1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each
Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...
1971-72 Dodge Charger, Coronet; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
Reproduction of the original wheel opening moldings designed for use with 1971-72 Dodge Charger and Coronet models. Each molding is manufactured to correct factory specifications resulting in an authentic appearance when...
1970-74 Dodge Challenger; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
American made reproduction of the original style wheel opening moldings designed for use with 1970-74 Dodge Challenger models. Each molding is manufactured in quality stamped aluminum featuring correct contours for an...
1970 Dodge Coronet R/T - Super Bee R/T Trunk Lid Molding
This factory-style replacement trunk lid molding for 1970 Coronet R/T and Super Bee R/T models fits on the rear section of the trunk lid and is contoured and stamped to correctly replace the original in both appearance and...
1968-70 Dodge, Plymouth; B-Body; Roof Drip Rail Molding Set; 6 Piece Set
Reproduction roof drip rail moldings for 1968-70 Dodge and Plymouth B-Body models. Each molding is manufactured in quality stainless steel to original factory dimensions for an authentic appearance and fit. Moldings run up...
1971-76 Dart Sport, Demon; Wheel Opening Molding Set; 2 Door; Coupe; 4 Piece Set
Reproduction of the original wheel opening moldings designed for use with 1971-76 Dodge A-body, 2 door, hardtop models. Each wheel opening molding is precision stamped to fit the vehicles contours exactly, and features the...
1972-74 Dodge Challenger Hood Lip Molding; Primed to Paint
Factory-style reproduction of the original hood lip molding designed for use on 1972-74 Dodge Challenger models. Each molding is manufactured in quality stamped aluminum and form fitted to match the original Mopar molding....
1966 Dodge Coronet Hood Lip Molding
Factory-style replacement hood lip molding for 1966 Coronet models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the original molding. Made...
1970-72 Dart; 1971-72 Scamp Trunk and Quarter Molding Set
Reproduction trunk lid molding set for 1970-72 Dart and Scamp models. Reproduced in aluminum with bright finish as original. Designed to fit the factory trunk lid and quarter panel contours. Hardware sold separately....
1968-70 Dodge Coronet; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; with Hardware
Reproduction of the original style wheel opening moldings designed for use with 1968-70 Dodge Coronet models. Each molding is manufactured in quality stamped aluminum featuring correct contours for an authentic appearance and...
1968-70 Dodge Charger; Wheel Opening Molding Set; 4 Piece Set
Reproduction wheel opening molding set for 1968-70 Dodge Charger models. Each molding is manufactured in quality stamped aluminum to original factory specifications. Each molding will fit the contour of the fender and quarter...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1971-74 Challenger Rear Trunk Lid Molding
Reproduction of the original trunk lid molding designed for use on 1971-74 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Replaces OE...
1968 Dodge Charger; Outer Tail Panel Molding Set; 4 Piece
Reproduction outer rear tail panel moldings for 1968 Dodge Charger models. Each molding is manufactured in quality stamped aluminum to factory specifications featuring correct contours that replicate the original design....
1967-75 Dart / Valiant Door Edge Guards - Pair
Reproduction of the original door edge guards designed for use on all 1967-75 Dodge Dart and Plymouth Valiant 2 door models. Each guard is manufactured to exact specifications. Will fit and install on the door as original,...
1970 Challenger Rear Quarter Extension Molding ; with Hardware ; RH
Reproduction of the original quarter extension molding designed for use on 1970 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Includes...
1970-1974 Challenger Wheel Opening Molding ; Front ; RH
Reproduction of the original wheel opening moldings designed for use on 1970-74 Dodge Challenger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1970-74 Barracuda, Cuda, Challenger; Trunk Lid Molding Hardware Set; with 3 Piece Molding Set
Reproduction of the original hardware designed to install the trunk lid molding for 1970-74 Mopar E-Body models. This hardware set is used to mount the 3-piece molding set that installs onto the deck lid and the rear quarter...
