This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and Pontiac...
Reproduction 4-speed shifter and linkage assembly for 1968-72 Chevelle, Malibu, and El Camino models, as well as 1970-72 Monte Carlo, equipped with a Muncie 4-speed transmission. Manufactured to factory specifications, this...
1953-1990 GM; Speedometer Cable; 55"; Thread-On; Various Models; OER
Reproduction of the original lower speedometer cable designed for use with various 1953-1990 GM models as listed. Each cable is designed and manufactured to replicate the original in functionality. This cable measures 55" in...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 32 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fits various 1970-74 GM vehicles Including Chevrolet Chevelle, Buick...
Reproduction '621' 11" bellhousing kit for various models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For Chevrolet big block or small block engines equipped with an 11" clutch. Replaces original GM...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
Turbo 350; Transmission Dipstick And Tube; 27" Long
This chrome plated dipstick with tube for the GM turbo hydromatic 350 transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper...
700-R4 Firewall Mount Transmission Dipstick; Flexible
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models equipped with a factory center console. Manufactured to factory specifications,...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models without a factory center console. Manufactured to factory specifications, this...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8" center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
1969-90 GM; Speedometer Cable Retainer Clip; Various Models
Reproduction of the original speedometer cable retainer clip designed for use with various for 1969-90 General Motors vehicles. This retainer clip is manufactured in stamped steel replicating the original design. Retains the...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
Powerglide Transmission Dipstick; Firewall Mount; Flexible; Stainless Steel
You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. Each...
Kickdown Cable; with TH350 Trans; Stainless Braided; 55" long
Stainless steel transmission kick-down cable that fits TH350 transmissions with carburetor kick-down cable. Designed for 4 barrel-type carburetors and small block Chevrolet engines. Includes extender for more versatility in...
Reproduction speedometer cable and casing for 1958-68 GM models with screw-on style cable at both ends. Thread sizes are 7/8-18 female on one end and 5/8-18 female on the other. Each cable is manufactured to exact OE...
Reproduction speedometer cable for various 1958-68 GM applications with automatic transmission including Impala, GTO, Camaro, Skylark. This cable is a screw on type at both ends and is 57" long. If the speedo isnt working or...
1964-72 GM Models; Clutch Fork; 6 or 8 Cyl; Original Design; 10-3/8" Long
Manufactured to meet or exceed all original OEM specifications. Correct for small or big block. Exact replacement. Unlike others offered, ours functions perfectly for listed applications. GM Group #: 0.795 GM Part #: 3892632....
1966-90 Buick, Chevrolet, GMC, Pontiac, Oldsmobile; Speedometer Cable; 66"; Push-On Style; OER
Reproduction of the original speedometer cable designed for use with various 1966-1990 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. This reproduction speedometer cable is manufactured to original GM specifications...
Reproduction speedometer cable and casing for various 1966-91 models including Camaro, Firebird, Skylark, Cutlass plus Chevrolet & GMC trucks. Each cable is manufactured to correct factory specifications for proper fitment...
1967-90 Buick, Chevrolet, GMC, Pontiac, Oldsmobile; Speedometer Cable; 83"; Push-On Style; OER
Quality reproduction of the original speedometer cable designed for use with various 1967-90 GM applications including Regal, Impala, GTO, Camaro and Chevrolet & GMC Truck models. This complete speedometer cable assembly is...
1967-79 GM; Transmission Dipstick; TH350 Auto Trans; 27-1/8" Long; Various Models
Reproduction of the original turbo 350 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with...
Muncie 4-speed manual transmission shifter bracket for 1968-72 Skylark, Cutlass, Chevelle, El Camino and 1970-72 Monte Carlo models. This bracket is welded to the transmission crossmember and the shifter mounts to it. Used to...
1969-87 Chevy, Olds, Pontiac; Transmission Shifter Bracket; TH350/TH400 Trans; Various Models
Reproduction of the original shift lever designed for use with 1969-87 Chevrolet passenger car and truck models. This lever connects the automatic shifter cables and linkages to a TH350, or TH400 transmission. For use with a...
Reproduction of the original floor shift cable grommet for models with automatic transmission and a center console. This grommet fit various 1978-88 GM applications which include Grand National, El Camino, Cutlass and GTO....
Reproduction of the steering column lower arm lockout rod grommet/bushing with plastic insert for multiple GM vehicles. GM#'s 1394293 bushing - 22503153 insert. The bushing measures.410" ID x.640 OD. Nylon insert...
1978-2002 Buick, Chevrolet, Oldsmobile, Pontiac; Gearshift Handle Retainer
This clip for automatic shift levers attaches the shift knob to the lever. Highly recommended and needed when replacing your shift knob and button. Is usually damaged and non usable after replacement. Replaces GM #559974 and...
1970-79 Camaro, Skylark, LeMans, Cutlass; Bushing; Manual Transmission Shift Lever; Each
Replacement Transmission Shift Lever Bushing for various 1970-79 GM applications which include Camaro, Skylark, Cutlass and Regal models. These are an exact reproduction of the original GM bushing, part number # 1234418. Sold...
