Reproduction of the original outer door handles designed for use with 1971-72 Dodge and Plymouth B-Body models. Replaces pitted, worn or inoperative door handle assemblies. These door handles are truly the finest...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1968-70 Mopar B-Body (Except Charger); Glass Set; Clear; Hardtop
This comprehensive glass set for 1968-70 Dodge and Plymouth 2 door hardtop models (except Dodge Charger) features CLEAR (untinted) glass without date coding or original markings. Set includes: Windshield LH and RH Vent Glass...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2-Door Hardtop, Coupe; Tinted
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2 Door Hardtop, Coupe; Clear
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop models. Replace your missing, scratched or broken original vent glass...
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade for 2nd design 1955 models and all 1956-59 Chevrolet and GMC truck models. Also correct as a replacement for a wide range of other makes and models, including 1955-57 GM passenger models...
1964-65 Dodge, Plymouth B-Body; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Tinted Glass; Crush Vinyl; Black
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you receive...
1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each
Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...
1966-67 Mopar B-Body; Sedan/Wagon; Windshield; Tinted With Shade
This replacement windshield is tempered laminate safety glass, designed to protect passengers from road debris. Available tinted. Each glass is professionally packed with extra care to prevent damage during shipping. Features...
1967-70 Dodge, Plymouth B-Body; Convertible Top; Crush; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
1956-64 Chrysler, Dodge, Plymouth; Convertible Top Motor and Pump Assembly
This OE style replacement motor and pump assembly features original style locations for electric and fluid connections. Fits a wide variety of 1956-64 Chrysler, Dodge, Plymouth, Imperial, and Desoto models including, but not...
1966 Dodge, Plymouth B-Body; Convertible Top; Pinpoint; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side
Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...
1966-67 Coronet/Belvedere II/Satellite; 2-Door Hardtop; Back Window Glass; Tinted
Replace your pitted, scratched or broken original back window glass with this new DOT certified replacement tempered safety glass. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...
Reproduction of the original back glass designed for use with 1968-70 Dodge Coronet, Plymouth Belvedere, Road Runner, Satellite, GTX, and Super Bird models. Manufactured with the proper shape, curvature, and pattern in OEM...
1973-74 Mopar B-Body Outer Door Mirror; RH ; Chrome (passenger side)
Reproduction of the original bullet-style drivers side door mirror designed for use on 1973-74 Mopar B-body models. Each mirror is a duplicate of the original in design and fitment. Includes a bright chrome polish that will...
1971-74 Dodge/Plymouth; B-Body; Door Hinge Set; 4 Piece Set
The doors on 1971-74 Dodge and Plymouth B-Body models were extremely heavy and hard on original hinges. Each hinge is manufactured to correct factory specifications that replicate the original in fitment, quality and design....
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Crush Grain; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Crush grain vinyl materials to ensure longevity and durability. Original manufacturing techniques...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Crush Grain; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques...
1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each
Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...
1966 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Pinpoint Vinyl; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1971-74 Mopar B & E-Body Chrome Bullet Outer Door Mirrors Pair
Freshen the look of your Mopar by replacing your pitted, damaged or missing original mirror with this brand new one. 3-1/4" mounting holes - outside to outside Features correct chrome plating, factory mounting style and...
OER reproduction windshield glass for various 1964-65 Dodge 330, 440, Polara, Coronet, and Plymouth Belvedere, Fury, and Savoy models. This windshield is manufactured with tempered laminate safety glass that meets the...
Replace the worn or rusted out rear convertible tack strip bow or rear tacking rail set with this quality reproduction. This 3 piece tack strip, also referred to as a trimstick set mounts below the rear window area inside the...
OER reproduction of the original front windshield glass for various 1966-67 Dodge and 1966-70 Plymouth B-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the standard for...
OER reproduction of the original front windshield glass for use with 1968-70 Dodge and Plymouth B-Body 2 door, hardtop and sedan models. This windshield is manufactured with tempered laminate safety glass that meets the...