1968-70 Charger Wheel Opening Molding ; Rear ; RH
Reproduction of the original wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1968-70 Charger; Front Wheel Opening Molding; with Hardware; RH Passenger
Reproduction of the original front wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1967-76 Dodge Dart; Wheel Opening Molding; Front; LH Drivers Side
Reproduction of the original wheel opening moldings designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1967-76 Dart, Scamp Valiant A-Body; Rear Wheel Opening Molding; with Hardware; RH Passenger Side
Reproduction of the original wheel opening molding designed for use on various 1967-76 Dodge, and 1971-76 Plymouth A-Body models as listed. Each molding is manufactured in stamped aluminum to original factory contours...
1968-70 Coronet; Rear Wheel Opening Molding; with Hardware; RH Passenger Side
Reproduction of the original rear wheel opening molding designed for use on 1968-70 Dodge Coronet models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1968-70 Coronet; Front Wheel Opening Molding ; with Hardware; RH Passenger Side
Reproduction of the original front wheel opening molding designed for use on 1968-70 Dodge Coronet models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1968-70 Coronet; Rear Wheel Opening Molding; with Hardware; LH Drivers Side
Reproduction of the original rear wheel opening molding designed for use on 1968-70 Dodge Coronet models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1968-70 Coronet; Front Wheel Opening Molding; with Hardware; LH Drivers Side
Reproduction of the original front wheel opening molding designed for use on 1968-70 Dodge Coronet models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1967-76 Dart, Scamp Valiant A-Body; Rear Wheel Opening Molding; with Hardware; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1968-70 Dodge Charger; Rear Window Molding Clip Set; 20 Piece Set
Factory-style rear window molding clips for 1968-70 Dodge Charger models. Each set includes enough clips and screws to install a complete set of rear window moldings. Sold as a set that comes with 20 clips and 20 screws to...
1970-76 Dart, Demon, Duster; Windshield Molding Clip Set; 23 Pieces
Premier reproduction of the factory-style replacement front windshield molding clips designed for use on 1970-76 A-Body models. Each clip will replace the rusted or damaged original. These clips will attach the windshield...
Premier reproduction rear window molding clip set for various Mopar models. Each clip set will replace the rusted or damaged originals exactly. These clips will attach the rear window glass molding to the body. 22 piece clip...
Premier reproduction rear window molding clip set for 1971-73 Barracuda and Challenger coupe. This molding clip set is used to attach the moldings around the rear window to the body of the vehicle. Includes 18 clips, 2...
1966-67 Dodge, Plymouth B-Body; Rear Window Molding Clip Set; 2 Door Hardtop; 20 Piece Set
Premier rear window molding clips for 1966-67 Dodge or Plymouth B-Body 2-door hardtop models. These clips attach the rear window molding to the body. Complete set for 1966-67 Coronet models. Also found on the upper/lower...
1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces
Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...
Reproduction windshield and rear window molding clips for 1971-74 Dodge and Plymouth Charger, GTX, Road Runner, and Satellite 2 door coupe and 1971-73 C-Body models. Each clip set will replace the rusted or damaged original...
Factory-style reproduction front windshield molding lower clip and rear window clip for 1968-70 Dodge Charger, Coronet, Super Bee, and Plymouth Road Runner, Satellite, and GTX models. Each molding clip is designed to attach...
1970-76 Dodge, Plymouth A-Body; Rear Window Molding Clip Set; 12-Piece Set
OER Premier reproduction rear window molding clip set for 1970-76 Dodge and Plymouth A-body models. Each clip will replace the rusted or damaged original. These clips will attach the rear window molding to the body. Clips...
1971-77 Dodge/Plymouth A, B & E-Body; Metal Clip; For Rear Window Reveal Molding; Set of 24
Factory-style replacement rear window reveal molding clip. This steel clip measures 13/16" x 5/8". Replaces OE # 6002893. Set of 24 {specs} {fitment}
1974-76 Dodge/Plymouth A, B & E-Body; Windshield/Rear Window Reveal Molding Clip Set; Set of 24
Factory-style replacement windshield and rear window reveal molding clip for use with various 1974-76 Dodge & Plymouth A, B & E-Body models. Set of 24. Use as required. This steel clip measures 15/16" x 5/8". For individual...
