1981-91 Chevy, GMC Pickup, Fleetside, Blazer, Suburban; Rear Tailgate Band Molding; without Emblem
Reproduction rear tailgate molding for 1981-91 Chevrolet and GMC pickup models with the deluxe exterior trim package. Each molding is manufactured in quality stamped aluminum, replicating the original in design, fitment, and...
1974-86 Chevy, GMC C/K Pickup, 1987-91 R/V; Drip Rail Retainer and Molding Kit; 4 Piece Set
Reproduction roof drip moldings and retainers for various Chevrolet and GMC C/K and R/V truck models. The drip rails on the cab of the 1973 and later pickup models initially began as optional equipment and only later (after a...
1974-91 Chevrolet, GMC Pickup Truck; Roof Rail Molding; Stainless Steel; LH Drivers Side
Reproduction roof drip molding for 1974-1986 Chevrolet and GMC C/K pickup trucks and 1987-91 R/V truck models. Each molding is stamped to replicate the original design and configuration using quality stainless steel. This...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
Reproduction of the original rear tailgate filler band panel molding for 1981-86 Chevrolet C/K and 1987-88 Chevrolet R/V pickup models. Each reproduction tailgate band is manufactured to correct factory specifications and...
1974-91 Chevrolet, GMC Pickup; Roof Drip Rail Molding; Stainless Steel; RH Passenger Side
Reproduction roof drip molding for 1974-1986 Chevrolet and GMC C/K pickup trucks and 1987-91 R/V truck models. Each molding is stamped to replicate the original design and configuration using quality stainless steel. This...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1962-87 GM; Wheel Well Molding Screw Set; Phillips; 8-18 x 3/8" L; 3/8" Head; Silver; 36 Piece Set
Reproduction of the original style screws designed for use with various GM models. This screw set can be used for all four wheel opening moldings. Replace your missing or worn out wheel well molding screws with this 36 piece...
1958-72 GM Retaining Screw; #8- 18 x 1/2"; Various Applications
Reproduction of the original retaining screw designed for use with a variety of different vehicles and fitments. Screw used to attach the headlamp retaining ring (secure the bulb) to the headlamp bucket on GM vehicles with 7"...
1969-70 Chevrolet Pickup, Blazer, Suburban; Inner Front Grill; Black
Reproduction front inner grill for 1969-70 Chevrolet Pickup trucks, Blazer and Suburban models. Each inner grill is manufactured in quality injection molded ABS replicating the factory original design for a perfect fit....
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Reproduction of the original grill emblem spacer used to mount the grill emblem on 1985-88 Chevrolet pickup trucks, Blazer, Suburban, and 1985-91 G1, G2, G3, Chevy vans. Each spacer is an injection-molded reproduction that...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
1973-80 Chevy, GMC Pickup, Blazer, Suburban, Jimmy; Grill Retainer Nut; Each
OER® reproduction of the original attaching grill nut designed for use on virtually all 1973-80 Chevrolet and GMC pickups, Jimmys and Blazers models. Each grill retainer nut is manufactured in injection molded ABS...
Injection-molded plastic reproduction emblem spacer that installs behind the Bow Tie emblem on some Chevrolet truck models. The spacer fills the void between the Bow Tie emblem and the grill center molding providing a clean...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...