If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or...
Service replacement power steering gearbox manufactured to fit various 1965-93 Mopar applications. It may differ cosmetically from your original unit but will fit and perform as intended to replace the worn, damaged, or...
1956-80 GM, Mopar Truck; Power Steering Return Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1968-76 Chevrolet, GMC, Dodge 2 WD Truck; Power Steering Gear Box; 4-4.5 Turns
Replace a non working or worn out gear box with this quality reproduction power steering gear box for GM and Dodge trucks. Each gear box is completely tested for reliability and quality before leaving the factory, and is...
The Saginaw 140 manual steering gear box is a favorite among hot rodders, street rodders and racers alike. In production during a 7-year span from 1971-1977, the 140 gear box has a number of favorable attributes, including...
The Saginaw 140 manual steering gear box is a favorite among hot rodders, street rodders and racers alike. In production during a 7-year span from 1971-1977, the 140 gear box has a number of favorable attributes, including...
1980-93 Dodge, Plymouth D/W Series Truck, Ramcharger, Trailduster; Power Steering Gearbox
New, not remanufactured, power steering gear box for 1980-93 Dodge D/W-Series pickup trucks, Ramcharger, and 1980-81 Plymouth Trailduster SUV models. This steering box contains no remanufactured parts. It features an all new...
1965-76 Dodge, Plymouth; A, B, E-Body; Manual Steering Gear Box; Aluminum; 24:1 Ratio
Reproduction of the original style manual steering gear box for use with various 1965-76 Dodge and Plymouth A, B, and E body models. This reproduction steering gear box features the correct size and splined output shaft so...
Reproduction style power steering pump designed for use with various 1969-74 Chrysler, Dodge, Plymouth models with 225, 318, 340, 360 engines. If you're looking for a power steering pump for your classic vehicle and are...
1962-70 Dodge, Plymouth B-Body; Pitman Arm; Various Models; 1/8" Pitman Arm Shaft
Reproduction of the original pitman arm for 1962-70 Dodge and Plymouth B-Body models. Each reproduction pitman arm is manufactured to factory specifications featuring heat treated components and forging. Comes complete with...
Power Steering Return Hose; wthout Fittings; 3/8" x 48"; Cut to Fit; Various Models
Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...
1962-69 Dodge, Plymouth A & B-Body; Outer Tie Rod; RH or LH; Each
Reproduction of the original outer tie rod end designed for use with 1962-69 Mopar A-body and B-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for...
1961-2005 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap
Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...
1962-69 Dodge, Plymouth A & B Body; Inner Tie Rod with Hardware
Reproduction of the original inner tie rod end for select 1962-69 Dodge and Plymouth A-body and B-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for...
1967-74 Dodge, Plymouth; Power Steering Pressure Control Valve Body; 3/8" Dia. Return Hose
Authentic reproduction of the original power steering pressure control valve return fitting for the steering sector on 1967-74 various Dodge and Plymouth models. The return hose of the power steering pump attaches to this...
Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...
1970-76 Dodge, Plymouth; A, B, E-Body; Inner Tie Rod End
Is your steering loose or front end out of alignment? Parts in your steering system may be worn out or damaged. Now you can rebuild your classic's steering linkage system with this aftermarket replacement. Sold individually....
1970-76 Dodge/Plymouth A / B / E-Body; Tie Rod End; Outer
Is your steering loose or front end out of alignment? Parts in your steering system may be worn out or damaged. Now you can rebuild your classic's steering linkage system with this aftermarket replacement. Sold individually....
1962-66 Dart, Barracuda, Lancer, Valiant; Idler Arm; with hardware; Each
Reproduction idler arm for 1962-66 Dodge and Plymouth A-Body models. This hard-to-find steering linkage component is ideal for rebuilding your stock steering system, restoring proper steering geometry, and improving handling...
1968-74 Dodge, Plymouth B & E-Body; Idler Arm Assembly
Correct reproduction of the original idler arm assembly designed for use with various 1968-74 Dodge and Plymouth B and E body models. Each idler arm is manufactured in heavy cast material replicating the factory original in...
Universal Power Steering Return Hose; wthout Fittings; 3/8" x 24"; Cut to Fit
Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...
1965-66 Dodge, Plymouth; Power Steering Pressure Control Valve Fitting; 5/8" Return Hose
Authentic reproduction of the original power steering pressure control valve return fitting for the steering sector on 1965-66 various Dodge and Plymouth models. The return hose of the power steering pump attaches to this...
1963-74 Dodge, Plymouth B/E-Body; Disc Brake Conversion Bearing, Seal, and Hardware Set
This disc brake conversion wheel bearing and hardware set is for those who have puurchased our MN5006 brake spindle set or those who have purchased a mini-brake conversion set that utilizes 1976-80 Volare or Aspen calipers,...
1972-76 Mopar Power Steering Pressure Hose - with Chrysler or Federal Pump
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style; Various Models
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1973-81 Chrysler/Dodge/Plymouth B-Body; Tie Rod Adjusting Sleeve; OER Authorized
Is your steering loose or front end out of alignment? Parts in your steering system may be worn out or damaged. Now you can rebuild your classic's steering linkage system with this replacement tie-rod adjusting sleeve. Sold...
