1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1981-88 Monte Carlo; Hood Hinge and Spring Assembly; RH
Reproduction RH hood hinge and spring assembly for 1981-88 Monte Carlo models. Manufactured in stamped steel to factory specifications, this hinge assembly restores proper hood alignment and smooth opening and closing...
1971-75 Chevrolet and Oldsmobile; Hood Release Cable and Handle; 2 Piece Style
Reproduction hood latch release cable and handle assembly for 1971-75 Chevrolet and Oldsmobile models. This cable is manufactured to factory specifications and replicates the original in quality, design, and fitment. Includes...
Reproduction of the original hood hinge assembly designed for use on various 1970 Chevrolet models. Each hood hinge is manufactured in stamped steel to original factory specifications assuring a quality replacement. Finished...
1973-77 Chevrolet Malibu, Monte Carlo, Olds Cutlass; Hood Hinge; LH Driver Side
Replacement hood hinge for various 1973-77 GM applications including Malibu, Monte Carlo and Cutlass. Replace the old or damaged with this brand new quality Replacement. Does not include the hood hinge spring. LH - driver...
1977-2005 Buick, Chevy, Pontiac, Oldsmobile;;Hood Latch Assembly; Various Models
Reproduction hood latch assembly for various 1977-2005 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed below. Each latch is designed as a direct replacement for the worn or inoperative original....
Reproduction of the original hood hinge assembly designed for use with 1978-88 GM A and G Body models. Each hood hinge is manufactured in stamped steel to original factory specifications featuring correct dimensions for an...
1970-72 Chevelle, El Camino, Monte Carlo; 1971-72 GMC Sprint; Hood Latch Catch Assembly; Upper
Reproduction upper hood latch catch assembly for 1970-72 Chevelle, El Camino, and Monte Carlo, as well as 1971-72 GMC Sprint models. Manufactured in stamped steel to factory specifications, this assembly replicates the...
Reproduction of the original hood latch assembly designed for use with various GM models equipped with the release mechanism located inside the passenger compartment of the vehicle. Each hood latch is designed and...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1977-87 Caprice, Impala, 1977-86 El Camino, Monte Carlo; Hood Latch Pop-Up Spring; Various Models
Replacement hood latch pop-up spring for multiple 1977-87 GM applications including 1977-87 Chevrolet Caprice, Impala and 1977-86 El Camino, Monte Carlo models. This is the spring that mounts to the hood latch and pops the...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
1970-2002 GM; Hood Insulation Fastener; Each
Replacement black nylon hood insulation fastener is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models. It...
Reproduction hood hinge spring for various GM models including Chevelle, Camaro, Impala, Firebird and other various GM models. Each spring is designed and manufactured to exact factory specifications for the models listed...
1966-79 Buick, Chevy, Pontiac, Oldsmobile; Hood Hinge Spring; Each; Various Models
Correct replacement hood hinge spring designed for use with various 1966-79 GM models with a standard hood. Each hood hinge spring is manufactured in quality spring steel that matches the OE tension ratio. Overall length: 8...
Reproduction hood hinge and spring assemblies for 1970-72 Chevelle, El Camino, and Monte Carlo, 1970 Impala, Bel Air, and Biscayne, as well as 1971-72 GMC Sprint models. Manufactured in stamped steel to factory...
1981-88 Monte Carlo; Hood Hinge and Spring Assembly; LH
Reproduction LH hood hinge and spring assembly for 1981-88 Monte Carlo models. Manufactured in stamped steel to factory specifications, this hinge assembly restores proper hood alignment and smooth opening and closing...
1958-77 GM; Hood Adjuster Bolt and Nut Set ; 5/16"-18 x 1-3/8"; Various Models
Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...
1970-72 Chevelle, Malibu, El Camino; 1971-72 GMC Sprint; Hood Latch Assembly; Replaces GM# 3975406
Reproduction hood latch assembly for 1970-72 Chevelle, Malibu and El Camino models. Each hood latch assembly is manufactured in stamped steel to factory specifications featuring correct contours for an authentic appearance...
1978-87 Buick, Chevrolet, Oldsmobile, Pontiac A, G-Body; Hood Latch Release Cable; Various Models
Reproduction hood latch release cable for various 1982-87 Buick, Chevrolet, Oldsmobile, and Pontiac A and G-Body models. Each cable is produced to factory specifications and designed to replace the original exactly. Features...
