Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2-Door Hardtop, Coupe; Tinted
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop or 2-door coupe models. Replace your missing, scratched or broken...
1975-79 Cordoba, Charger, Fury; Front Windshield Glass; 2 Door Hardtop, Coupe; Clear
Reproduction windshield glass for 1975-79 Chrysler Cordoba, 1975-78 Charger, 1978-79 Magnum, 1978 Monoco, 1975-78 Plymouth Fury, Road Runner 2-door hardtop models. Replace your missing, scratched or broken original vent glass...
1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless
Reproduction windshield wiper blade 2nd design 1955 models, and all 56-59 truck models. This blade is also correct replacement for a wide variety of other makes and models, including 1955-57 GM Passenger models Bel Air, 150,...
1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Vinyl Storage Bag
Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot vinyl storage bag. The storage bag will help protect your vehicles top boot while being stored in...
1956-64 Chrysler, Dodge, Plymouth; Convertible Top Motor and Pump Assembly
This OE style replacement motor and pump assembly features original style locations for electric and fluid connections. Fits a wide variety of 1956-64 Chrysler, Dodge, Plymouth, Imperial, and Desoto models including, but not...
1970-81 Trico-Style Windshield Wiper Blade; 3/16" Side Lock Connect; Satin Black; 18"; Pair
OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1966-71 Dodge, Plymouth; Hood Insulation Clip; Black Metal 1-3/4" x 1/2"; Each
Rproduction of the original hood insulation clip designed for use on various 1966-71 Mopar models. Clip is designed and manufactured in stamped steel to replicate the original. Will fit and function properly. This clip was...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Finding an original hose for your early convertible is next to impossible. If you own a convertible model...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
OER reproduction of the front windshield glass for use with various Chrysler, Plymouth and Dodge full-size C-Body passenger car models as listed. This windshield is manufactured with tempered laminate safety glass that meets...
OER reproduction front windshield glass for various 1976-89 Chrysler, Dodge, and Plymouth F-Body and M-Body 4 door sedan and station wagon models. This windshield is manufactured with tempered laminate safety glass that meets...
1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each
Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...