Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade for 2nd design 1955 models and all 1956-59 Chevrolet and GMC truck models. Also correct as a replacement for a wide range of other makes and models, including 1955-57 GM passenger models...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1964-77 Ford F100,F150,F250,F350 Pickup Truck; Front Bumper; Chrome; without License Plate Holes
Reproduction of the front bumper for 1964-77 Ford F-Series pickup trucks including F100, F150, F250, and F350 models. Manufactured in heavy gauge cold rolled steel, this bumper is built to factory specifications and features...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1957-60 Ford F100, F250, F350 Pickup; Front Bumper; Paintable
Reproduction front bumper for 1957-60 Ford F-Series truck without license plate holes. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting brackets and...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1956 Ford Pickup; Back Window Glass; Big Window; Dark Gray Privacy Tint
Reproduction back glass for 1956 Ford pickup truck models. Replacing your broken or missing back glass with this quality reproduction will enhance the appearance and safety of your vehicle by helping you see clearly. Don't...
1956 Ford Pickup; Back Window Glass; Big Window; Clear
Reproduction back glass for 1956 Ford pickup truck models. Replacing your broken or missing back glass with this quality reproduction will enhance the appearance and safety of your vehicle by helping you see clearly. Don't...
1957-60 Ford F100, F250, F350 Pickup Truck; Front Windshield Glass; Light Green Tint
Reproduction of the original front windshield glass for use with 1957-60 Ford F100, F250, F350 pickup truck models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection...
1956 Ford F100, F250, F350 Pickup Truck; Front Windshield Glass; Tinted
Reproduction of the original front windshield glass for use with 1956 Ford F100, F250, F350 pickup truck models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction front windshield glass for 1956 Ford F100, F250, F350 pickup truck models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road debris. Each...
1967-72 Ford F100, F250, F350 Pickup; Front Inner Fender Apron; LH Driver Side
Reproduction front inner fender apron for 1967-72 F100, F250, F-350 pickup models with six cylinder, small block, or big-block V8 engines. This OE-style inner fender is designed as a direct fit replacement for Ford F-Series...
1967-72 F100, F250, F350 Pickup; Front Inner Fender Apron; Big Block Style; RH Passenger Side
Reproduction front inner fender apron for 1967-72 F100, F250, F-350 pickup models with big-block V8 engines. This OE-style inner fender is designed as a direct fit replacement for Ford F-Series trucks. It is constructed of...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction passenger-side front inner fender apron for 1967-72 F100, F250, and F-350 pickups with straight-6 or small-block V8 engines. This OE-style inner fender is designed as a direct fit replacement for Ford F-Series...
1980-86 Ford F150, F250, F350, Bronco; Front Bumper w/o Impact Strip Holes; Chrome
Reproduction of the original chrome front bumper for 1980-86 Ford F150, F250, F350, and Bronco models without impact strip holes. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes...
1980-86 Ford F-100, F-250, F-350 Styleside Pickup; Tailgate Shell; Without Lettering;
Reproduction tailgate for 1980-86 Ford F-Series pickup trucks. The main assembly is constructed from automotive-grade steel with durable EDM coating to prevent corrosion. It is often more cost-effective to replace a damaged...
1961-66 Ford F100, F250, F350 Truck; Hood Hinge Set; Pair; Black EDP Coated
Reproduction of the original hood hinges designed for use with 1961-66 Ford F-Series F100, F250, F350 pickup trucks. Each hinge is quality stamped steel manufactured to correct factory specifications. This hinge set comes...
1967-79 Ford F100, F150, F250, F350, F500 Pickup, 1978-79 Bronco; Front Windshield Glass; Clear
OER reproduction of the original front windshield glass for various 1967-79 Ford F100, F150, F250, F350 Pickup trucks, and 1978-79 Bronco models. This windshield is manufactured with tempered laminate safety glass that meets...
1953-56 Ford F100, F250, F350 Pickup; Front Inner Fender Apron; Passenger Side; EDP Coated
Reproduction of the original passenger-side front inner fender apron foruse with 1953-56 Ford F100, F250, F-350 pickup truck models. This OE-style inner fender is designed as a direct fit replacement for Ford F-Series trucks....
