Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1955-57 Chevrolet Wagon & Nomad; Fuel Tank Sending Unit; 3/8" Line
Reproduction fuel sender for your classic Chevy wagon or Nomad. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with...
1955-57 Chevrolet; Fuel Tank Sending Unit; For 9 Passenger Wagon; 5/16" Line
Reproduction fuel sender for your classic Chevy 9-passenger wagon. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1955-57 Chevrolet Station Wagon - Fuel Tank Support Straps - Steel (Pair)
Reproduction fuel tank mounting straps for 1955-57 wagon models. Produced using heavy duty zinc-plated material with all correct contours for an authentic fit and appearance.Approximate strap measurement bend to bend is - 32...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1955-70 Impala, Full Size; Fuel Tank Mounting Strap Hardware Set; 6-Pieces
Use proper mounting hardware to make your fuel tank installation job easier. This hardware set is the correct replacement fuel tank strap bolt set for 1955-70 full size Chevrolet models including 150, 210, Bel Air, Impala,...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1958-60 Impala, Bel Air, Biscayne; Fuel Tank Sending Unit; with 348 ci; 3/8" Inlet
Reproduction fuel tank sending unit for 1958-60 Chevrolet Impala and Full Size models with 348ci engines. Features the original design for an authentic fit and genuine appearance. Each sending unit includes the sender,...
1955-57 Chevrolet Bel Air, 150, 210, Nomad; Fuel Sending Unit & Filler Neck O-Ring
Reproduction of the original style fuel sending unit and filler neck O-ring designed for use with 1955-1957 Chevrolet Bel Air, 150, 210, and Nomad models. This O-ring is manufactured to correct factory dimensions and replaces...
1955-57 Chevy Bel Air, 150, 210; Station Wagon; Fuel Tank Support Straps; Stainless Steel
Reproduction fuel tank mounting straps for 1955-57 Chevrolet Bel Air station wagon models. Produced using stainless steel material with all correct contours for an authentic fit and appearance. Approximate strap measurement...
1955-57 Chevy Bel Air, 150, 210 Station Wagon, Nomad; Fuel Tank Sending Unit; 5/16" Line
Reproduction fuel tank sending unit for 1955-57 Chevrolet Bel Air, 150, 210 station wagon models (except 9 passenger) and Nomad models. Don't run out of fuel because of a defective sending unit. Replace that old worn out unit...
1958-60 Chevrolet; 6 Passenger Wagon, El Camino; Sedan Delivery; Fuel Sending Unit; with 3/8" Line
Reproduction fuel tank sender unit for 1958-60 Chevrolet 6-passenger station wagons, or 1959-60 El Camino models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge...
1958-60 Chevrolet Station Wagon / El Camino; Fuel Sending Unit; With 5/16" Line
Reproduction fuel sender for 1958-60 Chevrolet full-size wagon or 1959-60 El Camino. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel...
Reproduction of the original fuel tank mounting straps designed for use with 1958 Impala, Bel Air, Biscayne, Brookwood, and Nomad station wagon models. Each strap is manufactured in quality stamped steel, galvanized and EDP...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1962-81 GM; Fuel Tank Sending Unit Lock Ring; Small; 1-15/16"; Various Models
Correct reproduction fuel tank sending unit locking ring which secures the fuel tank sending unit to the gas tank. Replaces the original ring which are commonly destroyed when being removed. This ring helps to seal the...
1947-66 Chevrolet/GMC Truck; 1955-57 Bel Air, 150, 210; Fuel Tank Sending Unit Screw Set
Reproduction of the original fuel tank sending unit screws and washers designed for use with 1947-66 Chevrolet, GMC trucks, and 1955-57 Bel Air, 150, 210, and Nomad models as listed. Each set features 5 phillips head screws...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
Reproduction of the original fuel tank sending unit designed for use with 1955-57 Chevy Bel Air, 150, 210, Nomad, and 1931-62 Chevy and GMC pickup truck models. Correct replacement of the original fuel tank sending unit...
1956 Chevrolet Full-Size Passenger Cars - Fuel Neck To Body Grommet
Reproduction of the fuel neck to body grommet for 1956 Chevrolet car models. This rubber grommet cushions the filler neck as it passes thru the rear body panel. Sold individually, 1 required per car.
1955-57 Chevy Bel Air, 150, 210; License Lamp Wire Grommet & Sending Unit Wire Grommet; Each
Reproduction of the original style license lamp and sending unit wire grommet designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models as listed. Each grommet is manufactured in quality EPDM rubber...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1955-57 Chevrolet Bel Air, 150, 210, Nomad; Fuel tank Sending Unit Installation Set
Reproduction components necessary to Install the fuel tank sending unit for 1955-57 Chevrolet Bel Air, 150, and 210 passenger car models. This hardware set includes the sending unit gasket, O-ring, filler tank to neck O-ring,...
Reproduction of the original style components necessary to Install the fuel tank sending unit for 1949-1966 Chevrolet, GMC pickup truck, Suburbans, and 1958-1960 Impala, Bel Air, Biscayne, and full size models as losted. This...
1961-81 GM; Fuel Tank Sending Unit Gasket; Small; 1-13/16 ID; Various Models
Correct replacement fuel tank sending unit gasket for various 1961-81 Buick, Chevrolet, Oldsmobile and Pontiac models. This gasket installs between the sending unit and the locking ring. Gasket is manufactured to correct...