guard pad is available...
1967-68 Mustang; Bumper End to Fender Bracket: Passenger Side
Reproduction of the original fender-to-bumper-end-bracket designed for use with 1967-68 Mustang models (Except GT350/500). This bracket connects the front fender to the corner side of the front bumper. Produced in stamped...
1969-70 Ford Mustang; Rear Bumper Mounting Bracket; LH Or RH
Reproduction of the original rear bumper bracket that connects the rear tail light panel and the rear bumper. Manufactured from high quality steel and coated with EDP black finish for rust protection. This OEM style bumper...
1970 Mustang Bumper Bolt Mounting Kit Front & Rear (30 pcs)
1970 Mustang. Concours Correct with the right flat bolt tops,just like the original. Each kit contains all the mounting hardware necessary to mount both front and rear bumpers to the bumper brackets. 30 piece kit
1969-70 Mustang; Front License Plate Mounting Bracket
Reproduction of the original front license plate mounting bracket for mounting a license plate on the front valance of your 1969-70 Mustang or 1969 Cougar. It is produced in stamped steel for longevity and strength. Can be...
1969-70 Mustang; Outer Front Bumper Mounting Bracket; LH Drivers Side
Reproduction of the original outer front bumper bracket for use with 1969-70 Mustangs. This front bumper bracket is accurately produced to fit the LH (drivers side) outer position on a 1969-70 Mustang. Comes finished in a...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....
1973 Mustang; Front License Plate Bracket; with Urethane Bumper
Reproduction front license plate bracket to mount a license plate to the front valance ON 1973 Mustang models. For use with a urethane bumper. Each bracket is produced in stamped steel as original and finished in EDP coating....
7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.
Original Equipment Reproduction License Plate
Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.
M6-1.0 Metric Standard Flange Spin Lock Nut with Serrations; Pair
M6-1.0 metric standard flange spin lock nut with serrations. Sold as a pair.
1967-68 Ford Mustang; Bumper Guard Set; Rear; Black
Reproduction of the original 1967-68 rear bumper guards designed for 1967-68 Mustangs. This is a direct fit replacement of the original set. Each set features holes that are needed in order to install the bumper guard rubber...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Sold...
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...