OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or...
1956-80 General Motors / Mopar Truck Power Steering Return Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1967-74 Camaro, Impala, Nova, El Camino; Power Steering Pulley; Deep Groove
Reproduction of the original style deep single groove power steering pulley designed for use with various 1967-74 Chevrolet models as listed. Each pulley is manufactured in stamped steel replicating the original dimensions...
1965-81 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose
Reproduction of the original power steering return hose for use with various 1971-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...
3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit
Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...
1961-79 Buick, Chevy, Olds, Pontiac; Power Steering Return Return Hose; Various Models
Service replacement power steering return hose for various 1970-76 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific design contours for ease of fitment. A leak in your power steering...
1963-64 Chevrolet / GMC 2 Wheel Drive 1/2 Ton Inner Tie Rod End; LH/RH
Is your steering loose or front end out of alignment? Parts in your steering system may be worn out or damaged. Now you can rebuild your classic's steering linkage system with this OER® reproduction. Sold individually....
1955-2002 GM; Steering Coupler Bolt; 12 Point; Grade 8; Each
Reproduction of the 12-point, grade 8 bolt that secures the steering coupler to the steering shaft on most GM vehicles. The original couplers came with a 12-point bolt in the location where tightening this bolt squeezes the...
1959-02 Steering Coupler Hardware Set; With 12-Point Bolt
Convenient set of hardware for steering shaft couplers on many GM vehicles. Set includes the (1) 3/8"-24 hex nut and lock washer and (1) 5/16"-24 nut and lock washer. Also includes the 12-point coupler bolt that secures the...
1960-79 GM Steering Coupler Repair Set ; Various Models
Reproduction of the original steering column coupler components commonly known as the rag joint. These special components can be a weak link between the steering column and the steering gear box. Each set includes the correct...
1965-68 Chevrolet; Power Steering Adjustor Bracket ; 283ci, 307ci, 327ci; Small Block
OER® reproduction of the original small block power steering adjustor bracket for use with various 1965-68 GM small block models. Manufactured in stamped steel, this bracket was original installed for a variety of...
1959-82 AMC, GM, Ford; Steering Coupler; 3/4" Shaft; 36 Spline; 3-5/32" Diameter; Various Models
OER reproduction of the original steering coupling joint designed for use on various GM and Ford models. This coupler (rag joint) is required to connect the steering column to the steering box. Each steering coupler is...
1965-70 GM; Impala, Chevy, Pickup, Blazer, Suburban; Inner Tie Rod End; with Hardware; RH or LH
Reproduction of the original inner tie-rod end designed for use with various 1965-70 GM models including 1965-68 Impala, Full Size, and 1965-70 Chevy and GMC truck models. Is your steering loose or front end out of alignment?...
1969-72 Chevrolet, GMC; Power Steering Adjust Bracket; Small Block; Car & Truck; Various Models
Correct reproduction of the original power steering bracket designed for use with various 1969-1972 Chevrolet models wirh small block engines. Each bracket is manufactured in stamped steel replicating the original...
1970-72 Chevrolet; Power Steering Bracket Set; Big Block; 2 Piece
This quality reproduction big block power steering bracket set is designed for use with 1970-72 models with a big block. The set includes the upper bracket stamped with OE # 3967420 and the lower bracket stamped with OE#...
Reproduction steering coupling joint for a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the steering box. {specs} AMC models:...
1960-75 Camaro, Impala, Nova, Truck; Power Steering Pump Pulley; Single Groove
OER® reproduction of the original power steering pump pulley designed for use with for various 1960-75 Chevrolet models as listed. Manufactured from formed and machined steel with the correct key way fit design and...
1971-79 Buick, Chevy, Olds, Pontiac; Power Steering Pressure Hose; Various Models
Reproduction of the original power steering pressure hose for use with various 1971-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...
Reproduction power steering pump bracket which is required when mounting the power steering pump on Big Block applications.
This is a quality OER® reproduction of the original power steering pump pulley designed for use on various GM applications..This pulley is manufactured to exact factory specifications and stamped with the original GM part...
1960-1972 Buick, Chevy, GMC, Pontiac, Oldsmobile; Power Steering Pump Cap; OEM Style; Various Models
Reproduction original power steering pump cap for various 1961-72 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models as listed. This is not a factory service replacement or aftermarket cap, this is a genuine reproduction...
1972-79 Buick, Chevy, Olds, Pontiac; Power Steering Pressure Hose; Various Models
Reproduction of the original power steering pressure hose for use with various 1970-76 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each hose is manufactured to specific factory dimensions replicating the original in...
Reproduction tie rod end dust boots with OE part number on the boots. Tie rod end dust boots measure approximately 1-3/16" on bottom, 1-1/4" on top & 1/2" hole. Sold as a set of 4. Fit a wide variety of 1959 & later GM makes...
Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit
Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...
Power Steering Pressure Line Clamp
This OER® line clamp is manufactured from die stamped steel. Each piece is plated in clear zinc to help protect it from rust and corrosion. Clip slips over the high pressure line and is secured to the gear box top cover...
1960-77 Power Steering Pulley Nut & Washer Set; for GM Models
Reproduction power steering pulley washer and nut for various 1960-77 GM models. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16"- 18. {fitment}
1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft
This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1970-81 GM; Motor Mount Bolt; 7/16"-14 x 4-5/8"; Stamped "RSC"; Each
Reproduction bolt used to mount the steering box to the frame. Will work on both power or manual steering boxes. This is a 7/16" bolt that is 4-5/8" long. The bolts are made from high strength grade 8 steel which as been...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
OER Original Hue Steering Box Paint; Saginaw Blue / Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® Original Hue Saginaw Blue-Gray paint is specifically formulated to perfectly match the factory colors of specific components installed on your vehicle at the factory. Unique shades are available so that you can...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...