1964-72 Ford F-Series; Bumper Bracket Set; Rear; For StyleSide Truck; F-100 / F-250 / F-350
Reproduction 4-piece rear bumper bracket set for 1964-72 Ford F100, F250, and F350 StyleSide (Fleetside) Pickup Trucks. This set includes both driver and passenger side brackets and hardware. Replaces Ford part#s C4TZ-17787-A...
1961-64 Ford F100, F250, F350 Pickup; Front Inner Fender Apron; LH Drivers Side
Reproduction passenger-side front inner fender apron for 1961-64 F100, F250, and F-350 pickups. This OE-style inner fender is designed as a direct fit replacement for Ford F-Series trucks. It is constructed of high-grade...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
1948-72 Ford F1, F2, F-100, F-250 FlareSide Pickup; Rear Bumper; Plain; Paintable
Reproduction paintable rear bumper for 1948-72 Ford F1, F2, F-100, F-250 FlareSide (stepside) and 1973-77 4x4 F-250 FlareSide (stepside) trucks. This bumper features heavy gauge cold rolled steel construction with the correct...
1980-96 Ford F-Series Pickup, F-100, F-150, F-250, F-350; Rear Window Glass; 1/8" Tempered; Clear
Reproduction stationary flat back window glass for 1980-96 Ford F-Series truck including f-100, F-150, F-250, F-350 models. Each glass is manufactured with the proper shape, curvature, and pattern in factory equivalent 1/8'...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1964-77 Ford F-100 Truck; Front Bumper; With Square License Plate Holes; Paintable
Reproduction front bumper for 1964-77 Ford F100 models with square license plate holes. This bumper is manufactured to factory specifications in heavy gauge steel construction with the correct mounting holes for the factory...
1964-79 Ford F-Series Styleside Pickup, 1966-77 Bronco; Tailgate Support Set; Stainless Steel; Pair
Reproduction tailgate support for various 1964-72 Ford F100 and F250 and 1973-79 Ford F100, F150, F250, F350 Styleside pickup trucks and 1st generation 1966-77 Bronco. They are accurate replicas of the originals but are...
1967-72 Ford F-100, F-250, F-350 Truck; Upper Door Hinge; LH; Driver Side
Reproduction upper door hinge for 1967-72 F100, F250, and F350 pickup truck models. Each door hinge is manufactured in quality stamped steel construction replicating the original in design, appearance, fitment, and...
1967-72 F-100, F-250, F-350, F-Series Truck; Lower Door Hinge; RH; Passenger Side;
Reproduction lower passenger side door hinge for 1967-72 F100, F250, and F350 Pickups. This high quality hinge is specifically designed to replace the lower right hand side hinge on any light-duty F-Series Truck. It comes...
1967-72 Ford F-100, F-250, F-350 Truck; Upper Door Hinge; RH Passenger Side
Reproduction upper passenger side door hinge for 1967-72 F100 , F250, and F350 pickup truck models. Each door door hinge is manufacured in stamped steel to factory specification replicating the original in design, appearance,...
1973-79 Ford F100, F250, F350, 1978-79 Bronco; Inner Fender Mount Bracket Set; LH and RH
Reproduction inner fender to cab mounting bracket set for 1973-79 Ford F100, F250, and F350 truck, and 1978-79 Bronco models. Manufactured in stamped steel and finished in EDP primer, each set is designed to replicate the...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
Reproduction "Type 9" door mirror for 1973-79 Ford F-series pickup truck models. Each mirror assembly features the mirror glass, housing, bracket, and mounting hardware. This OE reproduction is reverse engineered to look, fit...
1953-55 Ford F-150, F-250, F-350 Truck; Door Window Regulator; Drivers Side
Reproduction of the original door window regulator designed for use with 1953-55 Ford F100, F250, and F350 pickup truck models. Each window regulator is manufactured in quality materials to factory specifications replicating...
1953-55 Ford F-150, F-250, F-350 Truck; Door Window Regulator; Passenger Side
Reproduction of the original door window regulator designed for use with 1953-55 Ford F100, F250, and F350 pickup truck models. Each window regulator is manufactured in quality materials to factory specifications replicating...