Service replacement power steering gearbox manufactured to fit a wide variety of 1962-72 Mopar applications. May differ cosmetically from your original unit but will fit and perform as intended as a replacement of your worn,...
1988-06 Chevrolet, GMC, Dodge Truck; Power Steering Gear Box; 3 to 3.5 Turns
Replace a non working or worn out gear box with this quality reproduction power steering gear box. This steering box contains no remanufactured parts. It features an all new main casting, sector shaft, and internals. Every...
1977-79 Chevrolet / GMC / Dodge Truck 2 WD; Power Steering Gear Box; 3 to 3.5 Turns
Replace a non working or worn out gear box with this quality brand new power steering gear box. Each gear box is completely tested for reliability and quality before leaving the factory. Interchanges with aftermarket part #'s...
1966-76 Dodge/Plymouth; Manual Steering Box; 16:1 Ratio; A / B / E-Body; Cast Iron
Brand new OER Authorized Mopar replacement manual steering box for 1966-76 A, B, and E-Body models. Here is the answer to that sloppy old manual steering box. This small sector cast iron box features a quicker ratio (16:1),...
1965-76 Dodge, Plymouth; A, B, E-Body; Manual Steering Gear Box; Aluminum; 16:1 Ratio
Reproduction of the original style manual steering gear box for use with various 1965-76 Dodge and Plymouth A, B, and E body models. This reproduction steering gear box features the correct size and splined output shaft so...
New, NOT rebuilt, reversed Corvair manual steering box. This style box is popular for use on Hot Rods and Customs with straight axle front suspension and traditional parallel steering setups. These all new boxes are...
1973-1976 Dodge, Plymouth B-Body; Steering Gear Box Power; Remanufactured; 1-1/4" Pitman Arm Shaft
This remanufactured power steering box is given a "cool dip finish" to protect critical areas from rust without affecting fit and function before new o-rings and lip seals are installed to ensure leak-free performance. Unit...
1975-79 Chrysler, Plymouth, Dodge; Power Steering Pump; Saginaw Style; with Reservoir
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
Reproduction of the original pitman arm for 1970-72 Dodge and Plymouth E-Body and 1971-72 Dodge and Plymouth B-Body models. Each reproduction pitman arm is manufactured to factory specifications featuring heat treated...
1959-82 AMC, GM, Ford; Steering Coupler; 3/4" Shaft; 36 Spline; 3-5/32" Diameter; Various Models
OER reproduction of the original steering coupling joint designed for use on various GM and Ford models. This coupler (rag joint) is required to connect the steering column to the steering box. Each steering coupler is...
1962-76 Dodge, Plymouth A, B, E-Body ; Tie Rod Adjusting Sleeve
Reproduction of the original outer tie rod end designed for use with 1962-76 Dodge and Plymouth A-body, B-body, and E-body models. This is a vital suspension component that is commonly worn and in need of replacement. They...
1965-73 Mopar C-Body Idler Arm
Restorer's Choice™ premium replacement idler arm for 1965-73 Mopar C-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for steering misalignment,...
2003-04 Mustang; Power Steering Pump with Reservoir; Remanufactured
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...
1969-72 Mopar with Saginaw Pump Power Steering Pressure Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
Reproduction steering coupling joint for a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the steering box. {specs} AMC models:...
Reproduction tie rod end dust boots with OE part number on the boots. Tie rod end dust boots measure approximately 1-3/16" on bottom, 1-1/4" on top & 1/2" hole. Sold as a set of 4. Fit a wide variety of 1959 & later GM makes...
Universal Power Steering Return Hose; wthout Fittings; 3/8" x 36"; Cut to Fit
Restore safe and reliable steering performance with this high-quality service replacement power steering return hose. A leaking or cracked hose can lead to fluid loss, steering fade, or even total loss of control - don't take...
1968-72 Mopar A-Body Replacement Idler Arm
Is your steering loose or front end out of alignment? Parts in your steering system may be worn out or damaged. Now you can rebuild your classic's steering linkage system with this aftermarket replacement. Applications:...
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style; for Saginaw Pumps
Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...
1973-2017 Chevrolet, GMC, Ford Truck; Tie Rod End Adjusting Sleeve; 1" Diameter; Various Models
Reproduction of the original outer tie-rod adjusting sleeve designed for use with various 1973-80 Chevrolet, GMC and Ford truck models as listed below. Each tie rod adjusting sleeve is manufactured to factory specifications...
Reproduction plated grease or zerk fittings designed for a variety of applications, including the replacement of worn or missing fittings on tie rod ends, center links, and other suspension or steering components. When...
1961-74 GM, 1968-74 AMC, 1963-74 Mopar; Saginaw Type Power Steering Pump; w/o Reservoir; New
OER Authorized power steering pump for use with various 1961-74 AMC, GM, and Mopar models with a Saginaw style power steering pump. Each pump is manufactured to correct OEM standard of quality. This new power steering pump is...
1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft
This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
OER Original Hue Steering Box Paint; Saginaw Blue / Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Original Hue Saginaw Blue-Gray paint is specifically formulated to perfectly match the factory colors of specific components installed on your vehicle at the factory. Unique shades are available so that you can...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...