1966-68 Dodge, Plymouth B, C-Body; Rear Window Molding Clip; Individual Clip
OER Premier rear window molding clip for 1966-67 Dodge or Plymouth B-Body and 1966-68 C-Body models. These clips attach the rear window molding to the body. Correct for 1966-67 Coronet models. Also, can be used on the...
1971-77 Dodge/Plymouth A, B & E-Body; Metal Clip Set; Rear Window Reveal Molding; Set of 12
Factory-style replacement rear window reveal molding clip. This steel clip measures 13/16" x 5/8". Set of 12. {specs} {fitment}
1964-70 Dodge, Plymouth B-Body; Rear Window Molding Clip; Individual Clip
OER Premier factory-style back glass molding clip for 1964-70 Dodge, Plymouth B-Body models (except Charger). This 3/4" x 1/2" steel molding clip is used to attach the back glass moldings around the rear window to the body of...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
1968-76 Chrysler, Plymouth, Dodge; Window Molding Clip; 2-Door Hardtop; Individual Clip
Reproduction window molding clip for a wide range of A, B, and C-Body Chrysler, Plymouth, Dodge models including 1968-76 Dart and Valiant hardtop models. Each clip will replace the rusted or damaged originals exactly. These...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1969 Dodge Dart; GTS; Rear Trunk Lid Panel Molding
Reproduction of the rear finish panel molding designed for the trunk of 1969 Dodge Dart GTS models. Each panel is manufactured in stamped aluminum, anodized and polished to perfection offering an authentic appearance and fit....
1966-67 Dodge Charger Tail Molding Set
Factory-style replacement tail panel molding set for 1966-67 Charger models. This set includes the trunk lid molding along with upper and lower tail panel moldings. Mopar Authentic Restoration™ Product Set does not...
1966-67 Dodge Charger, Coronet; Rocker Panel Moldings; Pair
Reproduction of the original rocker panel moldings designed for use with 1966-67 Didge Charger and Coronet models. Each panel is manufactured in quality stamped aluminum replicating the original configuration and appearance....
1973-74 Dodge Charger; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
Reproduction of the original wheel opening moldings designed for use with 1973-74 Dodge Charger models. Each molding is manufactured to correct factory specifications resulting in an authentic appearance when installed....
1967-76 Dodge Dart; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
American made reproduction of the original style wheel opening moldings designed for use with 1967-76 Dodge Dart models. Each molding is manufactured in quality stamped aluminum featuring correct contours for an authentic...
1968-70 Dodge B-Body Rocker Panel Moldings
These factory-style non-polished replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Measures 82" x 3". Made in USA. Each molding features proper finish and...
1970-71 Dodge Challenger Rocker Panel Moldings
These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...
1971-73 Dodge B-Body Rocker Panel Moldings
These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Will not fit Charger 500 models. Each molding features proper finish and...
1972-74 Dodge Challenger Rocker Panel Moldings
These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...
1970-74 Challenger Wheel Opening Molding Set
This factory-style replacement wheel opening molding set for 1970-74 Dodge Challenger models is manufactured to factory specs with original-quality materials for an authentic appearance. Sold as a set of 4. Mounting screws...
1968-70 Dodge Coronet; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
American made reproduction of the original style wheel opening moldings designed for use with 1968-70 Dodge Coronet models. Each molding is manufactured in quality stamped aluminum featuring correct contours for an authentic...
Reproduction of the original style outer sail panel moldings for use with 1966-67 Dodge Coronet, Plymouth Belvedere, GTX, and Satellite 2-door hardtop models. These outer sail panel moldings mount at the bottom of the sail...
1966-67 Dodge Charger; Lower Tail Panel Molding
Reproduction of the original lower tail panel molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured in quality stamped aluminum replicating the original design, appearance, and fitment. Each...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1966-67 Dodge Charger; Upper Rear Panel Molding
Reproduction of the original upper rear panel molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured to factory specifications, contoured and stamped correctly for a perfect fit. {fitment}