Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"
Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...
1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut
Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...
GM Headlamp Adjuster Screw And Nut Set - 8 Pieces
Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...
1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each
Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...
Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4
Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.
1947-57 GM Headlamp Adjusting Screw and Nut Set
Headlamp Adjustment screw set for various 1947-57 GM models including Bel Air, Nomad, and Pickup. The correct hardware will make your installation easier, and give your classic a finished look. Sets includes adjuster screws...
1999-2002 Chevrolet Truck; Headlamp Housing Support; Drivers Side
Reproduction of the original headlight housing support designed for use with 1999-02 Chevrolet Silverado models. The housing support is manufactured in ABS plastic to original factory dimensions. Will replace the original...
1967-68 Camaro/1962-68 Chevrolet Truck; Headlamp Adjuster Set
Reproduction headlamp adjuster set for 1967-68 Camaro and 1962-68 Chevrolet truck models. Each set has the 4 adjusting screws and nuts and the 2 springs, enough for both headlamps. Chevrolet Applications: 1967-68 Camaro...
1969-72 Chevrolet Truck; Headlamp Adjuster Set
Reproduction headlamp adjuster set for 1969-72 Chevrolet truck models. Each set has 4 adjusting screws and nuts and 2 springs, enough for both headlamps. Chevrolet Applications: 1969-72 C/K Pickup 1969-72 C/K Blazer 1969-72...
1965-80 GM; Various Models; Headlight Adjuster Set
The correct hardware will make your headlight adjustment hardware installation easier. Includes appropriate hardware for adjusting the headlamp. See applications below. Set includes adjusters for both right and left...
1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"
Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
1969-79 GM; Various Models; Headlamp Bulb Adjusting Spring
OER® reproduction headlamp bulb adjusting spring for 1970-73 Camaro, 1969-72 Chevy, GMC truck, 1971-72 Monte Carlo, 1971-75 Vega, and various GM models as listed. Manufactured from high quality carbon steel music wire as...
1976-1995 GM; Headlight Beam Adjuster Nut; 1/4"-28
This green 1/4"-28 nylon nut mounts directly to the headlamp housing and enables the headlamp beam to aimed correctly. Designed for GM vehicles with fiberglass headlamp panels. Fits a variety of GM vehicles from 1976-on....
1/4-28 GM Headlamp Adjuster Nylon Nut
Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68 Full...
1999-2002 Chevrolet Truck; Headlamp Housing Support; Passenger Side
Reproduction of the original headlight housing support designed for use with 1999-02 Chevrolet Silverado models. The housing support is manufactured in ABS plastic to original factory dimensions. Will replace the original...
Reproduction headlight assembly lower support bracket for 2007-13 Silverado 1500 or 2007-14 Silverado 2500HD, 3500 models. Manufactured in high impact injection molded black plastic, as original. Fits LH or RH side. Sold...
1947-57 Headlight Adjuster Set - 2 Headlamp Style
Don't get left in the dark! Replace your damaged or missing headlamp adjusters with these quality reproductions. Includes adjusters for both LH and RH headlamps. Applications: 1947-57 Chevrolet / GMC Trucks with 2 Headlamp...
1979-98 Chevy GMC Pickup, Blazer, Jimmy, Suburban; 1979-84 Van; Headlamp Mounting Spring; Each
Reproduction headlamp mounting spring for various GM models. This headlamp spring is used to mount the headlight beam. Fits 1979-84 Chevy Vans, and 1979-91 Chevrolet and GMC C/K and R/V pickup, Blazer, Jimmy, and Suburban...
1958-63 Headlamp Adjuster Hardware Set ; 64 Piece Kit
Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 64 Pieces - (8) adjusting screw, (8) plastic adjusting nut, (16) mounting screws with (16) washers and (16) nuts. 1 set is...