1973-77 Chevrolet Malibu, Monte Carlo, Olds Cutlass; Hood Hinge; RH Passenger Side
Replacement hood hinge for various 1973-77 GM applications including Malibu, Monte Carlo and Cutlass. Replace the old or damaged one with this brand new quality Replacement. Does not include the hood hinge spring. RH -...
Reproduction of the original hood hinge assembly designed for use on various 1970 Chevrolet models. Each hood hinge is manufactured in stamped steel to original factory specifications assuring a quality replacement. Finished...
1965 Nova, 68 Impala, 67-72 Chevelle, 70-72 Monte Carlo; Hood Hinge Spring; Each
The hood hinge spring is an important part of the hood hinge assembly. Replace the old worn-out hood springs on your GM vehicle with this quality reproduction. Each spring is manufactured to original specifications and...
Reproduction of the original hood hinge assembly designed for use with 1978-88 GM A and G Body models. Each hood hinge is manufactured in stamped steel to original factory specifications featuring correct dimensions for an...
1970 Chevelle, Malibu, El Camino, 1970-72 Monte Carlo; Hood Latch Support
Reproduction hood latch support for 1970 Chevelle, Malibu, and El Camino, as well as 1970-72 Monte Carlo models. Manufactured in stamped steel to factory specifications, this support panel provides proper mounting and...
1970-72 Chevrolet Chevelle, El Camino, Monte Carlo; Hood Release Handle
Reproduction of the original hood latch release rod handle designed for use with 1970-72 Chevelle, El Camino and Monte Carlo models. Each rod is manufactured in quality stamped steel replicating the original in configuration,...
Universal Hood Pin Rubber Gasket; Each
Reproduction hood pin rubber gasket found on models with hood pins. Each gasket is die-cut to the proper dimension. This gasket will also fit a wide variety of aftermarket hood pins. Sold individually. Use as required. Check...
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1980-2016 GM; Outer Hood Adjust Rubber Bumper; Each; Various Models
Reproduction of the original molded rubber hood adjustment bumper located on the outer hood for various 1980-2002 GM models. This reproduction molded rubber bumper is manufactured to original specifications for an authentic...
1967-69 Camaro, Firebird; Hood Insulation Fastener Set; 20 Piece Set; Various Models
When it comes to restoring your GM classic, the smallest details often make the biggest difference. These reproduction hood insulation fasteners are the perfect finishing touch for your underhood restoration. Correct in every...
Universal Chrome Hood Pin Set; Flip-Over Style; with Landyards
Universal hood pin set for various models. Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. This universal style hood pin set includes pine,...
Chrome Hood Pin Set; Hair Pin Style
Reproduction of the deluxe style hood pin set with hair pin design. Set includes all necessary components to replace the original hood pin including 2 hairpin style hood pins, 2 plates, 4 bolts and 8 mounting screws. Lanyards...
Universal Chrome Deluxe Hood Pin Set; Flip-Over Style; without Lanyards
Reproduction hood pin set with 1/4" "flip over" hood pin design. Set includes all necessary components to replace the original hood pin including 2 "flip over" style hood pins, 2 plates, 4 bolts and 8 mounting screws. Can be...
Hood Pin Kit; with Lanyard; Hair Pin Style; Universal Fit
Hood pins are necessary for the attachment of fiberglass or lift off hoods and may be installed for extra security on factory hoods. Each set uses the two piece hairpin style pins ideal for installations where a...
Hood Insulation Fastener Set; Nylon; 2" Square Head; 1/4" Stem Dia.; 9/16" Stem Length; 20 Piece Set
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement...
1963-72 Chevy, Pontiac; Hood Hinge Springs; Polished Stainless; RH & LH; pair; Various Models
Add a custom touch to your hood hinges with these brightly polished stainless steel hinge springs for 1963-64 Chevy II, Nova, 1967-69 Camaro SS 350 & 396 optioned hood, 1967-70 Firebird, 1963-66 Impala, Bel Air, Biscayne,...
Hood Pin Lanyard; Plastic Coated Cable; Universal Fit
Strong and ready for installation on any vehicle requiring hood pin lanyards. This design can be used for any muscle car or classic truck that requires lanyards for hood pin retention. Plastic coated design is strong and long...
1967-69 Camaro, Firebird; Plastic Clip Set; Radiator Support To Hood Seal; 9 Piece Set
Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate
Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...
1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models
Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...