1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1969 Camaro, Firebird, 1969-72 Nova Subframe Assembly; with TH400 Crossmember; OEM Style
Reproduction of the original complete sunframe assembly designed for use with 1969 Camaro, Firebird, and 1969-72 Nova models with TH 400 crossmembers. Why waste money trying to repair a damaged subframe that may be...
Leaf Spring U-Bolts; 3-1/4" Wide X 6-3/4" Long; Fits 3-1/4" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body
Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style
Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Inner and Outer Tie Rod Ends
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; Pair
Enhance the handling performance of your 1967-69 Camaro Firebird, or 1968-74 Nova model withthese quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1975-79 X-body Nova; Front End Rebuild Kit; With Inner and Outer Tie Rod Ends
Comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each component is manufactured by the original GM supplier or equivalent. Be sure you install what the factory...
1975-79 X-body Nova; Front End Rebuild Kit; With Outer Tie Rod Ends Only
This set includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential set when upgrading your...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-69 Camaro, Firebird, and 1968-79 Nova, 1971-77 Ventura, 1973-80 Omega, 1973-75 Apollo, 1975-80 Skylark models with multi-leaf springs. This essential bolt was...
Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"
Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6
Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...
1967-69 Chevrolet, Pontiac; Rear Axle Pinion Rubber Bumper, Each
OER reproduction of the rear axle pinion bumper for 1967 Camaro/Firebird (2nd design), 1968-69 Camaro, Firebird models, and 1968-69 Chevy II / Nova models. Manufactured from quality molded rubber offering an original...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1968-81 Rear Sway Bar/Anchor Plate Bolt - 7/16"-20 X 1-5/16"
Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-5/16" and is designed for models equipped with standard suspension. 4 bolts...
1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set
This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...
Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle. Has 2" Spacer {fitment}
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1969 Camaro, Firebird, 1969-72 Nova; Subframe Assembly; OEM Style; w/oTrans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high-quality Restorer's Choice™ reproduction. This reproduction subframe assembly is designed and...
1967-69 Camaro, Firebird; 1962-69 Chevy II Nova; Rear Leaf Spring Shackle; LH or RH Side; Each
Reproduction rear spring shackle for 1967-69 Camaro and Firebird models. Shackle is manufactured to OE specifications to replicate the original in appearance, quality, fit and design. Each shackle includes all the necessary...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-69 Camaro Z/28, Firebird 400, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-69 Camaro Z28 (302), 1968-81 Firebird 400 and performance models, Chevy II Nova and GM X-body models with 4 leaf rear springs. Each leaf spring...
Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1970-81 Rear Sway Bar/Anchor Plate Bolt And Nut
Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-15/16" and is designed for models equipped with the Heavy Duty (F41)...
1967-69 Camaro, Firebird, 1968-74 Nova; Tubular Control Arm Set; Upper
Enhance the handling performance of your 1967-69 Camaro Firebird, or 1968-74 Nova model withthese quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Front Sway Bar...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1967-69 Camaro, Firebird, Nova; Front Sway Bar Set; 1-1/8" Bar
Replacement sway bar designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Kit includes:...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1971-96 GM; Upper Control Arm Bushing; Various Models; Pair
Reproduction style upper control arm bushing designed for various 1971-96 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar; OE Design ; 7/8"; Silver Zinc Plating
Reproduction of the original design rear sway bar set for various 1968-74 GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II Nova, and 1973-74 GM X-body models. Features a gold zinc plated finish similar to the...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are an essential ingredient in maintaining control of the vehicle. Worn-out bushings are likely to effect the performance and handling of your classic. Replacing the old bushings can not only increase...
1970-96 GM Lower Control Arm Bumper, Each, Various Models
OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...
1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1973-91 Buick, Chevy, GMC, Olds, Pontiac; Sway Bar Bracket; Each; Various Models
OER® reproduction of the original style "U" shaped sway bar bushing clamp designed for use with various GM models. This bracket is manufactured from stamped steel and used to hold the inner sway bar bushings and the sway...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-69 Camaro, Firebird, 1962-69 Chevy II Nova; Leaf Spring Shackle Bushing Set; 8 Piece Set
Reproduction of the original style leaf spring shackle bushings for use with 1967-69 Camaro, Firebird, and 1962-69 Chevy II and Nova models. Replace your cracked, shrunken or worn out shackle bushings and bring your rear...
1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models
Reproduction of the rear axle pinion bumper for various GM models. Manufactured from quality molded rubber, with an integrated steel bracket in the correct OE configuration, offering an original appearance and fit. This...
1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1967-81 6 Piece Spring Eye Bracket Nut Kit
This is a quality OER® reproduction nut which is used to mount the leaf spring front eye bracket. Sold as a 6 piece kit. Applications: 1973-74 Buick Apollo 1975-79 Buick Skylark 1967-81 Chevrolet Cam aro 1968-79 Chevrolet...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...