1968-70 Dodge, Plymouth B-Body; Front Windshield Glass; 2 Door Hardtop & Sedan; Clear
OER reproduction of the original front windshield glass for use with 1968-70 Dodge and Plymouth B-Body 2 door, hardtop and sedan models. This windshield is manufactured with tempered laminate safety glass that meets the...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1965-74 Chrysler, Dodge, Plymouth; Windshield Washer Pump; Replacement
Replacement style windshield washer pump assembly designed for use with the applications listed below. The windshield washer pump circulates water from the windshield washer jar to the washer nozzles. This is a replacement...
1971-74 Dodge, Plymouth B & E-Body; Remote Outer Door Mirror; Drivers Side
Reproduction of the original style remote "bullet" mirror designed for use with various 1971-74 Dodge and Plymouth B, E Body models. Each mirror is manufactured in quality die-cast zinc featuring a primed and ready-to-paint...
1971-74 Dodge, Plymouth B/E-Body; Chrome Outer Door Mirror; Manual Bullet; Passenger Side
Reproduction of the original "bullet style" outer door mirror designed for use with various 1971-74 Dodge and Plymouth models. Each mirror is manufactured in quality die-cast zinc featuring a beautiful chrome plated surface....
1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each
Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...
1971-74 Dodge, Plymouth B/E-Body; Manual Bullet Outer Door Mirror; Paintable; Passenger Side
Reproduction of the original manual style bullet mirror designed to replace the damaged or worn out original on the passenger side door. Each mirror is designed to mount and install same as original and includes all hardware...
1971-74 Dodge, Plymouth B-Body; Windshield Wiper Arms; Anco Style; Pair
Correct reproduction of the Anco style wiper arms for 1971-74 B-body Dodge and Plymouth models. Made from stamped and formed polished stainless steel with a chrome plated cap. Add authenticity to your B-Body restoration with...
1967 Mopar B-Body 2 Door Hardtop/1967-70 Convertible Door Glass; Tinted; 3-Hole; LH
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. All glass is carefully packed by professionals to prevent damage...
1967 Mopar B-Body 2 Door Hardtop/1967-70 Convertible Replacement Door Glass; Tinted; RH
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. All glass is carefully packed by professionals to prevent damage...
1968-70 Dodge, Plymouth B-Body; Door Window Glass; 2 door Hardtop; Tinted; RH Passenger Side
Reproduction door glass for 1968-70 Dodge and Plymouth B-Body models. Each door glass is manufactured in tempered safety glass matching the original Mopar design. Glass is produced without date coding or original style...
This OER™ door glass designed for use with 1968-70 Dodge and Plymouth B-Body 2 door hardtop models as listed below. Each door glass is manufactured in tempered safety glass matching the original Mopar design. Glass is...
Reproduction hydraulic hose set designed to fit a wide variety of 1951-61 Cadillac, Chrysler, Plymouth, Dodge, and Ford convertible models as listed. Finding original style hose sets for your 1955-61 convertible is nearly...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction of the original outer door handles designed for use with 1973-74 Dodge and Plymouth B-Body 2-door coupe models. These are truly the finest reproduction handles in the market featuring the correct castings,...
1966 Mopar B-Body 2 Door Hardtop/Convertible Clear Replacement Door Glass; LH
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Note: All glass is carefully packed by professionals to prevent...
1966 Mopar B-Body 2 Door Hardtop/Convertible Clear Replacement Door Glass; RH
Replace your missing, scratched or broken original door glass with this new DOT (department of transportation) certified replacement tempered safety glass. Note: All glass is carefully packed by professionals to prevent...
1973-74 B-Body; 2-Door Coupe/2-Door Hardtop; Quarter Glass; Power; 3-Hole; RH; Tinted
Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by professionals...
1973-74 B-Body; 2-Door Coupe/2-Door Hardtop; Quarter Glass; Power; 3-Hole; LH; Tinted
Replace your pitted, scratched or broken original quarter glass with this new reproduction. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is carefully packed by professionals...
1966-67 Dodge, Plymouth B Body; Front Outer Door Handle Set; with Chrome Buttons
Reproduction of the original outer door handles designed for use with various 1966-67 Dodge and Plymouth B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome...