Product#: 2444442

1966-74 Chrysler, Dodge, Plymouth; Starter Relay

Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...


Product#: MD9341

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7 Terminals Plus Ground; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...


Product#: MD9340

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...


Product#: MD9337

1962-81 Mopar, AMC; Headlamp Switch; 7 Terminals Plus Ground; With 1-1/4" Rheostat

Reproduction headlamp switch for various 1962-81 Mopar A and B-Body models and other models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used on...


Product#: 3747529

1979-89 Chrysler, Dodge, Plymouth Car & Truck; Ignition Switch; with 11 Blade-Style Terminals; with Tilt Steering Wheel

Reproduction ignition switch for 1979-89 Mopar R, M & J-Body models & truck models with tilt steering wheel. Each switch is produced in stamped steel with an eleven-blade, plastic, rectangular connector and steel spring...


Product#: MD9343

1975-99 Chrysler, Dodge, Plymouth; Headlight Switch; 9-Terminal; with Ceramic Style Rheostat

Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with an older style ceramic rheostat with metal spring contact (rather than the newer printed circuit board style rheostat) for...


Product#: DS121

Headlamp Switch; 3 Position; Universal Fit

Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...


Product#: 4131367

1979-89 Chrysler, Dodge, Plymouth F/R/M/J-Car & Truck; Ignition Switch; with 11 Blade-Style Terminals; without Tilt Steering Wheel

Reproduction ignition switch for 1979-89 Mopar R, M & J-Body models & truck models without tilt steering wheel. Each switch is produced in stamped steel with an eleven-blade, plastic, rectangular connector and steel spring...


Product#: SW101

1960-84; GM, Chrysler, Dodge, Plymouth; Door Jamb Switch; Single Terminal; Each

Replacement single terminal door jamb switch designed for use on various models. Replace the old, damaged or non working door jamb switch with this quality service replacement. The door jamb switch will get your interior dome...


Product#: 1261219

1955-90 AMC, Chrysler, GM, Ford; Brake Lamp Switch; with 2 Terminals; w/o Cruise Control;

Reproduction of the original brake light switch designed for use with various 1955-1990 AMC, Chrysler, Dodge, Plymouth, General Motors, and Ford models as listed below. Activated by the brake pedal arm, this switch causes the...


Product#: 1881938

1959-84 Chrysler, Dodge, Plymouth; A, B & E-Body; Headlamp Dimmer Switch; Floor Mount

Reproduction headlamp dimmer switch for a wide variety of Chrysler, AMC, and other models. Flickering or non-functional headlamps could be the result of a burned out dimmer switch. Headlamp dimmer switches allow the driver to...


Product#: 1796260

1932-58 Chrysler, Ford, GM, Packard; Headlamp Dimmer Switch; 6 Volt

Correct 6 volt replacement dimmer switch for various 1932-70 classic Chrysler, Ford, GM, Packard, Studebaker, and various other American made vehicles including 1947-55 Chevrolet, GMC truck models. Fits a wide array of makes...


Product#: MD9342

1975-99 Chrysler. Dodge, Plymouth; Headlamp Switch; 9-Terminal; with Circuitboard Rheostat

Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with a printed circuit board style rheostat (rather than a ceramic rheostat with metal spring) for dimming the instrument lamps...


Product#: HR635

1973-1995 GM; Relay; Various Models; Horn Relay; Trunk Lid Relay; Power Antenna Relay; 3 Blade

Reproduction of the original style relay designed for use on various GM models. The relay was used for various years and applications including horn, power trunk lid and power antenna. The relay is considered an aftermarket...


Product#: 154691

12 Volt: Auxiliary Power Outlet; With Cover

Add an additional 12V power outlet to your vehicle with a universal fit 12 volt power outlet assembly with cover. The plastic cover prevents dirt and moisture from entering the socket. This dependable source of 12V power,...


Product#: 1995209

1976-78 Chevrolet Chevette; Headlamp Switch; Universal Fit;

Reproduction of the hard-to-find switch to replace original inoperative headlamp switch on 1976-78 Chevette. This reproduction switch will fit exactly as original and is designed as a service replacement for original GM part...


Product#: MX01133

H4 - 4 Headlamp System Wiring Upgrade Set

This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will be...


Product#: MX01131

9005/9006 - 4 Bulb System Wiring Upgrade Set

This OER Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will be...