Product#: 10182

Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide

This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Zinc plated tapping screw is needed. Sold individually.


Product#: *881344

1972 GM Truck Inner Door Skin Reinforcement Screw Set

Inner to outer door reinforcement screw and sleeve set for 1972 GM trucks. Located on the interior a few inches below the vent window, these screws helps secure the inner and outer door skins together. Set includes 2 chrome...


Product#: SK1014

1973 Chevy, GMC Pickup, Suburban; Underhood Hardware Set; 175 Piece Set

When it comes time to restore the underhood components and you want screws that match the original factory hardware, then this is the set you'll need. If you're spending too much time searching for, and cleaning up rusty or...


Product#: E275

1967-76 GM Car, 1967-91 GM Truck; Steering Wheel Retainer Screw Set; 9 Piece Set

Complete set of OE style screws for use on various 1967-1970 Chevrolet and Buick applications listed below. Set includes 9 OE style phillips head screws used to install a factory style Cushion, Comfort Grip, Rallye, or...


Product#: A13964

Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....


Product#: 4469195

Door Lock Striker Bolt Shim - 4.00MM Thick ; Each

Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...


Product#: *3917954K

1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models

Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...


Product#: 8770193

1965-2002 Buick, Chevy, Cadillac, Pontiac, Olds; Door Lock Striker and Washer; Each

Correct reproduction door lock striker and washer for various 1965-2002 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. Each striker is manufactured to correct factory specifications including correct...


Product#: K219

1938-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Bumper Bolt Set; Front or Rear; 1/2"-13 x 1-1/2; 10-Piece Bolt Set; Chrome

OER® reproduction bumper bolt, washer and nuts for 1947-1972 Chevrolet, GMC pickup truck, Blazer, Jimmy, Suburban models, and 1938-1954 Chevrolet passenger cars. Set features the correct chrome-plated carriage bolt with...


Product#: 748698

1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black

Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...


Product#: 6271829

1973-80 Chevy, GMC Pickup, Blazer, Suburban, Jimmy; Grill Retainer Nut; Each

OER® reproduction of the original attaching grill nut designed for use on virtually all 1973-80 Chevrolet and GMC pickups, Jimmys and Blazers models. Each grill retainer nut is manufactured in injection molded ABS...


Product#: A3404

Speed Nut 3/16" Self Thread Cutting - Small Washer - Each

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...


Product#: B1435

1958-63 Headlamp Adjuster Hardware Set ; 64 Piece Kit

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 64 Pieces - (8) adjusting screw, (8) plastic adjusting nut, (16) mounting screws with (16) washers and (16) nuts. 1 set is...


Product#: K5242

Shouldered Lens Screw ; Chrome Plated ; 6 Piece Set ; Turn Signal, Tail Lamp, Side Marker Lens

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...


Product#: *R404

Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...


Product#: *R406

Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...


Product#: 11502547

Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated

OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...


Product#: CX1493

1964-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Door Rubber Bumper Set, 4 Piece Set

OER® reproduction of the original door rubber bumpers designed for use on 1964-1986 C/K and 1987-91 R/V model Chevrolet and GMC pickup trucks. Each rubber stopper is designed to exact factory specifications for a perfect...


Product#: 7762203

1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each

This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...