1967-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green
This reproduction nylon molding clip will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
1967-85 GM, 1967-81 Camaro, Firebird; Molding Clip Set; Front or Rear Window; Steel; Set of 24
Replacement windshield and rear window molding steel clips to fit a wide variety of applications on various GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary...
1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...
1972-85 GM; Molding Clip Set; For Windshield or Rear Window Molding; Steel; Set of 24
Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...
1962-76 Chevrolet, Buick, Oldsmobile; Rocker Molding Clip Set; with Screws; 24 Piece Set
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and...
1975-90 GM, 1977-79 Nova; GM X-Body; Glass Molding Clip Set; Nylon; 14 Piece Set
Replacement style window glass molding installation clips for 1977-1979 Nova and GM X-body. Fits a wide variety of applications on other GM models, too. Each clip is designed to replicate OE style clips providing a snug fit...
1975-90 GM, 1977-79 Nova / X-Body; Windshield Molding Clip Set; Nylon Type; 14 Piece Set
Replacement style front window glass molding installation clips for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
1980-87 GM; Molding Clip; For Rear Window Molding; Nylon; 7/8" X 1-1/5"; White; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1965-72 GM; Windshield, Back Window Molding Clip; Each
Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...
1975-81 GM, 1975-88 AMC; Windshield/Back Glass Molding Clips; 1-1/2" Wide X 1/2" Tall; White Nylon
Reproduction front window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clip providing a snug fit for the molding. This clip...
1962-1976 GM; Rocker Panel Molding Retainer; Each
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water buildup between the rail and rocker...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1975-81 GM, 1975-88 AMC; Windshield/Back Glass Molding Clip Set; 1-1/2" x 1/2"; White Nylon; 24 pcs
Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clip set providing a snug fit for the...
1965-72 GM; Windshield, Quarter, Back Glass Molding Clip Set; 25 Piece Set
Oldsmobile Windshield Molding Clips: 1965-1968 442 (except convertible) 1965-1968 Ninety-Eight (except convertible) 1965-1968 Cutlass (except convertible) 1965-1968 Delta 88 (except convertible) 1967-1968 Delmont 88 (except...
1964-71 Chevrolet; Rear Glass Molding Clip Set; Square Style; 24 Piece Set
OER®replacement rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model. For individual clips (1), refer to part...
1964-71 GM; Molding Clip Set; Windshield, Quarter, Back Window; OE Design; 24 Piece Set
OER®reproduction of the OE style, rounded edge design, rear window glass molding clips for various GM models as listed. Each clip set includes 24 molding clips. Number of clips required may vary depending on the model....
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Stamped Steel; 24 pcs
Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each set will provide a snug fit for the molding being attached. The amount of clips will vary depending on the...
Reproduction front windshield and back window molding retainer clip set for a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is required. Each clip...
1975-90 GM; Molding Clip; Nylon; 15.25mm x 30.5mm; Light Green; 24 pcs
This reproduction nylon molding clip set will provide a snug fit for the molding that is being attached to the vehicle. Popular applications are listed below, but may fit additional GM models. Fits a wide variety of GM...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1969-85 GM; Retaining Clip; For Front or Rear Window Molding; Steel; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1967-81 GM; Molding Retainer Clip; Various Models & Applications
Reproduction molding clip for various GM models. These special clips are used to install a variety of moldings including the applications listed below. Sold individually. Use as required. Buick Applications: 1976-1979 Buick...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair
Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Hex Flanged Stamped Steel Thread Cutting Nut;.88mm Diameter; With Mastic Sealant; Set of 8
Reproduction stamped steel thread cutting nut set for a variety of applications including for use to secure the tail light bezels on 1974-78 Firebird and other models. Can be used anywhere on your car where a 1/4" post...
Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;
Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head
Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...