1973-79 Ford F-Series Regular Cab, 1978-79 Bronco; Radiator Core Support Mounting Ki; 10-Pieces
Correct reproduction front cab mounting kit for 1973-79 Ford regular cab truck. Each 10-piece set includes authentic looking copies of the factory cab support mounting bushings, spacers, bolts, and washers. Mounts the front...
1953-56 Ford F100, F250, F350 Pickup; Front Bumper To Arm Bracket Set; Chrome
Reproduction front bumper to arm brackets for use with 1953-56 Ford F100, F250, and F350 pickup truck models. Each bracket is manufactured in stamped steel replicating the original design and fitment. Features a bright...
1973-79 Ford F-100, F-250 Pickup, Bronco; Back Window Glass; Clear
Reproduction back glass for 1973-79 Ford pickup truck and 1978-79 Bronco models. Replacing your broken or missing back glass with this quality reproduction will enhance the appearance and safety of your vehicle by helping you...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-72 Ford F-Series Pickup, F-100, F-250; Back Window Glass; Clear
Reproduction back glass for 1967-72 Ford pickup truck models. Replacing your broken or missing back glass with this quality reproduction will enhance the appearance and safety of your vehicle by helping you see clearly. Don't...
1971-80 Ford/Mercury; Door Latch Assembly; Mustang/Torino/Cougar/F-100/F-150; LH
Reproduction door latch assembly for various 1971-80 Ford and Mercury models including Mustang, Cougar, and F-Series Trucks. This latch is constructed of high-quality metal and will attach to the door and grab the door latch...
1953-56 Ford F-100, F-250, F-350; Upper Or Lower Door Hinge; RH Or LH; 4 Required; Each
Reproduction of the original door hinge designed for use with 1953-56 F100, F250, F350 pickup truck models. Each door hinge is manufactured in heavy-duty stamped steel to correct factory specifications replicating the...
1961-66 Ford F-100, F-250, F-350 Truck; Upper Or Lower LH Door Hinge; Drivers Side
Reproduction of the original passenger side door hinge for 1961-66 F100, F250, F350 pickup truck models. This high quality hinge will replace the upper or lower door hinge on any light-duty F-Series truck. It comes with...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
1967-72 Ford F-150, F-250, F-350; Window Regulator; Manual; LH Driver Side
Reproduction door window regulator for 1967-72 Ford F100, F250, and F350 pickup truck models. Manufactured to factory specifications, each regulator replicates the original design, fitment, and functionality for proper...
1961-66 Ford F-100, F-250, F-350 Truck; Upper Or Lower Door Hinge; Passenger Side
Reproduction of the original passenger side upper or lower door hinge designed for use with 1961-66 Ford F100, F250, F350 pickup truck models. Each door hinge is manufactured in heavy-duty stamped steel to correct factory...
1973-79 Ford Pickup Truck, 1978-79 Bronco; Lower Door Hinge; LH or RH; Each
Reproduction upper door hinge for 1973-79 F100, F150, F250, F350 Pickup trucks and 1978-79 Bronco models. This high-quality hinge is manufactured in quality stamped steel, replicating the original in design and fitment. Will...
1957-60 Ford F-150, F-250, F-350 Truck; Window Regulator; Passenger Side
Reproduction of the original door window regulator designed for use with 1957-60 Ford F100, F250, and F350 pickup truck models. Each window regulator is manufactured in quality materials to factory specifications replicating...
1956 Ford F-Series Pickup, F-100, F-250; Door Window Glass; Tempered; Smoke Gray Tint
Reproduction front door glass window for 1956 Ford F-Series pickup trucks. Each glass panel is molded in tempered glass with the correct shape and curvature for a precise fit and authentic appearance. Replacing your original...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1980-86 Ford F100, F150, F250, F350, Bronco; Door Window Glass; Tinted; LH Drivers Side
OER reproduction of the original front door glass designed for use with 1980-86 Ford F Series pickup trucks, and Bronco models as listed. Each glass is manufactured with the proper shape, curvature, and pattern in OEM...