1962-83 Buick, Chevy, GMC, Olds, Pontiac; Speedometer Cable; 73" Long; Thread-On
Quality reproduction of the original speedometer cable designed for use with various 1962-83 Buick, Chevrolet, Oldsmobile, and Pontiac models. This complete speedometer cable assembly is manufactured to correct factory...
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
1964-1990 Buick, Chevy, Pontiac, Olds; Speedometer Cable; 69"; Push-On Style; OER
Reproduction of the original speedometer cable designed for use with various 1964-1990 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. This reproduction speedometer cable is manufactured to original GM...
1964-1981 Chevrolet; Clutch Housing / Flywheel Cover ; for 11" Bellhousing
Reproduction of the original style clutch housing and flywheel cover plate designed for use on a variety of 1964-81 Chevrolet models as listed. Manufactured in stamped steel to original specifications that replicate the...
Replacement transmission crossmember for automatic or manual transmissions for various 1968-72 GM applications including Monte Carlo, Skylark, and GTO convertible models. This style of crossmember uses rubber pads that bolts...
Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions
Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...
1964-83 Chevrolet; Bell Housing; High Performance; 11"; Aluminum; Standard Duty
Reproduction of the original '621' 11" bellhousing for various 1964-83 Chevrolet models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For big block or small block engines equipped with an 11" clutch....
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
1963-2001 GM; Transmission Mount; Black Polyurethane; Zinc Finish; 1-15/16" Tall
Chemicals, excessive movement and overall time in general can take it's toll on one of the most crucial components of your driveline, the transmission mount. Once available only in degradable rubber compound, this mount is...
1967-1979 GM; Torque Converter Cover; Turbo 350; For Starter Mounted on RH Driver Side
Reproduction torque converter cover (also called a flexplate/flywheel cover) for various 1967-79 GM vehicles with TH350 transmissions and a 153 tooth flex plate. Each cover is manufactured in injection molded ABS replicating...
1968-72 Camaro, Impala, Caprice, Chevelle; Horseshoe Shifter Handle; with TH350, TH400 Trans
OER® reproduction of the original shifter handle designed for use with various 1968-72 Chevrolet models equipped with a center floor console and a Horseshoe style shifter with TH350 or TH400 transmission. Each shifter...
1963-72 Powerglide Transmission Lower Kickdown Rod
The lower kickdown rod which was used on 1967-1972 Camaro models with factory installed V8 engines and Powerglide transmissions, is a commonly forgotten link in your vehicles drive train. This rod mounts between the...
Very good reproduction shift lever/arm 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications that do not...
Great reproduction 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications with bucket seats and that do have...
Reproduction torque converter cover for 1976-87 GM models with a TH200 (MV9) or TH200-4R (MW9) transmission. Each torque converter cover is manufactured in stamped steel to original factory specifications featuring correct...
OER® reproduction of the original transmission control cable bracket that holds the transmission control cable for 1973-81 models with automatic transmissions and a center console. This steel bracket mounts to the drivers...
Speedometer Cable and Casing; For Clip Retained on Speedometer Side; Push-On Style; 46" Long
Reproduction speedometer cable and casing for 1969-later GM models with clip-on style cable end at the speedometer end. Each cable is manufactured to exact OE specifications. Features correct fittings with clip on style...
1970-81 Firebird, Trans Am; Shift Knob; Automatic Trans; w/o Emblem
Reproduction of the original shift knob designed for use with 1970-81 Pontiac Firebird, Trans Am, and various 1973-77 Chevrolet models equipped with an automatic transmission. This reproduction knob features a rubber grip...
Replacement transmission crossmember brackets for various 1964-72 GM models including LeMans, Cutlass, and Skylark models. These are the bracket that mount the transmission crossmember to the frame on each end. See vehicle...
1964-79 GM; Transmission Dipstick; TH400 Auto Trans; 24-1/8" Long; Various Models
Reproduction of the original TH400 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with obsessive...
1970-81 Pontiac Firebird, 1973-81 Chevrolet Camaro; Shift Cable; Seal/Boot
This seal replaces the gearshift control cable seal on various GM vehicles including 1973-1981 Chevrolet Camaro and 1970-1981 Pontiac Firebird models with automatic transmissions and floor console gearshifts. Manufactured...
1968-72 TH400 Transmission Control Cable Bracket
Reproduction automatic transmission control bracket for TH400 transmission with console.
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
This is the finest gearset kit on the market. This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 70-74 Chevrolet Chevelle, Buick, Skylark, and...
Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set
Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
Reproduction of the commonly worn out nylon pedal bushings designed for use with a variety of 1971-1991 GM car and truck models as listed. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft...
Reproduction brake and clutch pedal pad for various 1964-1991 Buick, Chevy, Pontiac, and Oldsmobile models with manual transmissions. Each pedal pad is manufactured in EPDM rubber to factory specifications and replicates the...
Reproduction Steering Lock Out Swivel Insulator Bushing for 1969-72 GM A-Body, F-Body, and X-Body vehicles. Keep your steering lock-out system tight and rattle-free. Don't let a worn or missing insulator ruin the precise feel...
Restore smooth, factory-correct steering lock-out operation in your '69?'72 GM A, F, and X-body and bring back the crisp, positive action of your classic GM column with this precision-formed Steering Lock-Out Swivel Spring....
1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"
OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...