1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
1968-72 Nova, 71-72 Ventura; Bumper Bolt Kit; Front & Rear; 64 Piece Set
Replace worn or rusted bumper bolts with this high-quality replacement set. Each kit includes 8 smooth head stainless steel capped bolts, 8 high-grade steel bolts, locking washers, and nuts-everything needed for a clean and...
1968-72 Chevy II, Nova; Rear Bumper Bracket; RH Passenger Side
Reproduction of the original rear bumper bracket designed for use with 1968-72 Chevy II and Nova models. Manufctured in quality stamped steel replicating the original configuration. Features correct mounting hole locations...
1968-72 Chevy II / Nova; Front Bumper Brackets; RH Passenger side; Pair
Reproduction of the original front bumper brackets designed for use with 1968-72 Chevy II and Nova models. Manufactured in stamped steel to correct dimensions featuring the proper mounting holes in the correct locations. Sold...
1968-72 Chevy II / Nova; Front Bumper Brackets; LH Drivers side; Pair
Reproduction of the original front bumper brackets designed for use with 1968-72 Chevy II and Nova models. Manufactured in stamped steel to correct dimensions featuring the proper mounting holes in the correct locations. Sold...
Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...
1968-72 Chevy II, Nova; Front Bumper Bracket Kit; 4 Piece Set
Restore proper front bumper alignment with this high-quality reproduction bracket set, designed for use on 1968?1972 Chevrolet Chevy II and Nova models. This complete 4-piece kit includes all necessary brackets to replace...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1966-71 Yenko; License Plate Frame; Hi-Performance by Yenko; Each
Reproduction 4-hole style Yenko® license plate frame featuring the brand's hometown name and the tagline, "Hi-Performance by Yenko®", which is what the Yenko® brand is all about. Each frame is produced in die-cast...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
Add the personalized touch to your restoration with Nova license frames. Frames include top or bottom mounting holes to fit any year. All license frames are manufactured in the USA and are produced in steel with triple chrome...
Add the personalized touch to your restoration with Nova license frames. Frames include top or bottom mounting holes to fit any year. All license frames are manufactured in the USA and are produced in steel with triple chrome...
Add the personalized touch to your restoration with Nova license frames. Frames include top or bottom mounting holes to fit any year. All license frames are manufactured in the USA and are produced in steel with triple chrome...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1970 Yenko Performance License Frame
This zinc die-cast and triple-chrome plated Official Yenko® license plate frame includes a blue background with bright white lettering with top and bottom mounting holes. Original style license plate frame that was used...
1971 Nova SS Red and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1975 Nova SS Blue and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1973 Nova Red and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1974 Nova Red and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1975 Nova Black and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1974 Nova SS Black and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1968-72 Chevy II, Nova; Rear Bumper Bracket; LH Driver Side
Reproduction of the original rear bumper bracket designed for use with 1968-72 Chevy II and Nova models. Manufctured in quality stamped steel replicating the original configuration. Features correct mounting hole locations...
1968-72 Chevy II, Nova; Front Bumper Filler Reinforcement; Steel Replacement
Reproduction front bumper to grill filler panel reinforcement for 1968-72 Chevy II, Nova models. Manufactured in stamped steel to exact factory specifications replicating the original in quality and design. Features correct...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
1966-71 Yenko; License Plate; Early Logo; Stamped Aluminum
License plate with Yenko® bar and shield logo can be installed on any original Yenko® vehicle. Each license plate is manufactured in quality stamped aluminum featuring the correct early "Yenko" logo in full color....
Add the personalized touch to your restoration with Nova license frames. Frames include top or bottom mounting holes to fit any year. All license frames are manufactured in the USA and are produced in steel with triple chrome...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....
1974 Nova Black and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1973 Nova Black and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1976 Nova Black and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1979 Nova Red and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
1978 Nova Red and Chrome License Plate Frame with White Lettering
Flaunt your Nova pride with this OER® custom license plate frame that shows off your vehicle year. Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes. Made in USA...
7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.
Original Equipment Reproduction License Plate
Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.
M6-1.0 Metric Standard Flange Spin Lock Nut with Serrations; Pair
M6-1.0 metric standard flange spin lock nut with serrations. Sold as a pair.
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
1955-77 Ford; Bumper Bolt; Stainless Steel Cap; 7/16-14 x 1-1/2"; Various Models; Box of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
5/16-18" x 3/4" Bolt; With Stainless Steel Cap; Each
Reproduction 5/16-18" x 3/4" bumper bolt with stainless steel cap for various Ford and other models. Perfect as a replacement for the small 1964-70 Mustang front bumper end mounting bolt. Sold individually. Specifications:...
7/16-14 x 1-1/2"; Bumper Bolt; Stainless Steel Cap; Each
Reproduction bumper bolt that measures 7/16-14 x 1-1/2" with a stainless steel cap and round head willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company models. Sold...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Set of...
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc chromate finish. Sold individually.
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1968-72 Chevy II, Nova; Front Bumper Filler Panel; Gray; Show Quality
OER reproduction of the original front bumper filler panel designed for use with all 1968-72 Chevrolet Chevy II and Nova models. This reproduction is manufactured in quality injection molded ABS material replicating the...
1968-72 Chevy II, Nova; Rear Bumper To Body Seal; Made in the USA!
Excellent reproduction of the original body seal strip designed for use with 1968-72 Chevy II and Nova models. This strip is designed to seal and fill the area where the rear bumper meets the body. This often damaged or...